análisis estructural mediante la conversión tiempo-profundidad en un bloque de la cuenca llanos orientales, a partir de un cubo sísmico e información de pozos

El área de interés para este proyecto se encuentra en la parte noreste de Colombia en la Cuenca de los Llanos Orientales en el dominio estructural Meta. Este proyecto tiene como fin validar las principales trampas estructurales a partir de las superficies convertidas a profundidad y analizar las est...

Full description

Autores:
Rueda Ortiz, Keydy Yulieth
Tipo de recurso:
http://purl.org/coar/version/c_b1a7d7d4d402bcce
Fecha de publicación:
2016
Institución:
Universidad Industrial de Santander
Repositorio:
Repositorio UIS
Idioma:
spa
OAI Identifier:
oai:noesis.uis.edu.co:20.500.14071/35016
Acceso en línea:
https://noesis.uis.edu.co/handle/20.500.14071/35016
https://noesis.uis.edu.co
Palabra clave:
Modelo
Trampa
Sísmica
Pozo
Cubo
Estructural
Hidrocarburos
Velocidad
Ondas
Fallas
Horizontes.
The area of interest for this project is located in northeastern Colombia
Llanos Orientales basin
corresponding to structural domain of the Meta. This project seeks to validate the main structural traps from areas converted to depth
in addition to analyzing the structures and behavior of these through a 3D structural model. From the methodology applied time-depth conversion
which involved the borehole seismic calibration was performed through the generation of synthetic seismogram. The seismic interpretation was conducted at 3 horizons
two for the Cretaceous
corresponding to the geological formation Guadalupe Mass and K1 Superior
Geological formation Guadalupe Superior operational unit K2 and one for the Paleogene T2 belonging to the Geological formation San Fernando
along with the interpretation the main fault and satellites with the help of seismic attributes in time
modeled later. In addition
the generation of a calibrated velocity model from seismic velocity and well for the study area. Finally
as a contribution to this research project three structural maps corresponding to the tops of the aforementioned units
a structural 3D model in depth consistent with a structural analysis which is waiting to be of great help for future studies were generated. It comes with a better tool for making decisions about future wells that will be drilled in the field.
Rights
License
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
id UISANTADR2_c473717a82515c758b5a53283a386344
oai_identifier_str oai:noesis.uis.edu.co:20.500.14071/35016
network_acronym_str UISANTADR2
network_name_str Repositorio UIS
repository_id_str
dc.title.none.fl_str_mv análisis estructural mediante la conversión tiempo-profundidad en un bloque de la cuenca llanos orientales, a partir de un cubo sísmico e información de pozos
dc.title.english.none.fl_str_mv Model, Trap, Seismic, Well, Bucket, Structural, Oil, Speed, Waves, Faults, Horizons.
title análisis estructural mediante la conversión tiempo-profundidad en un bloque de la cuenca llanos orientales, a partir de un cubo sísmico e información de pozos
spellingShingle análisis estructural mediante la conversión tiempo-profundidad en un bloque de la cuenca llanos orientales, a partir de un cubo sísmico e información de pozos
Modelo
Trampa
Sísmica
Pozo
Cubo
Estructural
Hidrocarburos
Velocidad
Ondas
Fallas
Horizontes.
The area of interest for this project is located in northeastern Colombia
Llanos Orientales basin
corresponding to structural domain of the Meta. This project seeks to validate the main structural traps from areas converted to depth
in addition to analyzing the structures and behavior of these through a 3D structural model. From the methodology applied time-depth conversion
which involved the borehole seismic calibration was performed through the generation of synthetic seismogram. The seismic interpretation was conducted at 3 horizons
two for the Cretaceous
corresponding to the geological formation Guadalupe Mass and K1 Superior
Geological formation Guadalupe Superior operational unit K2 and one for the Paleogene T2 belonging to the Geological formation San Fernando
along with the interpretation the main fault and satellites with the help of seismic attributes in time
modeled later. In addition
the generation of a calibrated velocity model from seismic velocity and well for the study area. Finally
as a contribution to this research project three structural maps corresponding to the tops of the aforementioned units
a structural 3D model in depth consistent with a structural analysis which is waiting to be of great help for future studies were generated. It comes with a better tool for making decisions about future wells that will be drilled in the field.
