An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel
The effect of the pulse current, pulse on time and pulse off time on the surface roughness of AISI 304 stainless steel workpieces produced by electric discharge machining (EDM) using grade GSP-70 graphite electrodes was studied. A factorial design was performed, considering two levels for each of th...
- Autores:
-
HERNÁNDEZ CASTILLO, IGNACIO
SÁNCHEZ LÓPEZ, ORQUÍDEA
LANCHO ROMERO, GUILLERMO ARTURO
CASTAÑEDA ROLDÁN, CUAUHTÉMOC HÉCTOR
- Tipo de recurso:
- Article of journal
- Fecha de publicación:
- 2018
- Institución:
- Universidad Nacional de Colombia
- Repositorio:
- Universidad Nacional de Colombia
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.unal.edu.co:unal/67534
- Acceso en línea:
- https://repositorio.unal.edu.co/handle/unal/67534
http://bdigital.unal.edu.co/68563/
- Palabra clave:
- 62 Ingeniería y operaciones afines / Engineering
Stainless steel
electric discharge machining
factorial design
average roughness.
Acero inoxidable AISI 304
maquinado por descarga eléctrica
diseño factorial
rugosidad media.
- Rights
- openAccess
- License
- Atribución-NoComercial 4.0 Internacional
| id |
UNACIONAL2_f5b8dd672cd94d92fef378246066a228 |
|---|---|
| oai_identifier_str |
oai:repositorio.unal.edu.co:unal/67534 |
| network_acronym_str |
UNACIONAL2 |
| network_name_str |
Universidad Nacional de Colombia |
| repository_id_str |
|
| dc.title.spa.fl_str_mv |
An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel |
| title |
An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel |
| spellingShingle |
An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel 62 Ingeniería y operaciones afines / Engineering Stainless steel electric discharge machining factorial design average roughness. Acero inoxidable AISI 304 maquinado por descarga eléctrica diseño factorial rugosidad media. |
| title_short |
An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel |
| title_full |
An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel |
| title_fullStr |
An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel |
| title_full_unstemmed |
An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel |
| title_sort |
An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel |
| dc.creator.fl_str_mv |
HERNÁNDEZ CASTILLO, IGNACIO SÁNCHEZ LÓPEZ, ORQUÍDEA LANCHO ROMERO, GUILLERMO ARTURO CASTAÑEDA ROLDÁN, CUAUHTÉMOC HÉCTOR |
| dc.contributor.author.spa.fl_str_mv |
HERNÁNDEZ CASTILLO, IGNACIO SÁNCHEZ LÓPEZ, ORQUÍDEA LANCHO ROMERO, GUILLERMO ARTURO CASTAÑEDA ROLDÁN, CUAUHTÉMOC HÉCTOR |
| dc.subject.ddc.spa.fl_str_mv |
62 Ingeniería y operaciones afines / Engineering |
| topic |
62 Ingeniería y operaciones afines / Engineering Stainless steel electric discharge machining factorial design average roughness. Acero inoxidable AISI 304 maquinado por descarga eléctrica diseño factorial rugosidad media. |
| dc.subject.proposal.spa.fl_str_mv |
Stainless steel electric discharge machining factorial design average roughness. Acero inoxidable AISI 304 maquinado por descarga eléctrica diseño factorial rugosidad media. |
| description |
The effect of the pulse current, pulse on time and pulse off time on the surface roughness of AISI 304 stainless steel workpieces produced by electric discharge machining (EDM) using grade GSP-70 graphite electrodes was studied. A factorial design was performed, considering two levels for each of the three established parameters. From the statistical analysis, it was obtained that the pulse current and pulse on time are the most significant machining parameters on the obtained surface roughness values of the stainless steel AISI 304 workpieces machined by EDM. On the other hand, the regression analysis of a second order model was done to estimate the average roughness (Ra) in terms of the pulse current, pulse on time and pulse off time. Finally, the mean absolute percentage error (MAPE) of the roughness values estimated by the second order regression model and the roughness obtained experimentally is also presented. |
