Herramienta computacional para el análisis de la iluminación y climatización automatizada de espacios específicos del edificio de ingeniería eléctrica
El presente trabajo de grado consiste en la realización de una herramienta computacional que muestre y simule el funcionamiento de los sistemas automatizados de iluminación y climatización híbrida (natural y mecánica) implementados en espacios específicos del Edificio de Ingeniería Eléc-trica de la...
- Autores:
-
Suarez Suarez, Andres Eduardo
Acevedo Celis, Leidy Carolina
Benitez Cordero, Julian Rene
- Tipo de recurso:
- http://purl.org/coar/version/c_b1a7d7d4d402bcce
- Fecha de publicación:
- 2016
- Institución:
- Universidad Industrial de Santander
- Repositorio:
- Repositorio UIS
- Idioma:
- spa
- OAI Identifier:
- oai:noesis.uis.edu.co:20.500.14071/35294
- Palabra clave:
- Automatización
Edificaciones Verdes
Simulación Energética
Uso Racional Y Efi-Ciente De La Energía
Aplicativo Computacional
This document consist in the making of a computational tool that shows and simulates the function-ing of hybrid HVAC (natural and mechanical) and illumination systems implemented in specific parts of the Electrical Engineering Building of UIS. The main use of this tool is to describe the behavior of the automatized HVAC and illumination systems
to teach the users about the functioning of itself
based on green design criteria
like a strategy to be able to take benefit in all the natural resources and saving energy. This computational tool gives the user information about the automatized HVAC and illumination systems of the E3T building
with an interface that supplies data and consumption and energy sav-ing graphics. The bigger part of this tool is made in the software Excel VBA because this software is licensed and its interface is user friendly. The data and solar radiation graphics showed in the simu-lator were made with the free-ware SOLEA-2. The functioning of each illumination and HVAC subsystem is viewed through the manipulation of controls that can be chosen according the function the user needs to observe. The tool provides graphic and numeric information for each sub-system chosen
allowing the user (in an interactive way) to visualize the monitored and automatized system information in the E3T building. This document contains important information about subjects like green buildings
rational use of energy
functioning
composition and simulation of automatized HVAC and illumination systems
using the concept of State Machines. 5
- Rights
- License
- Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
id |
UISANTADR2_0904adad301daafa0a440d9bb0dcb067 |
---|---|
oai_identifier_str |
oai:noesis.uis.edu.co:20.500.14071/35294 |
network_acronym_str |
UISANTADR2 |
network_name_str |
Repositorio UIS |
repository_id_str |
|
dc.title.none.fl_str_mv |
Herramienta computacional para el análisis de la iluminación y climatización automatizada de espacios específicos del edificio de ingeniería eléctrica |
dc.title.english.none.fl_str_mv |
Automation, Green Buildings, Energy Simulation, Rational And Efficient Use Of Energy, Computer Application. |
title |
Herramienta computacional para el análisis de la iluminación y climatización automatizada de espacios específicos del edificio de ingeniería eléctrica |
spellingShingle |
Herramienta computacional para el análisis de la iluminación y climatización automatizada de espacios específicos del edificio de ingeniería eléctrica Automatización Edificaciones Verdes Simulación Energética Uso Racional Y Efi-Ciente De La Energía Aplicativo Computacional This document consist in the making of a computational tool that shows and simulates the function-ing of hybrid HVAC (natural and mechanical) and illumination systems implemented in specific parts of the Electrical Engineering Building of UIS. The main use of this tool is to describe the behavior of the automatized HVAC and illumination systems to teach the users about the functioning of itself based on green design criteria like a strategy to be able to take benefit in all the natural resources and saving energy. This computational tool gives the user information about the automatized HVAC and illumination systems of the E3T building with an interface that supplies data and consumption and energy sav-ing graphics. The bigger part of this tool is made in the software Excel VBA because this software is licensed and its interface is user friendly. The data and solar radiation graphics showed in the simu-lator were made with the free-ware SOLEA-2. The functioning of each illumination and HVAC subsystem is viewed through the manipulation of controls that can be chosen according the function the user needs to observe. The tool provides graphic and numeric information for each sub-system chosen allowing the user (in an interactive way) to visualize the monitored and automatized system information in the E3T building. This document contains important information about subjects like green buildings rational use of energy functioning composition and simulation of automatized HVAC and illumination systems using the concept of State Machines. 5 |