title_short análisis estructural mediante la conversión tiempo-profundidad en un bloque de la cuenca llanos orientales, a partir de un cubo sísmico e información de pozos
title_full análisis estructural mediante la conversión tiempo-profundidad en un bloque de la cuenca llanos orientales, a partir de un cubo sísmico e información de pozos
title_fullStr análisis estructural mediante la conversión tiempo-profundidad en un bloque de la cuenca llanos orientales, a partir de un cubo sísmico e información de pozos
title_full_unstemmed análisis estructural mediante la conversión tiempo-profundidad en un bloque de la cuenca llanos orientales, a partir de un cubo sísmico e información de pozos
title_sort análisis estructural mediante la conversión tiempo-profundidad en un bloque de la cuenca llanos orientales, a partir de un cubo sísmico e información de pozos
dc.creator.fl_str_mv Rueda Ortiz, Keydy Yulieth
dc.contributor.advisor.none.fl_str_mv Mier Umaña, Ricardo
Illidge Araujo, Erik Johan
Chain Ortiz, Patricia
dc.contributor.author.none.fl_str_mv Rueda Ortiz, Keydy Yulieth
dc.subject.none.fl_str_mv Modelo
Trampa
Sísmica
Pozo
Cubo
Estructural
Hidrocarburos
Velocidad
Ondas
Fallas
Horizontes.
topic Modelo
Trampa
Sísmica
Pozo
Cubo
Estructural
Hidrocarburos
Velocidad
Ondas
Fallas
Horizontes.
The area of interest for this project is located in northeastern Colombia
Llanos Orientales basin
corresponding to structural domain of the Meta. This project seeks to validate the main structural traps from areas converted to depth
in addition to analyzing the structures and behavior of these through a 3D structural model. From the methodology applied time-depth conversion
which involved the borehole seismic calibration was performed through the generation of synthetic seismogram. The seismic interpretation was conducted at 3 horizons
two for the Cretaceous
corresponding to the geological formation Guadalupe Mass and K1 Superior
Geological formation Guadalupe Superior operational unit K2 and one for the Paleogene T2 belonging to the Geological formation San Fernando
along with the interpretation the main fault and satellites with the help of seismic attributes in time
modeled later. In addition
the generation of a calibrated velocity model from seismic velocity and well for the study area. Finally
as a contribution to this research project three structural maps corresponding to the tops of the aforementioned units
a structural 3D model in depth consistent with a structural analysis which is waiting to be of great help for future studies were generated. It comes with a better tool for making decisions about future wells that will be drilled in the field.
dc.subject.keyword.none.fl_str_mv The area of interest for this project is located in northeastern Colombia
Llanos Orientales basin
corresponding to structural domain of the Meta. This project seeks to validate the main structural traps from areas converted to depth
in addition to analyzing the structures and behavior of these through a 3D structural model. From the methodology applied time-depth conversion
which involved the borehole seismic calibration was performed through the generation of synthetic seismogram. The seismic interpretation was conducted at 3 horizons
two for the Cretaceous
corresponding to the geological formation Guadalupe Mass and K1 Superior
Geological formation Guadalupe Superior operational unit K2 and one for the Paleogene T2 belonging to the Geological formation San Fernando
along with the interpretation the main fault and satellites with the help of seismic attributes in time
modeled later. In addition
the generation of a calibrated velocity model from seismic velocity and well for the study area. Finally
as a contribution to this research project three structural maps corresponding to the tops of the aforementioned units
a structural 3D model in depth consistent with a structural analysis which is waiting to be of great help for future studies were generated. It comes with a better tool for making decisions about future wells that will be drilled in the field.
description El área de interés para este proyecto se encuentra en la parte noreste de Colombia en la Cuenca de los Llanos Orientales en el dominio estructural Meta. Este proyecto tiene como fin validar las principales trampas estructurales a partir de las superficies convertidas a profundidad y analizar las estructuras y el comportamiento de éstas a través del modelo estructural 3D. A través de la metodología aplicada se realizó la conversión tiempo-profundidad, donde implico la calibración sísmica pozo, a través de la generación del sismograma sintético. La interpretación sísmica fue realizada a 3 horizontes, dos para el Cretácico, unidad operacional K2 correspondiente a la Formación Guadalupe Masivo y K1 Superior Formación Guadalupe Superior y uno para el Paleógeno T2 perteneciente a la Formación San Fernando, así también la interpretación de la falla principal y satélites con la ayuda de atributos sísmicos en tiempo. Donde posteriormente fueron modelados. Además, la generación de un modelo de velocidades robustos calibrado a partir de la velocidad sísmica y de pozo para la zona de estudio. Finalmente, como contribución a este estudio se generaron 3 mapas estructurales correspondientes a las unidades anteriormente mencionadas, además un modelo estructural 3D en profundidad consistente y congruente con el cual se hace un análisis de la estructura el cual será de gran ayuda para próximos estudios. Suministrando una mejor herramienta para la toma de decisiones acerca de los futuros pozos que posiblemente se vayan a perforar dentro del campo.
