Surface hardness prediction based on cutting parameters in turning of annealed AISI 1020 steel
The influence of various cutting parameters, cutting speed (Vc), feed rate (f), and depth of cut (d) on the surface hardness developed by turning annealed AISI 1020 steel using carbide insert tools was investigated. It was shown from the measured results that hardness increases with the increase in...
- Autores:
-
Zurita Hurtado, Omar Jose
Di Graci, Veronica
Capace, Maria Cristina
- Tipo de recurso:
- Article of journal
- Fecha de publicación:
- 2017
- Institución:
- Universidad Nacional de Colombia
- Repositorio:
- Universidad Nacional de Colombia
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.unal.edu.co:unal/60867
- Acceso en línea:
- https://repositorio.unal.edu.co/handle/unal/60867
http://bdigital.unal.edu.co/59249/
- Palabra clave:
- 62 Ingeniería y operaciones afines / Engineering
AISI 1020
ANOVA
cutting speed
depth of cut
feed rate
surface hardness
turning
AISI 1020
ANOVA
velocidad de corte
profundidad de corte
velocidad de avance
dureza superficial
torneado
- Rights
- openAccess
- License
- Atribución-NoComercial 4.0 Internacional
| id |
UNACIONAL2_9b797f8e3337a69f6af58bfc214be552 |
|---|---|
| oai_identifier_str |
oai:repositorio.unal.edu.co:unal/60867 |
| network_acronym_str |
UNACIONAL2 |
| network_name_str |
Universidad Nacional de Colombia |
| repository_id_str |
|
| spelling |
Atribución-NoComercial 4.0 InternacionalDerechos reservados - Universidad Nacional de Colombiahttp://creativecommons.org/licenses/by-nc/4.0/info:eu-repo/semantics/openAccesshttp://purl.org/coar/access_right/c_abf2Zurita Hurtado, Omar Jose3dce0c4a-72d7-4d44-9558-598217cfbe0e300Di Graci, Veronica0129b57d-1eb0-4970-bdad-28ceb7e05f39300Capace, Maria Cristina019a209c-4c60-472e-ba15-70c8514c0a5e3002019-07-02T19:18:59Z2019-07-02T19:18:59Z2017-10-01ISSN: 2346-2183https://repositorio.unal.edu.co/handle/unal/60867http://bdigital.unal.edu.co/59249/The influence of various cutting parameters, cutting speed (Vc), feed rate (f), and depth of cut (d) on the surface hardness developed by turning annealed AISI 1020 steel using carbide insert tools was investigated. It was shown from the measured results that hardness increases with the increase in all the studied parameters. An analysis of variance (ANOVA) was employed to determine the contributions of each parameter on the response variable. From the results, it was found that cutting speed has the most significant role in producing surface hardness (69.2 %) followed by feed rate (24.4 %), while the depth of cut has the lesser effect (6.4%). Finally, a simple equation is proposed, for the prediction of the values of surface hardness, which accounts for the effects of process parameters.La influencia de varios parámetros de corte, velocidad de corte (Vc), velocidad de avance (f), y la profundidad de corte (d) en la dureza superficial desarrollada por torneado en acero AISI 1020 recocido utilizando herramientas de insertos de carburo fue investigada. Se demostró a partir de los resultados medidos que la dureza aumenta con el aumento en todos los parámetros. Se empleó un análisis de varianza (ANOVA) para determinar las contribuciones de cada parámetro estudiado en la variable de respuesta. A partir de los resultados, se encontró que la velocidad de corte tiene el rol más importante en la producción de dureza superficial (69.2 %), seguido de la velocidad de avance (24.4 %), mientras que la profundidad de corte tiene el efecto menor (6.4 %). Finalmente, se propone una ecuación simple, para la predicción de los valores de dureza superficial, que representa los efectos de los