title_short |
Herramienta computacional para el análisis de la iluminación y climatización automatizada de espacios específicos del edificio de ingeniería eléctrica |
title_full |
Herramienta computacional para el análisis de la iluminación y climatización automatizada de espacios específicos del edificio de ingeniería eléctrica |
title_fullStr |
Herramienta computacional para el análisis de la iluminación y climatización automatizada de espacios específicos del edificio de ingeniería eléctrica |
title_full_unstemmed |
Herramienta computacional para el análisis de la iluminación y climatización automatizada de espacios específicos del edificio de ingeniería eléctrica |
title_sort |
Herramienta computacional para el análisis de la iluminación y climatización automatizada de espacios específicos del edificio de ingeniería eléctrica |
dc.creator.fl_str_mv |
Suarez Suarez, Andres Eduardo Acevedo Celis, Leidy Carolina Benitez Cordero, Julian Rene |
dc.contributor.advisor.none.fl_str_mv |
Osma Pinto, German Alfonso Ordóñez Plata, Gabriel Amado Duarte, Laura Yazmin |
dc.contributor.author.none.fl_str_mv |
Suarez Suarez, Andres Eduardo Acevedo Celis, Leidy Carolina Benitez Cordero, Julian Rene |
dc.subject.none.fl_str_mv |
Automatización Edificaciones Verdes Simulación Energética Uso Racional Y Efi-Ciente De La Energía Aplicativo Computacional |
topic |
Automatización Edificaciones Verdes Simulación Energética Uso Racional Y Efi-Ciente De La Energía Aplicativo Computacional This document consist in the making of a computational tool that shows and simulates the function-ing of hybrid HVAC (natural and mechanical) and illumination systems implemented in specific parts of the Electrical Engineering Building of UIS. The main use of this tool is to describe the behavior of the automatized HVAC and illumination systems to teach the users about the functioning of itself based on green design criteria like a strategy to be able to take benefit in all the natural resources and saving energy. This computational tool gives the user information about the automatized HVAC and illumination systems of the E3T building with an interface that supplies data and consumption and energy sav-ing graphics. The bigger part of this tool is made in the software Excel VBA because this software is licensed and its interface is user friendly. The data and solar radiation graphics showed in the simu-lator were made with the free-ware SOLEA-2. The functioning of each illumination and HVAC subsystem is viewed through the manipulation of controls that can be chosen according the function the user needs to observe. The tool provides graphic and numeric information for each sub-system chosen allowing the user (in an interactive way) to visualize the monitored and automatized system information in the E3T building. This document contains important information about subjects like green buildings rational use of energy functioning composition and simulation of automatized HVAC and illumination systems using the concept of State Machines. 5 |
dc.subject.keyword.none.fl_str_mv |
This document consist in the making of a computational tool that shows and simulates the function-ing of hybrid HVAC (natural and mechanical) and illumination systems implemented in specific parts of the Electrical Engineering Building of UIS. The main use of this tool is to describe the behavior of the automatized HVAC and illumination systems to teach the users about the functioning of itself based on green design criteria like a strategy to be able to take benefit in all the natural resources and saving energy. This computational tool gives the user information about the automatized HVAC and illumination systems of the E3T building with an interface that supplies data and consumption and energy sav-ing graphics. The bigger part of this tool is made in the software Excel VBA because this software is licensed and its interface is user friendly. The data and solar radiation graphics showed in the simu-lator were made with the free-ware SOLEA-2. The functioning of each illumination and HVAC subsystem is viewed through the manipulation of controls that can be chosen according the function the user needs to observe. The tool provides graphic and numeric information for each sub-system chosen allowing the user (in an interactive way) to visualize the monitored and automatized system information in the E3T building. This document contains important information about subjects like green buildings rational use of energy functioning composition and simulation of automatized HVAC and illumination systems using the concept of State Machines. 5 |
description |
