Pechini method used in the obtention of semiconductor nanoparticles based niobium

The (Nb2O5) niobium pentoxide compound was synthetized by Pechini method. The followed synthesis protocol is promising to obtain 2O5 nanoparticles, in orthorhombic phase. This phase was obtained in the samples calcined at 600°C for 2 hours and the submitted at 500°C for 22 hours in gas flow. For the...

Full description

Autores:
Raba Paez, Angela Mercedes
Suárez, Diego Nicolas
Martínez, José Jiobani
Rojas-Sarmiento, Hugo Alfonso
Rincón Joya, Miryam
Tipo de recurso:
Article of journal
Fecha de publicación:
2015
Institución:
Universidad Nacional de Colombia
Repositorio:
Universidad Nacional de Colombia
Idioma:
spa
OAI Identifier:
oai:repositorio.unal.edu.co:unal/60764
Acceso en línea:
https://repositorio.unal.edu.co/handle/unal/60764
http://bdigital.unal.edu.co/59096/
Palabra clave:
62 Ingeniería y operaciones afines / Engineering
Nb2O5
Nanoparticles
thermal treatment
characterization
Raman.
Rights
openAccess
License
Atribución-NoComercial 4.0 Internacional
Description
Summary:The (Nb2O5) niobium pentoxide compound was synthetized by Pechini method. The followed synthesis protocol is promising to obtain 2O5 nanoparticles, in orthorhombic phase. This phase was obtained in the samples calcined at 600°C for 2 hours and the submitted at 500°C for 22 hours in gas flow. For the phase determination and crystal structure was performed XRD. The BET method was used to obtain surface area measurements of the obtained oxide. Raman scattering was employed in order to analyze the nanostructures vibrational spectrum and FEG-SEM in order to study the morphology of the obtain oxides.