publishDate 2016
dc.date.available.none.fl_str_mv 2016
2024-03-03T22:43:55Z
dc.date.created.none.fl_str_mv 2016
dc.date.issued.none.fl_str_mv 2016
dc.date.accessioned.none.fl_str_mv 2024-03-03T22:43:55Z
dc.type.local.none.fl_str_mv Tesis/Trabajo de grado - Monografía - Pregrado
dc.type.hasversion.none.fl_str_mv http://purl.org/coar/resource_type/c_7a1f
dc.type.coar.none.fl_str_mv http://purl.org/coar/version/c_b1a7d7d4d402bcce
format http://purl.org/coar/version/c_b1a7d7d4d402bcce
dc.identifier.uri.none.fl_str_mv https://noesis.uis.edu.co/handle/20.500.14071/35016
dc.identifier.instname.none.fl_str_mv Universidad Industrial de Santander
dc.identifier.reponame.none.fl_str_mv Universidad Industrial de Santander
dc.identifier.repourl.none.fl_str_mv https://noesis.uis.edu.co
url https://noesis.uis.edu.co/handle/20.500.14071/35016
https://noesis.uis.edu.co
identifier_str_mv Universidad Industrial de Santander
dc.language.iso.none.fl_str_mv spa
language spa
dc.rights.none.fl_str_mv http://creativecommons.org/licenses/by/4.0/
dc.rights.coar.fl_str_mv http://purl.org/coar/access_right/c_abf2
dc.rights.license.none.fl_str_mv Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
dc.rights.uri.none.fl_str_mv http://creativecommons.org/licenses/by-nc/4.0
dc.rights.creativecommons.none.fl_str_mv Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
rights_invalid_str_mv Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
http://creativecommons.org/licenses/by/4.0/
http://creativecommons.org/licenses/by-nc/4.0
Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
http://purl.org/coar/access_right/c_abf2
dc.format.mimetype.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidad Industrial de Santander
dc.publisher.faculty.none.fl_str_mv Facultad de Ingenierías Fisicoquímicas
dc.publisher.program.none.fl_str_mv Geología
dc.publisher.school.none.fl_str_mv Escuela de Geología
publisher.none.fl_str_mv Universidad Industrial de Santander
institution Universidad Industrial de Santander
bitstream.url.fl_str_mv https://noesis.uis.edu.co/bitstreams/c3b685c8-acd3-44a8-bd21-47f411c63bf2/download
https://noesis.uis.edu.co/bitstreams/cc8e2de5-b237-4a22-a229-e572064aff2d/download
https://noesis.uis.edu.co/bitstreams/34bfc119-6be6-4911-af83-14802439b671/download
bitstream.checksum.fl_str_mv 414c84188bd0e1797b09014f11a898f8
d1e23d06f1d44909eecfaf746e0a6702
c6c99ab77c793a97a49ea70fc11397b7
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
MD5
repository.name.fl_str_mv DSpace at UIS
repository.mail.fl_str_mv noesis@uis.edu.co
_version_ 1812187048058028032
spelling Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)http://creativecommons.org/licenses/by/4.0/http://creativecommons.org/licenses/by-nc/4.0Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)http://purl.org/coar/access_right/c_abf2Mier Umaña, RicardoIllidge Araujo, Erik JohanChain Ortiz, PatriciaRueda Ortiz, Keydy Yulieth2024-03-03T22:43:55Z20162024-03-03T22:43:55Z20162016https://noesis.uis.edu.co/handle/20.500.14071/35016Universidad Industrial de SantanderUniversidad Industrial de Santanderhttps://noesis.uis.edu.coEl área de interés para este proyecto se encuentra en la parte noreste de Colombia en la Cuenca de los Llanos Orientales en el dominio estructural Meta. Este proyecto tiene como fin validar las principales trampas estructurales a partir de las superficies convertidas a profundidad y analizar las estructuras y el comportamiento de éstas a través del modelo estructural 3D. A través de la metodología aplicada se realizó la conversión tiempo-profundidad, donde implico la calibración sísmica pozo, a través de la generación del sismograma sintético. La interpretación sísmica fue realizada a 3 horizontes, dos para el