El presente trabajo de grado consiste en la realización de una herramienta computacional que muestre y simule el funcionamiento de los sistemas automatizados de iluminación y climatización híbrida (natural y mecánica) implementados en espacios específicos del Edificio de Ingeniería Eléc-trica de la Universidad Industrial de Santander. La finalidad de esta herramienta es describir el comportamiento de los sistemas automatizados de iluminación y climatización del edificio de la E3T-UIS3, para entrenar a los usuarios sobre el funcionamiento del mismo, basados en el criterio de diseño verde, como una estrategia de aprovechamiento de los recursos naturales y ahorro energético. La herramienta computacional realizada proporciona al usuario información de los sistemas auto-matizados de iluminación y climatización del Edificio de la E3T-UIS, mediante una interfaz que suministra datos y curvas de consumo y ahorro energético. La mayor parte de la herramienta se realiza en el software VBA Excel debido a que la Universidad posee la licencia de este software y se facilita su difusión en la comunidad universitaria. Las gráficas y datos de radiación solar que se muestran en el simulador de la interfaz, se realizaron con el software gratuito SOLEA-24. El funcionamiento de cada subsistema de iluminación y climatización se visualiza mediante la ma-nipulación de controles que se pueden seleccionar según la función que se desee observar. La herramienta proporciona información de forma gráfica y numérica para cada subsistema seleccio-nado, permitiendo al usuario, de forma interactiva, visualizar la información de los sistemas monito-reados y automatizados en el edificio de ingeniería eléctrica. Este libro contiene información introductoria a temas como: edificaciones verdes, uso racional de la energía (URE), funcionamiento, composición y simulación de sistemas automatizados de ilumina-ción y climatización, utilizando el concepto de máquina de estados. 1 |
publishDate |
2016 |
dc.date.available.none.fl_str_mv |
2016 2024-03-03T22:47:14Z |
dc.date.created.none.fl_str_mv |
2016 |
dc.date.issued.none.fl_str_mv |
2016 |
dc.date.accessioned.none.fl_str_mv |
2024-03-03T22:47:14Z |
dc.type.local.none.fl_str_mv |
Tesis/Trabajo de grado - Monografía - Pregrado |
dc.type.hasversion.none.fl_str_mv |
http://purl.org/coar/resource_type/c_7a1f |
dc.type.coar.none.fl_str_mv |
http://purl.org/coar/version/c_b1a7d7d4d402bcce |
format |
http://purl.org/coar/version/c_b1a7d7d4d402bcce |
dc.identifier.uri.none.fl_str_mv |
https://noesis.uis.edu.co/handle/20.500.14071/35294 |
dc.identifier.instname.none.fl_str_mv |
Universidad Industrial de Santander |
dc.identifier.reponame.none.fl_str_mv |
Universidad Industrial de Santander |
dc.identifier.repourl.none.fl_str_mv |
https://noesis.uis.edu.co |
url |
https://noesis.uis.edu.co/handle/20.500.14071/35294 https://noesis.uis.edu.co |
identifier_str_mv |
Universidad Industrial de Santander |
dc.language.iso.none.fl_str_mv |
spa |
language |
spa |
dc.rights.none.fl_str_mv |
http://creativecommons.org/licenses/by/4.0/ |
dc.rights.coar.fl_str_mv |
http://purl.org/coar/access_right/c_abf2 |
dc.rights.license.none.fl_str_mv |
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) |
dc.rights.uri.none.fl_str_mv |
http://creativecommons.org/licenses/by-nc/4.0 |
dc.rights.creativecommons.none.fl_str_mv |
Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) |
rights_invalid_str_mv |
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) http://creativecommons.org/licenses/by/4.0/ http://creativecommons.org/licenses/by-nc/4.0 Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) http://purl.org/coar/access_right/c_abf2 |
dc.format.mimetype.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidad Industrial de Santander |
dc.publisher.faculty.none.fl_str_mv |
Facultad de Ingenierías Fisicomecánicas |
dc.publisher.program.none.fl_str_mv |
Ingeniería Eléctrica |
dc.publisher.school.none.fl_str_mv |
Escuela de Ingenierías Eléctrica, Electrónica y Telecomunicaciones |
publisher.none.fl_str_mv |
Universidad Industrial de Santander |
institution |
Universidad Industrial de Santander |
bitstream.url.fl_str_mv |
https://noesis.uis.edu.co/bitstreams/2e537ad6-cec9-4901-9337-eb1647cca855/download https://noesis.uis.edu.co/bitstreams/dbb1f507-8ca1-4dec-976a-58db34959e69/download https://noesis.uis.edu.co/bitstreams/a4f2846f-7813-4d6f-be78-b7a62eff0a15/download |
bitstream.checksum.fl_str_mv |
ea9998fc7fa2b0680dc3d44804d04bc4 c857624deb77b0a4e87892d14df1bae6 60e106864a47d3eeeeff8e275a2eeaa0 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
DSpace at UIS |
repository.mail.fl_str_mv |
noesis@uis.edu.co |
_version_ |
1831929746447925248 |
spelling |
