Metallic cathode surface modification by using low pressure pulsed vacuum arc discharge

Electrical discharges in a pulsed vacuum arc system at low pressure were produced using a peak current of 100A with pulses of 30 ms. Discharges were carried out applying a voltage of 104 V between the electrodes. Materials used as cathode were Ti, Zr, Ni, Cu, Mo and W. The cathodes morphology after...

Full description

Autores:
Retrepo Parra, Elisabeth
García García, Luis Alpidio
Escobar Rincón, Daniel
De la roche Yepes, Jhonattan
Arango Arango, Pedro José
Tipo de recurso:
Article of journal
Fecha de publicación:
2012
Institución:
Universidad Nacional de Colombia
Repositorio:
Universidad Nacional de Colombia
Idioma:
spa
OAI Identifier:
oai:repositorio.unal.edu.co:unal/37680
Acceso en línea:
https://repositorio.unal.edu.co/handle/unal/37680
http://bdigital.unal.edu.co/27764/
Palabra clave:
Morphology
Spots
Arc voltage
Metallic cathodes
Rights
openAccess
License
Atribución-NoComercial 4.0 Internacional
id UNACIONAL2_9ada79b224ab47228d5967e6dfe6fa1c
oai_identifier_str oai:repositorio.unal.edu.co:unal/37680
network_acronym_str UNACIONAL2
network_name_str Universidad Nacional de Colombia
repository_id_str
spelling Atribución-NoComercial 4.0 InternacionalDerechos reservados - Universidad Nacional de Colombiahttp://creativecommons.org/licenses/by-nc/4.0/info:eu-repo/semantics/openAccesshttp://purl.org/coar/access_right/c_abf2Retrepo Parra, Elisabethe119893c-73e7-4d83-bf41-8328158f7e2d300García García, Luis Alpidiodd8553bc-82cb-45ee-b549-3c5487803e23300Escobar Rincón, Danielb45207b9-9320-4339-9e6f-fb46e0ca7c50300De la roche Yepes, Jhonattanc8f9f897-c4d8-4b74-9c44-1ae7e6f829dd300Arango Arango, Pedro José289cc012-da76-42a0-bf32-4547f0e1b2863002019-06-28T01:55:12Z2019-06-28T01:55:12Z2012https://repositorio.unal.edu.co/handle/unal/37680http://bdigital.unal.edu.co/27764/Electrical discharges in a pulsed vacuum arc system at low pressure were produced using a peak current of 100A with pulses of 30 ms. Discharges were carried out applying a voltage of 104 V between the electrodes. Materials used as cathode were Ti, Zr, Ni, Cu, Mo and W. The cathodes morphology after the discharge production was studied using the scanning electron microscopy (SEM) technique. Ti and Zr presented the highest erosion. Moreover, circular craters on Ni and Mo cathodes were observed and a region of the Zr cathode, with high erosion and great quantity of craters was analyzed. The discharge voltage for each material was measured, obtaining arc voltage values. Finally, relationships between arc voltages and some material characteristics as melting point and boiling point were observed, presenting an exponential tendency.application/pdfspaUniversidad Nacional de Colombia Sede Medellínhttp://revistas.unal.edu.co/index.php/dyna/article/view/25655Universidad Nacional de Colombia Revistas electrónicas UN DynaDynaDyna; Vol. 79, núm. 176 (2012); 90-98 DYNA; Vol. 79, núm. 176 (2012); 90-98 2346-2183 0012-7353Retrepo Parra, Elisabeth and García García, Luis Alpidio and Escobar Rincón, Daniel and De la roche Yepes, Jhonattan and Arango Arango, Pedro José (2012) Metallic cathode surface modification by using low pressure pulsed vacuum arc discharge. Dyna; Vol. 79, núm. 176 (2012); 90-98 DYNA; Vol. 79, núm. 176 (2012); 90-98 2346-2183 0012-7353 .Metallic