Multiple Traces of Families of Epoxy Derivatives as New Inhibitors of the Industrial Polymerization Reaction of Propylene
In this study, the impact of ethylene oxide, propylene oxide, 1,2-butene oxide, and 1,2- pentene oxide on the polymerization of propylene at an industrial level was investigated, focusing on their influence on the catalytic efficiency and the properties of polypropylene (PP) without additives. The r...
- Autores:
-
Hernandez Fernandez, Joaquin
Ortega-Toro, Rodrigo
Castro-Suarez, John R.
- Tipo de recurso:
- Fecha de publicación:
- 2024
- Institución:
- Universidad Tecnológica de Bolívar
- Repositorio:
- Repositorio Institucional UTB
- Idioma:
- eng
- OAI Identifier:
- oai:repositorio.utb.edu.co:20.500.12585/12710
- Acceso en línea:
- https://hdl.handle.net/20.500.12585/12710
- Palabra clave:
- Polypropylene
Catalytic efficiency
Ziegler–Natta system
Inhibitors
Impurities
Polymerization
Epoxides
- Rights
- openAccess
- License
- http://creativecommons.org/publicdomain/zero/1.0/
| Summary: | In this study, the impact of ethylene oxide, propylene oxide, 1,2-butene oxide, and 1,2- pentene oxide on the polymerization of propylene at an industrial level was investigated, focusing on their influence on the catalytic efficiency and the properties of polypropylene (PP) without additives. The results show that concentrations between 0 and 1.24 ppm of these epoxides negatively affect the reaction’s productivity, the PP’s mechanical properties, the polymer’s fluidity index, and the PP’s thermal properties. Fourier transform infrared spectroscopy (FTIR) revealed bands for the Ti-O bond and the Cl-Ti-O-CH2 bonds at 430 to 475 cm−1 and 957 to 1037 cm−1, respectively, indicating the interaction between the epoxides and the Ziegler–Natta catalyst. The thermal degradation of PP in the presence of these epoxides showed a similar trend, varying in magnitude depending on the concentration of the inhibitor. Sample M7, with 0.021 ppm propylene oxide, exhibited significant mass loss at both 540 ◦C and 600 ◦C, suggesting that even small concentrations of this epoxide can markedly increase the thermal degradation of PP. This pattern is repeated in samples with 1,2-butene oxide and 1,2-pentene oxide. These results highlight the need to strictly control the presence of impurities in PP production to optimize both the final product’s quality and the polymerization process’s efficiency. |
|---|