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)http://creativecommons.org/licenses/by/4.0/http://creativecommons.org/licenses/by-nc/4.0Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)http://purl.org/coar/access_right/c_abf2Osma Pinto, German AlfonsoOrdóñez Plata, GabrielAmado Duarte, Laura YazminSuarez Suarez, Andres EduardoAcevedo Celis, Leidy CarolinaBenitez Cordero, Julian Rene2024-03-03T22:47:14Z20162024-03-03T22:47:14Z20162016https://noesis.uis.edu.co/handle/20.500.14071/35294Universidad Industrial de SantanderUniversidad Industrial de Santanderhttps://noesis.uis.edu.coEl presente trabajo de grado consiste en la realización de una herramienta computacional que muestre y simule el funcionamiento de los sistemas automatizados de iluminación y climatización híbrida (natural y mecánica) implementados en espacios específicos del Edificio de Ingeniería Eléc-trica de la Universidad Industrial de Santander. La finalidad de esta herramienta es describir el comportamiento de los sistemas automatizados de iluminación y climatización del edificio de la E3T-UIS3, para entrenar a los usuarios sobre el funcionamiento del mismo, basados en el criterio de diseño verde, como una estrategia de aprovechamiento de los recursos naturales y ahorro energético. La herramienta computacional realizada proporciona al usuario información de los sistemas auto-matizados de iluminación y climatización del Edificio de la E3T-UIS, mediante una interfaz que suministra datos y curvas de consumo y ahorro energético. La mayor parte de la herramienta se realiza en el software VBA Excel debido a que la Universidad posee la licencia de este software y se facilita su difusión en la comunidad universitaria. Las gráficas y datos de radiación solar que se muestran en el simulador de la interfaz, se realizaron con el software gratuito SOLEA-24. El funcionamiento de cada subsistema de iluminación y climatización se visualiza mediante la ma-nipulación de controles que se pueden seleccionar según la función que se desee observar. La herramienta proporciona información de forma gráfica y numérica para cada subsistema seleccio-nado, permitiendo al usuario, de forma interactiva, visualizar la información de los sistemas monito-reados y automatizados en el edificio de ingeniería eléctrica. Este libro contiene información introductoria a temas como: edificaciones verdes, uso racional de la energía (URE), funcionamiento, composición y simulación de sistemas automatizados de ilumina-ción y climatización, utilizando el concepto de máquina de estados. 1PregradoIngeniero ElectricistaComputer tool for automated climate and lighting analysis of specific areas of the electrical engineering building5.application/pdfspaUniversidad Industrial de SantanderFacultad de Ingenierías FisicomecánicasIngeniería EléctricaEscuela de Ingenierías Eléctrica, Electrónica y TelecomunicacionesAutomatizaciónEdificaciones VerdesSimulación EnergéticaUso Racional Y Efi-Ciente De La EnergíaAplicativo ComputacionalThis document consist in the making of a computational tool that shows and simulates the function-ing of hybrid HVAC (natural and mechanical) and illumination systems implemented in specific parts of the Electrical Engineering Building of UIS. The main use of this tool is to describe the behavior of the automatized HVAC and illumination systemsto teach the users about the functioning of itselfbased on green design criterialike a strategy to be able to take benefit in all the natural resources and saving energy. This computational tool gives the user information about the automatized HVAC and illumination systems of the E3T buildingwith an interface that supplies data and consumption and energy sav-ing graphics. The bigger part of this tool is made in the software Excel VBA because this software is licensed and its interface is user friendly. The data and solar radiation graphics showed in the simu-lator were made with the free-ware SOLEA-2. The functioning of each illumination and HVAC subsystem is viewed through the manipulation of controls that can be chosen according the function the user needs to observe. The tool provides graphic and numeric information for each sub-system chosenallowing the user (in an interactive way) to visualize the monitored and automatized system information in the E3T building. This document contains important information about subjects like green buildingsrational use of energyfunctioningcomposition and simulation of automatized HVAC and illumination systemsusing the concept of State Machines. 5Herramienta computacional para el análisis de la iluminación y climatización automatizada de espacios específicos del edificio de ingeniería eléctricaAutomation, Green Buildings, Energy Simulation, Rational And Efficient Use Of Energy, Computer Application.Tesis/Trabajo de grado - Monografía - Pregradohttp://purl.org/coar/resource_type/c_7a1fhttp://purl.org/coar/version/c_b1a7d7d4d402bcceORIGINALCarta de autorización.pdfapplication/pdf356841https://noesis.uis.edu.co/bitstreams/2e537ad6-cec9-4901-9337-eb1647cca855/downloadea9998fc7fa2b0680dc3d44804d04bc4MD51Documento.pdfapplication/pdf13726014https://noesis.uis.edu.co/bitstreams/dbb1f507-8ca1-4dec-976a-58db34959e69/downloadc857624deb77b0a4e87892d14df1bae6MD52Nota de proyecto.pdfapplication/pdf62831https://noesis.uis.edu.co/bitstreams/a4f2846f-7813-4d6f-be78-b7a62eff0a15/download60e106864a47d3eeeeff8e275a2eeaa0MD5320.500.14071/35294oai:noesis.uis.edu.co:20.500.14071/352942024-03-03 17:47:14.16http://creativecommons.org/licenses/by-nc/4.0http://creativecommons.org/licenses/by/4.0/open.accesshttps://noesis.uis.edu.coDSpace at UISnoesis@uis.edu.co |