Spatial variability of infiltration and its relationship to some physical properties
Water infiltration into soil is one of the basic factors for estimating irrigation intensity according to the plants’ requirements; this is aimed at avoiding problems of surface run-off and degradation. The purpose of the present investigation was to determine the spatial variation of infiltration a...
- Autores:
-
da Silva Martins, Alba Leonor
Gomes de Moura, Emanoel
Camacho Tamayo, Jesús H.
- Tipo de recurso:
- Article of journal
- Fecha de publicación:
- 2010
- Institución:
- Universidad Nacional de Colombia
- Repositorio:
- Universidad Nacional de Colombia
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.unal.edu.co:unal/29658
- Acceso en línea:
- https://repositorio.unal.edu.co/handle/unal/29658
http://bdigital.unal.edu.co/19706/
http://bdigital.unal.edu.co/19706/2/
http://bdigital.unal.edu.co/19706/3/
- Palabra clave:
- geoestadística
semivariograma
kriging
porosidad
geoestatistics
semivarigram
kriging
porosity
- Rights
- openAccess
- License
- Atribución-NoComercial 4.0 Internacional
Summary: | Water infiltration into soil is one of the basic factors for estimating irrigation intensity according to the plants’ requirements; this is aimed at avoiding problems of surface run-off and degradation. The purpose of the present investigation was to determine the spatial variation of infiltration and its relationship to some physical properties of soil by means of geostatistical techniques in Typic Plinthaquult soils having average texture and flat relief. A 113 point mesh was designed, having a regular distance of 10 m between points, samples being taken from 0 to 0.20 meters depth. Sand, silt and clay content, bulk density, macroporosity, microporosity and total porosity were determined. Infiltration tests were carried out in the field by means of a 15 cm diameter ring. Descriptive statistics and geostatistics were used for analysing the data. Infiltration, silt and microporosity data did not fit a normal distribution curve. Infiltration had high variability, having an average 36.03 mm h-1. Total porosity was 56.73%, this being the only property that did not show spatial dependency. The smallest ranges were observed for bulk density, macroporosity and microporosity, having values of less than 40 m. The smallest degrees of spatial dependence were observed for infiltration, silt and clay, evidence also being shown of the influence of silt and clay on infiltration rate. Contour maps were constructed; fitting them to the semivariogram models, together with studying the correlations, led to establishing re- lationships between the properties. |
---|