Cretácico, unidad operacional K2 correspondiente a la Formación Guadalupe Masivo y K1 Superior Formación Guadalupe Superior y uno para el Paleógeno T2 perteneciente a la Formación San Fernando, así también la interpretación de la falla principal y satélites con la ayuda de atributos sísmicos en tiempo. Donde posteriormente fueron modelados. Además, la generación de un modelo de velocidades robustos calibrado a partir de la velocidad sísmica y de pozo para la zona de estudio. Finalmente, como contribución a este estudio se generaron 3 mapas estructurales correspondientes a las unidades anteriormente mencionadas, además un modelo estructural 3D en profundidad consistente y congruente con el cual se hace un análisis de la estructura el cual será de gran ayuda para próximos estudios. Suministrando una mejor herramienta para la toma de decisiones acerca de los futuros pozos que posiblemente se vayan a perforar dentro del campo.PregradoGeólogoStructural analysis by conversion time depth in a block of basin eastern plains, from a seismic bucket and information of wellsapplication/pdfspaUniversidad Industrial de SantanderFacultad de Ingenierías FisicoquímicasGeologíaEscuela de GeologíaModeloTrampaSísmicaPozoCuboEstructuralHidrocarburosVelocidadOndasFallasHorizontes.The area of interest for this project is located in northeastern ColombiaLlanos Orientales basincorresponding to structural domain of the Meta. This project seeks to validate the main structural traps from areas converted to depthin addition to analyzing the structures and behavior of these through a 3D structural model. From the methodology applied time-depth conversionwhich involved the borehole seismic calibration was performed through the generation of synthetic seismogram. The seismic interpretation was conducted at 3 horizonstwo for the Cretaceouscorresponding to the geological formation Guadalupe Mass and K1 SuperiorGeological formation Guadalupe Superior operational unit K2 and one for the Paleogene T2 belonging to the Geological formation San Fernandoalong with the interpretation the main fault and satellites with the help of seismic attributes in timemodeled later. In additionthe generation of a calibrated velocity model from seismic velocity and well for the study area. Finallyas a contribution to this research project three structural maps corresponding to the tops of the aforementioned unitsa structural 3D model in depth consistent with a structural analysis which is waiting to be of great help for future studies were generated. It comes with a better tool for making decisions about future wells that will be drilled in the field.análisis estructural mediante la conversión tiempo-profundidad en un bloque de la cuenca llanos orientales, a partir de un cubo sísmico e información de pozosModel, Trap, Seismic, Well, Bucket, Structural, Oil, Speed, Waves, Faults, Horizons.Tesis/Trabajo de grado - Monografía - Pregradohttp://purl.org/coar/resource_type/c_7a1fhttp://purl.org/coar/version/c_b1a7d7d4d402bcceORIGINALCarta de autorización.pdfapplication/pdf266515https://noesis.uis.edu.co/bitstreams/c3b685c8-acd3-44a8-bd21-47f411c63bf2/download414c84188bd0e1797b09014f11a898f8MD51Documento.pdfapplication/pdf8055312https://noesis.uis.edu.co/bitstreams/cc8e2de5-b237-4a22-a229-e572064aff2d/downloadd1e23d06f1d44909eecfaf746e0a6702MD52Nota de proyecto.pdfapplication/pdf112926https://noesis.uis.edu.co/bitstreams/34bfc119-6be6-4911-af83-14802439b671/downloadc6c99ab77c793a97a49ea70fc11397b7MD5320.500.14071/35016oai:noesis.uis.edu.co:20.500.14071/350162024-03-03 17:43:55.169http://creativecommons.org/licenses/by-nc/4.0http://creativecommons.org/licenses/by/4.0/open.accesshttps://noesis.uis.edu.coDSpace at UISnoesis@uis.edu.co