Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Model
The purpose of this paper is to perform the analysis of literature review regarding the design of open architecture products (OAP) and their potential benefits within the circular economy (CE) model. The analysis involved studying more than 80 research articles during the last two decades in enginee...
- Autores:
- Tipo de recurso:
- Fecha de publicación:
- 2019
- Institución:
- Universidad Tecnológica de Bolívar
- Repositorio:
- Repositorio Institucional UTB
- Idioma:
- eng
- OAI Identifier:
- oai:repositorio.utb.edu.co:20.500.12585/9158
- Acceso en línea:
- https://hdl.handle.net/20.500.12585/9158
- Palabra clave:
- Circular economy
Open architecture products
Research opportunities
Sustainable design
Trends
Architecture
Computer architecture
Ecodesign
Emission control
Life cycle
Sustainable development
Circular economy
Manufacturing process
Open architecture
Research opportunities
Resource optimization
Sustainability performance
Sustainable product designs
Trends
Product design
- Rights
- restrictedAccess
- License
- http://creativecommons.org/licenses/by-nc-nd/4.0/
| id |
UTB2_08a6db4616e6762cc0c20b091523ad75 |
|---|---|
| oai_identifier_str |
oai:repositorio.utb.edu.co:20.500.12585/9158 |
| network_acronym_str |
UTB2 |
| network_name_str |
Repositorio Institucional UTB |
| repository_id_str |
|
| dc.title.none.fl_str_mv |
Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Model |
| title |
Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Model |
| spellingShingle |
Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Model Circular economy Open architecture products Research opportunities Sustainable design Trends Architecture Computer architecture Ecodesign Emission control Life cycle Sustainable development Circular economy Manufacturing process Open architecture Research opportunities Resource optimization Sustainability performance Sustainable product designs Trends Product design |
| title_short |
Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Model |
| title_full |
Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Model |
| title_fullStr |
Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Model |
| title_full_unstemmed |
Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Model |
| title_sort |
Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Model |
| dc.subject.keywords.none.fl_str_mv |
Circular economy Open architecture products Research opportunities Sustainable design Trends Architecture Computer architecture Ecodesign Emission control Life cycle Sustainable development Circular economy Manufacturing process Open architecture Research opportunities Resource optimization Sustainability performance Sustainable product designs Trends Product design |
| topic |
Circular economy Open architecture products Research opportunities Sustainable design Trends Architecture Computer architecture Ecodesign Emission control Life cycle Sustainable development Circular economy Manufacturing process Open architecture Research opportunities Resource optimization Sustainability performance Sustainable product designs Trends Product design |
| description |
The purpose of this paper is to perform the analysis of literature review regarding the design of open architecture products (OAP) and their potential benefits within the circular economy (CE) model. The analysis involved studying more than 80 research articles during the last two decades in engineering journals. The articles were gathered through a bibliometric analysis using the most relevant keywords concerning product design, sustainability, OAP, and CE. Main trends, challenges and future scopes of research opportunities and development were identified. The study provides a framework to designers and researchers involved in the design of OAP to enhance their sustainability performance for a CE model, which integrates lifecycle considerations (reuse, remanufacturing, repair, and recycle), resource optimization, and emissions reduction. The findings include the need for design methods focused on the design of OAP to guarantee an effective circularity of resources during the whole lifecycle of products and the need of integrating manufacturing processes and material analysis to design products capable of adapting to the CE model. © 2019, Korean Society for Precision Engineering. |
