Electrical Performance of Distribution Insulators with Chlorella vulgaris Growth on its Surface

This paper presents a study about electrical performance of ceramic and polymeric insulators bio-contaminated with alga Chlorella vulgaris. The performed tests involve ANSI 55-2 and ANSI 52-1 ceramic insulators and ANSI DS-15 polymeric insulators, all of them used in distribution systems of Colombia...

Full description

Autores:
Rojas-Cubides, Herbert Enrique
Pérez, Carlos Daniel
León, Andrés Felipe
Cantor, Luis Felipe
Tipo de recurso:
Article of journal
Fecha de publicación:
2015
Institución:
Universidad Nacional de Colombia
Repositorio:
Universidad Nacional de Colombia
Idioma:
spa
OAI Identifier:
oai:repositorio.unal.edu.co:unal/67655
Acceso en línea:
https://repositorio.unal.edu.co/handle/unal/67655
http://bdigital.unal.edu.co/68684/
Palabra clave:
62 Ingeniería y operaciones afines / Engineering
Algae
biological contamination
chlorella vulgaris
distribution insulators
flashover voltage
leakage current.
Algas
aisladores de distribución
chlorella vulgaris
contaminación biológica
corriente de fuga
tensión de flameo.
Rights
openAccess
License
Atribución-NoComercial 4.0 Internacional
Description
Summary:This paper presents a study about electrical performance of ceramic and polymeric insulators bio-contaminated with alga Chlorella vulgaris. The performed tests involve ANSI 55-2 and ANSI 52-1 ceramic insulators and ANSI DS-15 polymeric insulators, all of them used in distribution systems of Colombia. Biological contamination of insulators is realized using a controlled environment chamber that adjusts the temperature, humidity and light radiation. The laboratory tests include measurements of flashover voltages and leakage currents and they were performed to determine how insulators are affected by biological contamination. After a series of laboratory tests, it was concluded that the presence of Chlorella vulgaris on the contaminated ceramic insulators reduces the wet flashover voltage up to 12% and increases their leakage currents up to 80%. On the other hand, for polymeric insulators the effect of algae growth on flashover voltages was not to strong, although the leakage currents increase up to 60%.