Implementación de un método de búsqueda exhaustiva para la reconfiguración de sistemas de distribución de energía eléctrica
La reconfiguración de sistemas de distribución de energía eléctrica se realiza cambiando el estado de dispositivos de apertura o cierre presentes en la red, para modificar la topología de la misma con el fin de reducir las pérdidas de potencia en el sistema. Este trabajo presenta la implementación d...
- Autores:
-
Camacho Martinez, Juan Rafael
- Tipo de recurso:
- http://purl.org/coar/version/c_b1a7d7d4d402bcce
- Fecha de publicación:
- 2016
- Institución:
- Universidad Industrial de Santander
- Repositorio:
- Repositorio UIS
- Idioma:
- spa
- OAI Identifier:
- oai:noesis.uis.edu.co:20.500.14071/35266
- Palabra clave:
- Sistemas De Distribución
Reconfiguración De Redes
Búsqueda Exhaustiva
Reducción De Pérdidas
Operación Radial
Flujos De Potencia.
The network reconfiguration in distribution systems is realized by changing the status of sectionalizing switches on the network
to modify the topology of the same one in order reduce the power loss in the system. This work presents the implementation of a method of exhaustive search to find the configuration that maximizes the efficiency
in addition there is realized the search of the configuration that minimizes the percentage of voltage regulation of the system. The implemented algorithm establishes all the possible combinations in the conditions of the switching devices
which allows the activation of as many sections of line as points of load the system has
with what in radial operation the supply is guaranteed to all the points of load. Later there is evaluated for every possible opposing configuration the condition of radial operation
rejecting those that do not fulfill it; to find the efficiency and the percentage of voltage regulation of the system in every approved configuration
there was implemented the method of sweep - sum of currents to evaluate the flow of power; once the efficiency is computed
the percentage of voltage regulation for every configuration determines the one that achieves the fulfillment of the raised aims. The algorithm is tested in a system of 33 nodes and 37 sections of line
- Rights
- License
- Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
id |
UISANTADR2_c84a446c2e4e54cbdd8b4380e21a6aef |
---|---|
oai_identifier_str |
oai:noesis.uis.edu.co:20.500.14071/35266 |
network_acronym_str |
UISANTADR2 |
network_name_str |
Repositorio UIS |
repository_id_str |
|
dc.title.none.fl_str_mv |
Implementación de un método de búsqueda exhaustiva para la reconfiguración de sistemas de distribución de energía eléctrica |
dc.title.english.none.fl_str_mv |
Distribution Systems, Network Reconfiguration, Exhaustive Search, Loss Reduction, Radial Operation, Power Flows. |
title |
Implementación de un método de búsqueda exhaustiva para la reconfiguración de sistemas de distribución de energía eléctrica |
spellingShingle |
Implementación de un método de búsqueda exhaustiva para la reconfiguración de sistemas de distribución de energía eléctrica Sistemas De Distribución Reconfiguración De Redes Búsqueda Exhaustiva Reducción De Pérdidas Operación Radial Flujos De Potencia. The network reconfiguration in distribution systems is realized by changing the status of sectionalizing switches on the network to modify the topology of the same one in order reduce the power loss in the system. This work presents the implementation of a method of exhaustive search to find the configuration that maximizes the efficiency in addition there is realized the search of the configuration that minimizes the percentage of voltage regulation of the system. The implemented algorithm establishes all the possible combinations in the conditions of the switching devices which allows the activation of as many sections of line as points of load the system has with what in radial operation the supply is guaranteed to all the points of load. Later there is evaluated for every possible opposing configuration the condition of radial operation rejecting those that do not fulfill it; to find the efficiency and the percentage of voltage regulation of the system in every approved configuration there was implemented the method of sweep - sum of currents to evaluate the flow of power; once the efficiency is computed the percentage of voltage regulation for every configuration determines the one that achieves the fulfillment of the raised aims. The algorithm is tested in a system of 33 nodes and 37 sections of line |