cathode surface modification by using low pressure pulsed vacuum arc dischargeArtículo de revistainfo:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/resource_type/c_6501http://purl.org/coar/resource_type/c_2df8fbb1http://purl.org/coar/version/c_970fb48d4fbd8a85Texthttp://purl.org/redcol/resource_type/ARTMorphologySpotsArc voltageMetallic cathodesORIGINAL25655-151101-1-PB.pdfapplication/pdf1627203https://repositorio.unal.edu.co/bitstream/unal/37680/1/25655-151101-1-PB.pdf46d2fd6dffae151a28ab817eeabfd43dMD5125655-191454-1-PB.htmltext/html38527https://repositorio.unal.edu.co/bitstream/unal/37680/2/25655-191454-1-PB.htmld0b89235d474b7aafa5c58ada4b33255MD5225655-89999-1-SP.docapplication/msword275968https://repositorio.unal.edu.co/bitstream/unal/37680/3/25655-89999-1-SP.docbe01d27b3798cd23705b50c1e79eab59MD53THUMBNAIL25655-151101-1-PB.pdf.jpg25655-151101-1-PB.pdf.jpgGenerated Thumbnailimage/jpeg8933https://repositorio.unal.edu.co/bitstream/unal/37680/4/25655-151101-1-PB.pdf.jpg9386088e03b9129f98145e0d3876a39aMD54unal/37680oai:repositorio.unal.edu.co:unal/376802024-01-11 23:06:30.797Repositorio Institucional Universidad Nacional de Colombiarepositorio_nal@unal.edu.co
dc.title.spa.fl_str_mv Metallic cathode surface modification by using low pressure pulsed vacuum arc discharge
title Metallic cathode surface modification by using low pressure pulsed vacuum arc discharge
spellingShingle Metallic cathode surface modification by using low pressure pulsed vacuum arc discharge
Morphology
Spots
Arc voltage
Metallic cathodes
title_short Metallic cathode surface modification by using low pressure pulsed vacuum arc discharge
title_full Metallic cathode surface modification by using low pressure pulsed vacuum arc discharge
title_fullStr Metallic cathode surface modification by using low pressure pulsed vacuum arc discharge
title_full_unstemmed Metallic cathode surface modification by using low pressure pulsed vacuum arc discharge
title_sort Metallic cathode surface modification by using low pressure pulsed vacuum arc discharge
dc.creator.fl_str_mv Retrepo Parra, Elisabeth
García García, Luis Alpidio
Escobar Rincón, Daniel
De la roche Yepes, Jhonattan
Arango Arango, Pedro José
dc.contributor.author.spa.fl_str_mv Retrepo Parra, Elisabeth
García García, Luis Alpidio
Escobar Rincón, Daniel
De la roche Yepes, Jhonattan
Arango Arango, Pedro José
dc.subject.proposal.spa.fl_str_mv Morphology
Spots
Arc voltage
Metallic cathodes
topic Morphology
Spots
Arc voltage
Metallic cathodes
description Electrical discharges in a pulsed vacuum arc system at low pressure were produced using a peak current of 100A with pulses of 30 ms. Discharges were carried out applying a voltage of 104 V between the electrodes. Materials used as cathode were Ti, Zr, Ni, Cu, Mo and W. The cathodes morphology after the discharge production was studied using the scanning electron microscopy (SEM) technique. Ti and Zr presented the highest erosion. Moreover, circular craters on Ni and Mo cathodes were observed and a region of the Zr cathode, with high erosion and great quantity of craters was analyzed. The discharge voltage for each material was measured, obtaining arc voltage values. Finally, relationships between arc voltages and some material characteristics as melting point and boiling point were observed, presenting an exponential tendency.