| publishDate |
2019 |
| dc.date.issued.none.fl_str_mv |
2019 |
| dc.date.accessioned.none.fl_str_mv |
2020-03-26T16:33:05Z |
| dc.date.available.none.fl_str_mv |
2020-03-26T16:33:05Z |
| dc.type.coarversion.fl_str_mv |
http://purl.org/coar/version/c_970fb48d4fbd8a85 |
| dc.type.coar.fl_str_mv |
http://purl.org/coar/resource_type/c_efa0 |
| dc.type.driver.none.fl_str_mv |
info:eu-repo/semantics/review |
| dc.type.hasVersion.none.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
| dc.type.spa.none.fl_str_mv |
Artículo de revisión |
| status_str |
publishedVersion |
| dc.identifier.citation.none.fl_str_mv |
International Journal of Precision Engineering and Manufacturing - Green Technology; Vol. 6, Núm. 2; pp. 377-391 |
| dc.identifier.issn.none.fl_str_mv |
22886206 |
| dc.identifier.uri.none.fl_str_mv |
https://hdl.handle.net/20.500.12585/9158 |
| dc.identifier.doi.none.fl_str_mv |
10.1007/s40684-019-00052-1 |
| dc.identifier.instname.none.fl_str_mv |
Universidad Tecnológica de Bolívar |
| dc.identifier.reponame.none.fl_str_mv |
Repositorio UTB |
| dc.identifier.orcid.none.fl_str_mv |
56079249600 6506807401 55281389200 |
| identifier_str_mv |
International Journal of Precision Engineering and Manufacturing - Green Technology; Vol. 6, Núm. 2; pp. 377-391 22886206 10.1007/s40684-019-00052-1 Universidad Tecnológica de Bolívar Repositorio UTB 56079249600 6506807401 55281389200 |
| url |
https://hdl.handle.net/20.500.12585/9158 |
| dc.language.iso.none.fl_str_mv |
eng |
| language |
eng |
| dc.rights.coar.fl_str_mv |
http://purl.org/coar/access_right/c_16ec |
| dc.rights.uri.none.fl_str_mv |
http://creativecommons.org/licenses/by-nc-nd/4.0/ |
| dc.rights.accessRights.none.fl_str_mv |
info:eu-repo/semantics/restrictedAccess |
| dc.rights.cc.none.fl_str_mv |
Atribución-NoComercial 4.0 Internacional |
| rights_invalid_str_mv |
http://creativecommons.org/licenses/by-nc-nd/4.0/ Atribución-NoComercial 4.0 Internacional http://purl.org/coar/access_right/c_16ec |
| eu_rights_str_mv |
restrictedAccess |
| dc.format.medium.none.fl_str_mv |
Recurso electrónico |
| dc.format.mimetype.none.fl_str_mv |
application/pdf |
| dc.publisher.none.fl_str_mv |
Korean Society for Precision Engineering |
| publisher.none.fl_str_mv |
Korean Society for Precision Engineering |
| dc.source.none.fl_str_mv |
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85063869699&doi=10.1007%2fs40684-019-00052-1&partnerID=40&md5=8ee8cc15c4d07ccb4ed6b74528ee85a9 |
| institution |
Universidad Tecnológica de Bolívar |
| bitstream.url.fl_str_mv |
https://repositorio.utb.edu.co/bitstream/20.500.12585/9158/1/MiniProdInv.png |
| bitstream.checksum.fl_str_mv |
0cb0f101a8d16897fb46fc914d3d7043 |
| bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
| repository.name.fl_str_mv |
Repositorio Institucional UTB |
| repository.mail.fl_str_mv |
repositorioutb@utb.edu.co |
| _version_ |
1814021549780369408 |
| spelling |
2020-03-26T16:33:05Z2020-03-26T16:33:05Z2019International Journal of Precision Engineering and Manufacturing - Green Technology; Vol. 6, Núm. 2; pp. 377-39122886206https://hdl.handle.net/20.500.12585/915810.1007/s40684-019-00052-1Universidad Tecnológica de BolívarRepositorio UTB56079249600650680740155281389200The purpose of this paper is to perform the analysis of literature review regarding the design of open architecture products (OAP) and their potential benefits within the circular economy (CE) model. The analysis involved studying more than 80 research articles during the last two decades in engineering journals. The articles were gathered through a bibliometric analysis using the most relevant keywords concerning product design, sustainability, OAP, and CE. Main trends, challenges and future scopes of research opportunities and development were identified. The study provides a framework to designers and researchers involved in the design of OAP to enhance their sustainability performance for a CE model, which integrates lifecycle considerations (reuse, remanufacturing, repair, and recycle), resource optimization, and emissions reduction. The findings include the need for design methods focused on the design of OAP to guarantee an effective circularity of resources during the whole lifecycle of products and the need of integrating manufacturing processes and material analysis to design products capable of adapting to the CE model. © 2019, Korean Society for Precision Engineering.Departamento Administrativo de Ciencia, Tecnología e Innovación, COLCIENCIASAcknowledgements This work was supported by COLCIENCIAS through the Ph.D. National Scholarship Program No 617-2. Contract UN-OJ-2014-24072.Recurso electrónicoapplication/pdfengKorean Society for Precision Engineeringhttp://creativecommons.org/licenses/by-nc-nd/4.0/info:eu-repo/semantics/restrictedAccessAtribución-NoComercial 4.0 Internacionalhttp://purl.org/coar/access_right/c_16echttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85063869699&doi=10.1007%2fs40684-019-00052-1&partnerID=40&md5=8ee8cc15c4d07ccb4ed6b74528ee85a9Trends and Perspectives of Sustainable Product Design for Open Architecture Products: Facing the Circular Economy Modelinfo:eu-repo/semantics/reviewinfo:eu-repo/semantics/publishedVersionArtículo de revisiónhttp://purl.org/coar/version/c_970fb48d4fbd8a85http://purl.org/coar/resource_type/c_efa0Circular economyOpen architecture productsResearch opportunitiesSustainable designTrendsArchitectureComputer architectureEcodesignEmission controlLife cycleSustainable developmentCircular economyManufacturing processOpen architectureResearch opportunitiesResource optimizationSustainability performanceSustainable product designsTrendsProduct designMesa J.A.Esparragoza I.Maury H.Maxwell, D., van der Vorst, R., Developing sustainable products and services (2003) Journal of Cleaner Production, 11, pp. 883-895Dornfeld, D.A., Moving towards green and sustainable manufacturing (2014) International Journal of Precision Engineering and Manufacturing-Green Technology, 1 (1), pp. 63-66Um, J., Suh, S.-H., Design method for developing a product recovery management system based on life cycle information (2015) International Journal of Precision Engineering and Manufacturing-Green Technology, 2 (2), pp. 173-187Kulatunga, A.K., Karunatilake, N., Weerasinghe, N., Ihalawatta, R., Sustainable manufacturing based decision support model for product design and development process (2015) Procedia CIRP, 26, pp. 87-92Harper, S., Thurston, D., Incorporating environmental impacts in strategic redesign of an engineered system (2008) ASME Journal of Mechanical Design, 130 (3), p. 031101Byggeth, S., Broman, G., Robert, K.-H., A method for sustainable product development based on a modular system of guiding questions (2007) Journal of Cleaner Production, 15, pp. 1-11Sakao, T., A QFD centred design methodology for environmentally conscious product design (2007) International Journal of Production Research, 45 (18-19), pp. 4143-4162Masui, K., Sakao, T., Kobayashi, M., Inaba, A., Applying quality function deployment to environmentally conscious design (2003) International Journal of Quality and Reliability Management, 20 (1), pp. 90-106Bovea, M., Wang, B., Redesign methodology for developing environmentally conscious product (2007) International Journal of Production Research, 45 (18), pp. 4057-4072Ljungberg, L., Materials selection and design for development of sustainable products (2007) Materials and Design, 28, pp. 466-479Khan, F., Sadiq, R., Veitch, B., Life cycle iNdex (LInX): a new indexing procedure for process and product design and decision-making (2004) Journal of Cleaner Production, 12, pp. 59-76Chu, C., Luh, Y., Li, T., Chen, H., Economical green product design based on simplified computer-aided product structure variation (2009) Computers in Industry, 60, pp. 485-500Vinodh, S., Sustainable product design using CAD: a case study in an Indian rotary switches manufacturing organisation (2010) International Journal of Sustainable Engineering, 3 (3), pp. 181-188Younesi, M., Roghanian, E., A framework for sustainable product design: a hybrid fuzzy approach