parámetros del proceso.application/pdfspaUniversidad Nacional de Colombia (Sede Medellín). Facultad de Minas.https://revistas.unal.edu.co/index.php/dyna/article/view/65481Universidad Nacional de Colombia Revistas electrónicas UN DynaDynaZurita Hurtado, Omar Jose and Di Graci, Veronica and Capace, Maria Cristina (2017) Surface hardness prediction based on cutting parameters in turning of annealed AISI 1020 steel. DYNA, 84 (203). pp. 31-36. ISSN 2346-218362 Ingeniería y operaciones afines / EngineeringAISI 1020ANOVAcutting speeddepth of cutfeed ratesurface hardnessturningAISI 1020ANOVAvelocidad de corteprofundidad de cortevelocidad de avancedureza superficialtorneadoSurface hardness prediction based on cutting parameters in turning of annealed AISI 1020 steelArtículo de revistainfo:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501http://purl.org/coar/resource_type/c_2df8fbb1http://purl.org/coar/version/c_970fb48d4fbd8a85Texthttp://purl.org/redcol/resource_type/ARTORIGINAL65481-356391-2-PB.pdfapplication/pdf651136https://repositorio.unal.edu.co/bitstream/unal/60867/1/65481-356391-2-PB.pdf358499b8de5fc33fb5a16bd3e9435296MD51THUMBNAIL65481-356391-2-PB.pdf.jpg65481-356391-2-PB.pdf.jpgGenerated Thumbnailimage/jpeg9745https://repositorio.unal.edu.co/bitstream/unal/60867/2/65481-356391-2-PB.pdf.jpg61c18087597de2fc45fd0afdf83a08d1MD52unal/60867oai:repositorio.unal.edu.co:unal/608672023-04-09 23:05:09.91Repositorio Institucional Universidad Nacional de Colombiarepositorio_nal@unal.edu.co |
| dc.title.spa.fl_str_mv |
Surface hardness prediction based on cutting parameters in turning of annealed AISI 1020 steel |
| title |
Surface hardness prediction based on cutting parameters in turning of annealed AISI 1020 steel |
| spellingShingle |
Surface hardness prediction based on cutting parameters in turning of annealed AISI 1020 steel 62 Ingeniería y operaciones afines / Engineering AISI 1020 ANOVA cutting speed depth of cut feed rate surface hardness turning AISI 1020 ANOVA velocidad de corte profundidad de corte velocidad de avance dureza superficial torneado |
| title_short |
Surface hardness prediction based on cutting parameters in turning of annealed AISI 1020 steel |
| title_full |
Surface hardness prediction based on cutting parameters in turning of annealed AISI 1020 steel |
| title_fullStr |
Surface hardness prediction based on cutting parameters in turning of annealed AISI 1020 steel |
| title_full_unstemmed |
Surface hardness prediction based on cutting parameters in turning of annealed AISI 1020 steel |
| title_sort |
Surface hardness prediction based on cutting parameters in turning of annealed AISI 1020 steel |
| dc.creator.fl_str_mv |
Zurita Hurtado, Omar Jose Di Graci, Veronica Capace, Maria Cristina |
| dc.contributor.author.spa.fl_str_mv |
Zurita Hurtado, Omar Jose Di Graci, Veronica Capace, Maria Cristina |
| dc.subject.ddc.spa.fl_str_mv |
62 Ingeniería y operaciones afines / Engineering |
| topic |
62 Ingeniería y operaciones afines / Engineering AISI 1020 ANOVA cutting speed depth of cut feed rate surface hardness turning AISI 1020 ANOVA velocidad de corte profundidad de corte velocidad de avance dureza superficial torneado |
| dc.subject.proposal.spa.fl_str_mv |
AISI 1020 ANOVA cutting speed depth of cut feed rate surface hardness turning AISI 1020 ANOVA velocidad de corte profundidad de corte velocidad de avance dureza superficial torneado |
| description |