publishDate 2012
dc.date.issued.spa.fl_str_mv 2012
dc.date.accessioned.spa.fl_str_mv 2019-06-28T01:55:12Z
dc.date.available.spa.fl_str_mv 2019-06-28T01:55:12Z
dc.type.spa.fl_str_mv Artículo de revista
dc.type.coar.fl_str_mv http://purl.org/coar/resource_type/c_2df8fbb1
dc.type.driver.spa.fl_str_mv info:eu-repo/semantics/article
dc.type.version.spa.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.coar.spa.fl_str_mv http://purl.org/coar/resource_type/c_6501
dc.type.coarversion.spa.fl_str_mv http://purl.org/coar/version/c_970fb48d4fbd8a85
dc.type.content.spa.fl_str_mv Text
dc.type.redcol.spa.fl_str_mv http://purl.org/redcol/resource_type/ART
format http://purl.org/coar/resource_type/c_6501
status_str publishedVersion
dc.identifier.uri.none.fl_str_mv https://repositorio.unal.edu.co/handle/unal/37680
dc.identifier.eprints.spa.fl_str_mv http://bdigital.unal.edu.co/27764/
url https://repositorio.unal.edu.co/handle/unal/37680
http://bdigital.unal.edu.co/27764/
dc.language.iso.spa.fl_str_mv spa
language spa
dc.relation.spa.fl_str_mv http://revistas.unal.edu.co/index.php/dyna/article/view/25655
dc.relation.ispartof.spa.fl_str_mv Universidad Nacional de Colombia Revistas electrónicas UN Dyna
Dyna
dc.relation.ispartofseries.none.fl_str_mv Dyna; Vol. 79, núm. 176 (2012); 90-98 DYNA; Vol. 79, núm. 176 (2012); 90-98 2346-2183 0012-7353
dc.relation.references.spa.fl_str_mv Retrepo Parra, Elisabeth and García García, Luis Alpidio and Escobar Rincón, Daniel and De la roche Yepes, Jhonattan and Arango Arango, Pedro José (2012) Metallic cathode surface modification by using low pressure pulsed vacuum arc discharge. Dyna; Vol. 79, núm. 176 (2012); 90-98 DYNA; Vol. 79, núm. 176 (2012); 90-98 2346-2183 0012-7353 .
dc.rights.spa.fl_str_mv Derechos reservados - Universidad Nacional de Colombia
dc.rights.coar.fl_str_mv http://purl.org/coar/access_right/c_abf2
dc.rights.license.spa.fl_str_mv Atribución-NoComercial 4.0 Internacional
dc.rights.uri.spa.fl_str_mv http://creativecommons.org/licenses/by-nc/4.0/
dc.rights.accessrights.spa.fl_str_mv info:eu-repo/semantics/openAccess
rights_invalid_str_mv Atribución-NoComercial 4.0 Internacional
Derechos reservados - Universidad Nacional de Colombia
http://creativecommons.org/licenses/by-nc/4.0/
http://purl.org/coar/access_right/c_abf2
eu_rights_str_mv openAccess
dc.format.mimetype.spa.fl_str_mv application/pdf
dc.publisher.spa.fl_str_mv Universidad Nacional de Colombia Sede Medellín
institution Universidad Nacional de Colombia
bitstream.url.fl_str_mv https://repositorio.unal.edu.co/bitstream/unal/37680/1/25655-151101-1-PB.pdf
https://repositorio.unal.edu.co/bitstream/unal/37680/2/25655-191454-1-PB.html
https://repositorio.unal.edu.co/bitstream/unal/37680/3/25655-89999-1-SP.doc
https://repositorio.unal.edu.co/bitstream/unal/37680/4/25655-151101-1-PB.pdf.jpg
bitstream.checksum.fl_str_mv 46d2fd6dffae151a28ab817eeabfd43d
d0b89235d474b7aafa5c58ada4b33255
be01d27b3798cd23705b50c1e79eab59
9386088e03b9129f98145e0d3876a39a
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
MD5
MD5
repository.name.fl_str_mv Repositorio Institucional Universidad Nacional de Colombia
repository.mail.fl_str_mv repositorio_nal@unal.edu.co
_version_ 1814089735422869504