Development of a welding procedure for mil a 46100 armor steel joints using gas metal arc welding

A welding procedure (WPS) for MIL A46100 steel armor joints using the gas metal arc welding process (GMAW) was developed and qualified according to mechanical and non-destructive (NDT) requirements of military codes. Obtained results were compared to shielded metal arc welding (SMAW) procedures used to weld this type of steel. It was found that designed WPS is a suitable option to weld MIL A46100 armors according to the results obtained. In addition, a narrower heat affected zone (HAZ) was obtained with designed WPS which should lead to a better in-service armor performance according to results of previous studies. Finally, an increase in Charpy v-notch (CVN) test impact energy compared to the SMAW procedure was found.

• Autores: Mazuera Robledo, David; Suárez Gómez, John Alberto; Giraldo-Barrada, Jorge Enrique
• Tipo de recurso: Article of journal
• Fecha de publicación: 2011
• Institución: Universidad Nacional de Colombia
• Repositorio: Universidad Nacional de Colombia
• Idioma: spa
• OAI Identifier: oai:repositorio.unal.edu.co:unal/37992
• Acceso en línea: https://repositorio.unal.edu.co/handle/unal/37992; http://bdigital.unal.edu.co/28077/
• