Optimization Design by Coupling Computational Fluid Dynamics and Genetic Algorithm

Nowadays, optimal design of equipment is one of the most practical issues in modem industry. Due to the requirements of deploying time, reliability, and design cost, better approaches than the conventional ones like experimental procedures are required. Moreover, the rapid development of computing power in recent decades opens a chance for researchers to employ calculation tools in complex configurations. In this chapter, we demonstrate a kind of modern optimization method by coupling computational fluid dynamics (CFD) and genetic algorithms (GAs). The brief introduction of GAs and CFD package OpenFOAM will be performed. The advantage of this approach as well as the difficulty that we must tackle will be analyzed. In addition, this chapter performs a study case in which an automated procedure to optimize the flow distribution in a manifold is established. The design point is accomplished by balancing the liquid-phase flow rate at each outlet, and the controlled parameter is a dimension of baffle between each channel. Using this methodology, we finally find a set of results improving the distribution of flow.

• Tipo de recurso: Book
• Fecha de publicación: 2018
• Institución: Universidad de Bogotá Jorge Tadeo Lozano
• Repositorio: Expeditio: repositorio UTadeo
• Idioma: eng
• OAI Identifier: oai:expeditiorepositorio.utadeo.edu.co:20.500.12010/16707
• Acceso en línea: http://hdl.handle.net/20.500.12010/16707
• Palabra clave: Informática; Fluidos computacional; Algoritmo; Informática -- algoritmo
• License: Abierto (Texto Completo)