| publishDate |
2018 |
| dc.date.issued.spa.fl_str_mv |
2018-05-01 |
| dc.date.accessioned.spa.fl_str_mv |
2019-07-03T04:28:56Z |
| dc.date.available.spa.fl_str_mv |
2019-07-03T04:28:56Z |
| dc.type.spa.fl_str_mv |
Artículo de revista |
| dc.type.coar.fl_str_mv |
http://purl.org/coar/resource_type/c_2df8fbb1 |
| dc.type.driver.spa.fl_str_mv |
info:eu-repo/semantics/article |
| dc.type.version.spa.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
| dc.type.coar.spa.fl_str_mv |
http://purl.org/coar/resource_type/c_6501 |
| dc.type.coarversion.spa.fl_str_mv |
http://purl.org/coar/version/c_970fb48d4fbd8a85 |
| dc.type.content.spa.fl_str_mv |
Text |
| dc.type.redcol.spa.fl_str_mv |
http://purl.org/redcol/resource_type/ART |
| format |
http://purl.org/coar/resource_type/c_6501 |
| status_str |
publishedVersion |
| dc.identifier.issn.spa.fl_str_mv |
ISSN: 2248-8723 |
| dc.identifier.uri.none.fl_str_mv |
https://repositorio.unal.edu.co/handle/unal/67534 |
| dc.identifier.eprints.spa.fl_str_mv |
http://bdigital.unal.edu.co/68563/ |
| identifier_str_mv |
ISSN: 2248-8723 |
| url |
https://repositorio.unal.edu.co/handle/unal/67534 http://bdigital.unal.edu.co/68563/ |
| dc.language.iso.spa.fl_str_mv |
spa |
| language |
spa |
| dc.relation.spa.fl_str_mv |
https://revistas.unal.edu.co/index.php/ingeinv/article/view/67711 |
| dc.relation.ispartof.spa.fl_str_mv |
Universidad Nacional de Colombia Revistas electrónicas UN Ingeniería e Investigación Ingeniería e Investigación |
| dc.relation.references.spa.fl_str_mv |
HERNÁNDEZ CASTILLO, IGNACIO and SÁNCHEZ LÓPEZ, ORQUÍDEA and LANCHO ROMERO, GUILLERMO ARTURO and CASTAÑEDA ROLDÁN, CUAUHTÉMOC HÉCTOR (2018) An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel. Ingeniería e Investigación, 38 (2). pp. 90-96. ISSN 2248-8723 |
| dc.rights.spa.fl_str_mv |
Derechos reservados - Universidad Nacional de Colombia |
| dc.rights.coar.fl_str_mv |
http://purl.org/coar/access_right/c_abf2 |
| dc.rights.license.spa.fl_str_mv |
Atribución-NoComercial 4.0 Internacional |
| dc.rights.uri.spa.fl_str_mv |
http://creativecommons.org/licenses/by-nc/4.0/ |
| dc.rights.accessrights.spa.fl_str_mv |
info:eu-repo/semantics/openAccess |
| rights_invalid_str_mv |
Atribución-NoComercial 4.0 Internacional Derechos reservados - Universidad Nacional de Colombia http://creativecommons.org/licenses/by-nc/4.0/ http://purl.org/coar/access_right/c_abf2 |
| eu_rights_str_mv |
openAccess |
| dc.format.mimetype.spa.fl_str_mv |
application/pdf |
| dc.publisher.spa.fl_str_mv |
Universidad Nacional de Colombia - Sede Bogotá - Facultad de Ingeniería |
| institution |
Universidad Nacional de Colombia |
| bitstream.url.fl_str_mv |
https://repositorio.unal.edu.co/bitstream/unal/67534/1/67711-393151-1-PB.pdf https://repositorio.unal.edu.co/bitstream/unal/67534/2/67711-393151-1-PB.pdf.jpg |
| bitstream.checksum.fl_str_mv |
a5b784b37d788033b411032b0d0c64db 3cf661f5935554d3c1cf58b6db2aff79 |
| bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 |
| repository.name.fl_str_mv |
Repositorio Institucional Universidad Nacional de Colombia |
| repository.mail.fl_str_mv |
repositorio_nal@unal.edu.co |
| _version_ |
1814089526372466688 |
| spelling |