title_short |
Implementación de un método de búsqueda exhaustiva para la reconfiguración de sistemas de distribución de energía eléctrica |
title_full |
Implementación de un método de búsqueda exhaustiva para la reconfiguración de sistemas de distribución de energía eléctrica |
title_fullStr |
Implementación de un método de búsqueda exhaustiva para la reconfiguración de sistemas de distribución de energía eléctrica |
title_full_unstemmed |
Implementación de un método de búsqueda exhaustiva para la reconfiguración de sistemas de distribución de energía eléctrica |
title_sort |
Implementación de un método de búsqueda exhaustiva para la reconfiguración de sistemas de distribución de energía eléctrica |
dc.creator.fl_str_mv |
Camacho Martinez, Juan Rafael |
dc.contributor.advisor.none.fl_str_mv |
Carrillo Caicedo, Gilberto |
dc.contributor.author.none.fl_str_mv |
Camacho Martinez, Juan Rafael |
dc.subject.none.fl_str_mv |
Sistemas De Distribución Reconfiguración De Redes Búsqueda Exhaustiva Reducción De Pérdidas Operación Radial Flujos De Potencia. |
topic |
Sistemas De Distribución Reconfiguración De Redes Búsqueda Exhaustiva Reducción De Pérdidas Operación Radial Flujos De Potencia. The network reconfiguration in distribution systems is realized by changing the status of sectionalizing switches on the network to modify the topology of the same one in order reduce the power loss in the system. This work presents the implementation of a method of exhaustive search to find the configuration that maximizes the efficiency in addition there is realized the search of the configuration that minimizes the percentage of voltage regulation of the system. The implemented algorithm establishes all the possible combinations in the conditions of the switching devices which allows the activation of as many sections of line as points of load the system has with what in radial operation the supply is guaranteed to all the points of load. Later there is evaluated for every possible opposing configuration the condition of radial operation rejecting those that do not fulfill it; to find the efficiency and the percentage of voltage regulation of the system in every approved configuration there was implemented the method of sweep - sum of currents to evaluate the flow of power; once the efficiency is computed the percentage of voltage regulation for every configuration determines the one that achieves the fulfillment of the raised aims. The algorithm is tested in a system of 33 nodes and 37 sections of line |
dc.subject.keyword.none.fl_str_mv |
The network reconfiguration in distribution systems is realized by changing the status of sectionalizing switches on the network to modify the topology of the same one in order reduce the power loss in the system. This work presents the implementation of a method of exhaustive search to find the configuration that maximizes the efficiency in addition there is realized the search of the configuration that minimizes the percentage of voltage regulation of the system. The implemented algorithm establishes all the possible combinations in the conditions of the switching devices which allows the activation of as many sections of line as points of load the system has with what in radial operation the supply is guaranteed to all the points of load. Later there is evaluated for every possible opposing configuration the condition of radial operation rejecting those that do not fulfill it; to find the efficiency and the percentage of voltage regulation of the system in every approved configuration there was implemented the method of sweep - sum of currents to evaluate the flow of power; once the efficiency is computed the percentage of voltage regulation for every configuration determines the one that achieves the fulfillment of the raised aims. The algorithm is tested in a system of 33 nodes and 37 sections of line |
description |