based on quality function deployment for environment (2015) Journal of Cleaner Production, 108, pp. 385-394Giudice, F., Balisteri, F., Risitano, G., A concurrent design method based on DFMA-FEA integrated approach (2009) Concurrent Engineering, 17 (3), pp. 183-202Chang, T., Wang, C., Wang, C., A systematic approach for green design in modular product development (2013) International Journal of Advanced Manufacturing Technology, 68, pp. 2729-2741Beng, L.G., Omar, B., Integrating axiomatic design principles into sustainable product development (2014) International Journal of Precision Engineering and Manufacturing-Green Technology, 1 (2), pp. 107-117Su, J.C.P., Chu, C.-H., Wang, Y.-T., A decision support system to estimate the carbon emissions and cost of product designs (2012) International Journal of Precision Engineering and Manufacturing, 13 (7), pp. 1037-1045Matsumoto, M., Yang, S., Martinsen, K., Kainuma, Y., Trends and research challenges in remanufacturing (2016) International Journal of Precision Engineering And Manufacturing-Green Technology, 3 (1), pp. 129-142Koren, Y., Hu, S., Gu, P., Shpitalni, M., Open-architecture products (2013) CIRP Annals-Manufacturing Technology, 62, pp. 719-729Umeda, Y., Kondoh, S., Shimomura, Y., Tomiyama, T., Development of design methodology for upgradable product based on funtion-behavior-state modeling (2005) Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 19, pp. 161-182Geissdoerfer, M., Savaget, P., Bocken, N.M., Hultink, E.J., The Circular Economy—A new sustainability paradigm? (2017) Journal of Cleaner Production, 143 (1), pp. 757-768Ramani, K., Ramanujan, D., Bernstein, W.Z., Zhao, F., Sutherland, J., Handwerker, C., Choi, J.-K., Thurston, D., Integrated sustainable life cycle design: A review (2010) Journal of Mechanical Design, 132, pp. 0910041-09100415Bovea, M., Pérez-Belis, V., A taxonomy of eco-design tools for integrating environmental requirements into the product design process (2012) Journal of Cleaner Production, 20, pp. 61-71Arnette, N., Brewer, B.L., Choal, T., Design for sustainability (DFS): The intersection of supply chain and environment (2014) Journal of Cleaner Production, 83, pp. 374-390Buchert, T., Kaluza, A., Halstenberg, F.A., Lindow, K., Hayka, H., Stark, R., Enabling product development engineer to select and combine methods for sustainable design (2014) Procedia CIRP, 15, pp. 413-418Brones, F., Monteiro de Carvalho, M., From 50 to 1: Integrating literature toward a systemic ecodesign model (2015) Journal of Cleaner Production, 96, pp. 44-57Pigosso, D., McAloone, T., Rozenfeld, H., Characterization of the state of the art and identification of main trends of ecodesign tools and methods: Classifying three decades of research and implementation (2015) Indian Institute of Science. Journal, 94 (4), pp. 405-427Ceschin, F., Gaziulusoy, I., Evolution of design for sustainability: From product design to design for system innovations and transitions (2016) Design Studies, 47, pp. 118-163Rossi, M., Germani, M., Zamagni, A., Review of ecodesign methods and tools. Barriers and strategies for an effective implementation in industrial companies (2016) Journal of Cleaner Production, 12, pp. 361-373Schöggl, J.-P., Baumgartner, R.J., Hofer, D., Improving sustainability performance in early phases of product design: A checklist for sustainable product development tested in the automotive industry (2017) Journal of Cleaner Production, 140, pp. 1602-1617Benyus, J., (2002) Biomimicry: Invention inspired by nature, , Harper Collins, New YorkBocken, N., de Pauw, I., Bakker, C., van der Grinten, B., Product design and business model strategies for a circular economy (2016) International Journal of Production Management and Engineering, 33, pp. 308-320Bakker, C., Wang, F., Huisman, J., den Hollander, M., Products that go round: Exploring product life extension through design (2014) Journal of Cleaner Production, 69, pp. 10-16Chiu, M.-C., Chu, C.