Atribución-NoComercial 4.0 InternacionalDerechos reservados - Universidad Nacional de Colombiahttp://creativecommons.org/licenses/by-nc/4.0/info:eu-repo/semantics/openAccesshttp://purl.org/coar/access_right/c_abf2HERNÁNDEZ CASTILLO, IGNACIO8b26e697-c6fa-43bf-9444-1fdd8bb9026a300SÁNCHEZ LÓPEZ, ORQUÍDEAb93e1a60-f8ca-4963-849a-b2e732dd7f9e300LANCHO ROMERO, GUILLERMO ARTURO994c0f71-d855-42fb-aca4-1935892548aa300CASTAÑEDA ROLDÁN, CUAUHTÉMOC HÉCTOR4f777ed7-cfb9-46af-b2fd-91f6e249440d3002019-07-03T04:28:56Z2019-07-03T04:28:56Z2018-05-01ISSN: 2248-8723https://repositorio.unal.edu.co/handle/unal/67534http://bdigital.unal.edu.co/68563/The effect of the pulse current, pulse on time and pulse off time on the surface roughness of AISI 304 stainless steel workpieces produced by electric discharge machining (EDM) using grade GSP-70 graphite electrodes was studied. A factorial design was performed, considering two levels for each of the three established parameters. From the statistical analysis, it was obtained that the pulse current and pulse on time are the most significant machining parameters on the obtained surface roughness values of the stainless steel AISI 304 workpieces machined by EDM. On the other hand, the regression analysis of a second order model was done to estimate the average roughness (Ra) in terms of the pulse current, pulse on time and pulse off time. Finally, the mean absolute percentage error (MAPE) of the roughness values estimated by the second order regression model and the roughness obtained experimentally is also presented.En este artículo se presenta el estudio del efecto de la intensidad de la corriente eléctrica, tiempo de pulso y tiempo inactivo en la rugosidad superficial del acero inoxidable AISI 304 generada mediante el maquinado por descarga eléctrica (MDE), empleando electrodos de grafito grado GSP-70. Se realizó un diseño factorial, considerando dos niveles para cada uno de los tres factores establecidos. Del análisis estadístico se obtuvo que la intensidad de la corriente eléctrica y el tiempo de pulso son los parámetros de maquinado más significativos en la rugosidad superficial del acero inoxidable AISI 304 obtenida por MDE. Por otra parte, se hizo el análisis de regresión de un modelo de segundo orden para estimar la rugosidad media (Ra) en términos de la intensidad de la corriente eléctrica, tiempo de pulso y tiempo inactivo. Por último, se presenta el error porcentual absoluto medio (EPAM) de la rugosidad estimada mediante el modelo de regresión de segundo orden y la rugosidad obtenida experimentalmente.application/pdfspaUniversidad Nacional de Colombia - Sede Bogotá - Facultad de Ingenieríahttps://revistas.unal.edu.co/index.php/ingeinv/article/view/67711Universidad Nacional de Colombia Revistas electrónicas UN Ingeniería e InvestigaciónIngeniería e InvestigaciónHERNÁNDEZ CASTILLO, IGNACIO and SÁNCHEZ LÓPEZ, ORQUÍDEA and LANCHO ROMERO, GUILLERMO ARTURO and CASTAÑEDA ROLDÁN, CUAUHTÉMOC HÉCTOR (2018) An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel. Ingeniería e Investigación, 38 (2). pp. 90-96. ISSN 2248-872362 Ingeniería y operaciones afines / EngineeringStainless steelelectric discharge machiningfactorial designaverage roughness.Acero inoxidable AISI 304maquinado por descarga eléctricadiseño factorialrugosidad media.An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steelArtículo de revistainfo:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501http://purl.org/coar/resource_type/c_2df8fbb1http://purl.org/coar/version/c_970fb48d4fbd8a85Texthttp://purl.org/redcol/resource_type/ARTORIGINAL67711-393151-1-PB.pdfapplication/pdf1640235https://repositorio.unal.edu.co/bitstream/unal/67534/1/67711-393151-1-PB.pdfa5b784b37d788033b411032b0d0c64dbMD51THUMBNAIL67711-393151-1-PB.pdf.jpg67711-393151-1-PB.pdf.jpgGenerated Thumbnailimage/jpeg8926https://repositorio.unal.edu.co/bitstream/unal/67534/2/67711-393151-1-PB.pdf.jpg3cf661f5935554d3c1cf58b6db2aff79MD52unal/67534oai:repositorio.unal.edu.co:unal/675342024-05-22 23:33:39.748Repositorio Institucional Universidad Nacional de Colombiarepositorio_nal@unal.edu.co |