Automatic method for vickers hardness estimation by image processing

Hardness is one of the most important mechanical properties of materials, since it is used to estimate their quality and to determine their suitability for a particular application. One method of determining quality is the Vickers hardness test, in which the resistance to plastic deformation at the surface of the material is measured after applying force with an indenter. The hardness is measured from the sample image, which is a tedious, time-consuming, and prone to human error procedure. Therefore, in this work, a new automatic method based on image processing techniques is proposed, allowing for obtaining results quickly and more accurately even with high irregularities in the indentation mark. For the development and validation of the method, a set of microscopy images of samples indented with applied forces of 5 and 10 on AISI D2 steel with and without quenching, tempering heat treatment and samples coated with titanium niobium nitride (TiNbN) was used. The proposed method was implemented as a plugin of the ImageJ program, allowing for obtaining reproducible Vickers hardness results in an average time of 2.05 seconds with an accuracy of 98.3% and a maximum error of 4.5% with respect to the values obtained manually, used as a golden standard.

• Autores: Polanco,Jonatan D.; Jacanamejoy-Jamioy, Carlos; Mambuscay, Claudia L.; Piamba, Jeferson F.; Forero, Manuel G.
• Tipo de recurso: Article of journal
• Fecha de publicación: 2022
• Institución: Universidad de Ibagué
• Repositorio: Repositorio Universidad de Ibagué
• Idioma: eng
• OAI Identifier: oai:repositorio.unibague.edu.co:20.500.12313/3883
• Acceso en línea: https://hdl.handle.net/20.500.12313/3883
• Palabra clave: Hardness estimation; Image processing; Mechanics of materials; Steel heat treating; Vickers hardness
• Rights: openAccess
• License: http://purl.org/coar/access_right/c_abf2