Cálculo de huella de agua para las empresas de la cámara de la industria de pulpa, papel y cartón de la andi bajo la norma ntc ISO 14046 de 2017

This work shows the results obtained from the cooperation project between the Chamber of the Pulp, Paper and Cardboard Industry and El Bosque University. Here is showed the water footprint calculation for the companies of the Chamber, specifically for bond, kraft and soft paper types under the guidelines of the NTC ISO 14046 of 2017. To this end, the parameters required by the Standard were identified, organizing the development of this work in three phases. The first phase consisted in determining the requirements that the standard demands; the second phase in the creation of an inventory matrix and the corresponding collection of information (primary and secondary) and the last phase was the development of the water footprint calculation along with its proper interpretation and analysis through water impact indicators by type of paper. In this way, a calculation model was created, through which the water footprint was obtained for each company in terms of scarcity, consumption and degradation, and specifically, for each type of paper. Thus, a global result was generated for the Chamber, in which new strategies for the integral management of the water resource are dimensioned.

• Autores: Martínez Cuervo, Angie Lorena; Santofimio Varón, Luisa María
• Tipo de recurso: Trabajo de grado de pregrado
• Fecha de publicación: 2020
• Institución: Universidad El Bosque
• Repositorio: Repositorio U. El Bosque
• Idioma: spa
• OAI Identifier: oai:repositorio.unbosque.edu.co:20.500.12495/5624
• Acceso en línea: http://hdl.handle.net/20.500.12495/5624
• Palabra clave: Huella de agua; Impactos ambientales; Análisis de ciclo de vida; Papel; 628; Paper; Water footprint; Environmental impacts; Life cycle assessment; Conversión de residuos; Residuos de papel -- Reciclaje; Productos de residuos
• Rights: openAccess
• License: Attribution-NonCommercial-ShareAlike 4.0 International