The influence of various cutting parameters, cutting speed (Vc), feed rate (f), and depth of cut (d) on the surface hardness developed by turning annealed AISI 1020 steel using carbide insert tools was investigated. It was shown from the measured results that hardness increases with the increase in all the studied parameters. An analysis of variance (ANOVA) was employed to determine the contributions of each parameter on the response variable. From the results, it was found that cutting speed has the most significant role in producing surface hardness (69.2 %) followed by feed rate (24.4 %), while the depth of cut has the lesser effect (6.4%). Finally, a simple equation is proposed, for the prediction of the values of surface hardness, which accounts for the effects of process parameters. |
| publishDate |
2017 |
| dc.date.issued.spa.fl_str_mv |
2017-10-01 |
| dc.date.accessioned.spa.fl_str_mv |
2019-07-02T19:18:59Z |
| dc.date.available.spa.fl_str_mv |
2019-07-02T19:18:59Z |
| dc.type.spa.fl_str_mv |
Artículo de revista |
| dc.type.coar.fl_str_mv |
http://purl.org/coar/resource_type/c_2df8fbb1 |
| dc.type.driver.spa.fl_str_mv |
info:eu-repo/semantics/article |
| dc.type.version.spa.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
| dc.type.coar.spa.fl_str_mv |
http://purl.org/coar/resource_type/c_6501 |
| dc.type.coarversion.spa.fl_str_mv |
http://purl.org/coar/version/c_970fb48d4fbd8a85 |
| dc.type.content.spa.fl_str_mv |
Text |
| dc.type.redcol.spa.fl_str_mv |
http://purl.org/redcol/resource_type/ART |
| format |
http://purl.org/coar/resource_type/c_6501 |
| status_str |
publishedVersion |
| dc.identifier.issn.spa.fl_str_mv |
ISSN: 2346-2183 |
| dc.identifier.uri.none.fl_str_mv |
https://repositorio.unal.edu.co/handle/unal/60867 |
| dc.identifier.eprints.spa.fl_str_mv |
http://bdigital.unal.edu.co/59249/ |
| identifier_str_mv |
ISSN: 2346-2183 |
| url |
https://repositorio.unal.edu.co/handle/unal/60867 http://bdigital.unal.edu.co/59249/ |
| dc.language.iso.spa.fl_str_mv |
spa |
| language |
spa |
| dc.relation.spa.fl_str_mv |
https://revistas.unal.edu.co/index.php/dyna/article/view/65481 |
| dc.relation.ispartof.spa.fl_str_mv |
Universidad Nacional de Colombia Revistas electrónicas UN Dyna Dyna |
| dc.relation.references.spa.fl_str_mv |
Zurita Hurtado, Omar Jose and Di Graci, Veronica and Capace, Maria Cristina (2017) Surface hardness prediction based on cutting parameters in turning of annealed AISI 1020 steel. DYNA, 84 (203). pp. 31-36. ISSN 2346-2183 |
| dc.rights.spa.fl_str_mv |
Derechos reservados - Universidad Nacional de Colombia |
| dc.rights.coar.fl_str_mv |
http://purl.org/coar/access_right/c_abf2 |
| dc.rights.license.spa.fl_str_mv |
Atribución-NoComercial 4.0 Internacional |
| dc.rights.uri.spa.fl_str_mv |
http://creativecommons.org/licenses/by-nc/4.0/ |
| dc.rights.accessrights.spa.fl_str_mv |
info:eu-repo/semantics/openAccess |
| rights_invalid_str_mv |
Atribución-NoComercial 4.0 Internacional Derechos reservados - Universidad Nacional de Colombia http://creativecommons.org/licenses/by-nc/4.0/ http://purl.org/coar/access_right/c_abf2 |
| eu_rights_str_mv |
openAccess |
| dc.format.mimetype.spa.fl_str_mv |
application/pdf |
| dc.publisher.spa.fl_str_mv |
Universidad Nacional de Colombia (Sede Medellín). Facultad de Minas. |
| institution |
Universidad Nacional de Colombia |
| bitstream.url.fl_str_mv |
https://repositorio.unal.edu.co/bitstream/unal/60867/1/65481-356391-2-PB.pdf https://repositorio.unal.edu.co/bitstream/unal/60867/2/65481-356391-2-PB.pdf.jpg |
| bitstream.checksum.fl_str_mv |
358499b8de5fc33fb5a16bd3e9435296 61c18087597de2fc45fd0afdf83a08d1 |
| bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 |
| repository.name.fl_str_mv |
Repositorio Institucional Universidad Nacional de Colombia |
| repository.mail.fl_str_mv |
repositorio_nal@unal.edu.co |
| _version_ |
1814089340861546496 |