La reconfiguración de sistemas de distribución de energía eléctrica se realiza cambiando el estado de dispositivos de apertura o cierre presentes en la red, para modificar la topología de la misma con el fin de reducir las pérdidas de potencia en el sistema. Este trabajo presenta la implementación de un método de búsqueda exhaustiva para encontrar la configuración que maximiza la eficiencia, además se realiza la búsqueda de la configuración que minimiza el porcentaje de regulación de tensión del sistema. El algoritmo implementado establece todas las posibles combinaciones en los estados de los dispositivos de cierre y apertura, que permitan la activación de tantos tramos de línea como puntos de carga tenga el sistema, con lo que en operación radial se garantiza la alimentación a todos los puntos de carga; posteriormente se evalúa para cada posible configuración encontrada la condición de operación radial, descartando aquellas que no lo cumplan; para hallar la eficiencia y el porcentaje de regulación de tensión del sistema en cada configuración aprobada, se implementó el método de barrido suma de corrientes para evaluar el flujo de potencia; una vez encontrada la eficiencia y el porcentaje de regulación de tensión para cada configuración se determina la que logra el cumplimiento de los objetivos planteados. El algoritmo es probado en un sistema de 33 nodos y 37 tramos de línea |
publishDate |
2016 |
dc.date.available.none.fl_str_mv |
2016 2024-03-03T22:46:50Z |
dc.date.created.none.fl_str_mv |
2016 |
dc.date.issued.none.fl_str_mv |
2016 |
dc.date.accessioned.none.fl_str_mv |
2024-03-03T22:46:50Z |
dc.type.local.none.fl_str_mv |
Tesis/Trabajo de grado - Monografía - Pregrado |
dc.type.hasversion.none.fl_str_mv |
http://purl.org/coar/resource_type/c_7a1f |
dc.type.coar.none.fl_str_mv |
http://purl.org/coar/version/c_b1a7d7d4d402bcce |
format |
http://purl.org/coar/version/c_b1a7d7d4d402bcce |
dc.identifier.uri.none.fl_str_mv |
https://noesis.uis.edu.co/handle/20.500.14071/35266 |
dc.identifier.instname.none.fl_str_mv |
Universidad Industrial de Santander |
dc.identifier.reponame.none.fl_str_mv |
Universidad Industrial de Santander |
dc.identifier.repourl.none.fl_str_mv |
https://noesis.uis.edu.co |
url |
https://noesis.uis.edu.co/handle/20.500.14071/35266 https://noesis.uis.edu.co |
identifier_str_mv |
Universidad Industrial de Santander |
dc.language.iso.none.fl_str_mv |
spa |
language |
spa |
dc.rights.none.fl_str_mv |
http://creativecommons.org/licenses/by/4.0/ |
dc.rights.coar.fl_str_mv |
http://purl.org/coar/access_right/c_abf2 |
dc.rights.license.none.fl_str_mv |
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) |
dc.rights.uri.none.fl_str_mv |
http://creativecommons.org/licenses/by-nc/4.0 |
dc.rights.creativecommons.none.fl_str_mv |
Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) |
rights_invalid_str_mv |
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) http://creativecommons.org/licenses/by/4.0/ http://creativecommons.org/licenses/by-nc/4.0 Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) http://purl.org/coar/access_right/c_abf2 |
dc.format.mimetype.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidad Industrial de Santander |
dc.publisher.faculty.none.fl_str_mv |
Facultad de Ingenierías Fisicomecánicas |
dc.publisher.program.none.fl_str_mv |
Especialización en Sistemas de Distribución de Energía Eléctrica |
dc.publisher.school.none.fl_str_mv |
Escuela de Ingenierías Eléctrica, Electrónica y Telecomunicaciones |
publisher.none.fl_str_mv |
Universidad Industrial de Santander |
institution |
Universidad Industrial de Santander |
bitstream.url.fl_str_mv |
https://noesis.uis.edu.co/bitstreams/48daa053-a1cf-40cf-af41-938ee40994a1/download https://noesis.uis.edu.co/bitstreams/68373994-58a7-4823-899e-e384319975c6/download https://noesis.uis.edu.co/bitstreams/f38f404a-9c73-442b-849c-3ba9489cbdad/download |
bitstream.checksum.fl_str_mv |
58727742cd550ff5db5ca209477d4fb6 3c949fa401bca61cee09ed6aa717ab71 69bc3608e5ce850a0c119ec4f283a5af |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
DSpace at UIS |
repository.mail.fl_str_mv |
noesis@uis.edu.co |
_version_ |
1812187068962439168 |
spelling |