-H., Review of sustainable product design from life cycle perspectives (2012) International Journal of Precision Engineering and Manufacturing, 13 (7), pp. 1259-1272Charnley, F., Lemon, M., Evans, S., Exploring the process of whole system design (2011) Design Studies, 32, pp. 156-179Vanegas, P., Peeters, J.R., Cattrysse, D., Tecchio, P., Ardente, F., Mathieux, F., Dewulf, W., Duflou, J.R., Ease of disassembly of products to support circular economy strategies (2017) Resources, Conservation and Recycling, 135, pp. 323-334Paterson, D.A., Ijomah, W.L., Windmill, J.F., End-of-life decision tool with emphasis on remanufacturing (2017) Journal of Cleaner production, 148, pp. 653-664Kim, S., Moon, S.K., Sustainable platform identification for product family design (2017) Journal of Cleaner Production, 143, pp. 567-581Favi, C., Germani, M., Luzi, A., Mandolini, M., Marconi, M., A design for EOL approach and metrics to favour closed-loop scenarios for products (2017) International Journal of Sustainable Engineering, 10 (3), pp. 136-146Yu, S., Yang, Q., Tao, J., Xu, X., Incorporating quality function deployment with modularity for the end-of-life of a product family (2015) Journal of Cleaner Production, 87, pp. 423-430Wang, X., Chan, H.K., Lee, C.K., Li, D., A hierarchical model for eco-design of consumer electronic products (2015) Technological and economic development of economy, 21 (1), pp. 48-64Sakundarini, N., Taha, Z., Raja Ghazilla, R.A., Abdul-Rashid, S.H., A methodology for optimizing modular design considering product end of life strategies (2015) International Journal of Precision Engineering and Manufacturing, 16 (11), pp. 2359-2367Pialot, O., Millet, D., Cor, E., Bisiaux, J., A method helping to define eco-innovative systems based on upgradability (2015) Procedia CIRP, 30, pp. 185-190Osorio, J., Romero, D., Betancur, M., Molina, A., Design for sustainable mass-customization: Design guidelines for sustainable mass-customized products (2014) Proceedings of the International ICE Conference on Engineering, Technology and Innovation (ICE)Chou, J.-R., An ARIZ-based life cycle engineering model for eco-design (2014) Journal of Cleaner Production, 66, pp. 210-223Mascle, C., Product design for rebirth: Application to aircraft life cycle modelling (2013) Supply Chain Forum: An International Journal, 14 (2), pp. 70-83Zwolinski, P., Lopez-Ontiveros, M.-A., Brissaud, D., Integrated design for remanufacturable products based on product profiles (2006) Journal of Cleaner Production, 14, pp. 1333-1345Gu, P., Hashemian, M., Nee, A., Adaptable design (2004) CIRP Annals-Manufacturing Technology, 53 (2), pp. 539-557Kimura, F., Kato, S., Hata, T., Masuda, T., Product modularization for parts reuse in inverse manufacturing (2001) CIRP Annals-Manufacturing Technology, 50 (1), pp. 89-92Koga, T., Aoyama, K., Modular design method for sustainable life-cycle of product family considering future market changes (2008) Proceedings of the ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, , New York, USAYang, Q., Yu, S., Jian, D., A modular method of developing an eco-product family considering reusability and recyclability of customer products (2014) Journal of Cleaner Production, 64, pp. 254-265Wang, W., Tseng, M.M., Design for sustainable manufacturing: Applying modular design methodology to manage product end-of-life strategy (2011) International Journal of Product Lifecycle Management, 5 (2-3), pp. 164-182Martinez, M., Xue, D., A modular design approach for modeling and optimiation of adaptable products considering the whole product utilization spans (2017) Journal of Mechanical Engineering Science, 232 (7), pp. 1146-1164. , 1–19Amaya, J., Lelah, A., Zwolinski, P., Design for intensified use in product–service systems using lifecycle analysis (2014) Journal of Engineering Design, 25 (7-9), pp. 280-302Mestre, A., Cooper, T., Circular product design. A multiple loops life cycle design approach for the circular economy (2017) The Design Journal, 20 (sup1), pp. S1620-S1635http://purl.org/coar/resource_type/c_dcae04bcTHUMBNAILMiniProdInv.pngMiniProdInv.pngimage/png23941https://repositorio.utb.edu.co/bitstream/20.500.12585/9158/1/MiniProdInv.png0cb0f101a8d16897fb46fc914d3d7043MD5120.500.12585/9158oai:repositorio.utb.edu.co:20.500.12585/91582021-02-02 14:42:02.784Repositorio Institucional UTBrepositorioutb@utb.edu.co |