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)http://creativecommons.org/licenses/by/4.0/http://creativecommons.org/licenses/by-nc/4.0Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)http://purl.org/coar/access_right/c_abf2Carrillo Caicedo, GilbertoCamacho Martinez, Juan Rafael2024-03-03T22:46:50Z20162024-03-03T22:46:50Z20162016https://noesis.uis.edu.co/handle/20.500.14071/35266Universidad Industrial de SantanderUniversidad Industrial de Santanderhttps://noesis.uis.edu.coLa reconfiguración de sistemas de distribución de energía eléctrica se realiza cambiando el estado de dispositivos de apertura o cierre presentes en la red, para modificar la topología de la misma con el fin de reducir las pérdidas de potencia en el sistema. Este trabajo presenta la implementación de un método de búsqueda exhaustiva para encontrar la configuración que maximiza la eficiencia, además se realiza la búsqueda de la configuración que minimiza el porcentaje de regulación de tensión del sistema. El algoritmo implementado establece todas las posibles combinaciones en los estados de los dispositivos de cierre y apertura, que permitan la activación de tantos tramos de línea como puntos de carga tenga el sistema, con lo que en operación radial se garantiza la alimentación a todos los puntos de carga; posteriormente se evalúa para cada posible configuración encontrada la condición de operación radial, descartando aquellas que no lo cumplan; para hallar la eficiencia y el porcentaje de regulación de tensión del sistema en cada configuración aprobada, se implementó el método de barrido suma de corrientes para evaluar el flujo de potencia; una vez encontrada la eficiencia y el porcentaje de regulación de tensión para cada configuración se determina la que logra el cumplimiento de los objetivos planteados. El algoritmo es probado en un sistema de 33 nodos y 37 tramos de líneaEspecializaciónEspecialista en Sistemas de Distribución de Energía EléctricaImplementation of a method of exhaustive search for the reconfiguration of a distribution network.application/pdfspaUniversidad Industrial de SantanderFacultad de Ingenierías FisicomecánicasEspecialización en Sistemas de Distribución de Energía EléctricaEscuela de Ingenierías Eléctrica, Electrónica y TelecomunicacionesSistemas De DistribuciónReconfiguración De RedesBúsqueda ExhaustivaReducción De PérdidasOperación RadialFlujos De Potencia.The network reconfiguration in distribution systems is realized by changing the status of sectionalizing switches on the networkto modify the topology of the same one in order reduce the power loss in the system. This work presents the implementation of a method of exhaustive search to find the configuration that maximizes the efficiencyin addition there is realized the search of the configuration that minimizes the percentage of voltage regulation of the system. The implemented algorithm establishes all the possible combinations in the conditions of the switching deviceswhich allows the activation of as many sections of line as points of load the system haswith what in radial operation the supply is guaranteed to all the points of load. Later there is evaluated for every possible opposing configuration the condition of radial operationrejecting those that do not fulfill it; to find the efficiency and the percentage of voltage regulation of the system in every approved configurationthere was implemented the method of sweep - sum of currents to evaluate the flow of power; once the efficiency is computedthe percentage of voltage regulation for every configuration determines the one that achieves the fulfillment of the raised aims. The algorithm is tested in a system of 33 nodes and 37 sections of lineImplementación de un método de búsqueda exhaustiva para la reconfiguración de sistemas de distribución de energía eléctricaDistribution Systems, Network Reconfiguration, Exhaustive Search, Loss Reduction, Radial Operation, Power Flows.Tesis/Trabajo de grado - Monografía - Pregradohttp://purl.org/coar/resource_type/c_7a1fhttp://purl.org/coar/version/c_b1a7d7d4d402bcceORIGINALCarta de autorización.pdfapplication/pdf230051https://noesis.uis.edu.co/bitstreams/48daa053-a1cf-40cf-af41-938ee40994a1/download58727742cd550ff5db5ca209477d4fb6MD51Documento.pdfapplication/pdf1609006https://noesis.uis.edu.co/bitstreams/68373994-58a7-4823-899e-e384319975c6/download3c949fa401bca61cee09ed6aa717ab71MD52Nota de proyecto.pdfapplication/pdf52012https://noesis.uis.edu.co/bitstreams/f38f404a-9c73-442b-849c-3ba9489cbdad/download69bc3608e5ce850a0c119ec4f283a5afMD5320.500.14071/35266oai:noesis.uis.edu.co:20.500.14071/352662024-03-03 17:46:50.086http://creativecommons.org/licenses/by-nc/4.0http://creativecommons.org/licenses/by/4.0/open.accesshttps://noesis.uis.edu.coDSpace at UISnoesis@uis.edu.co |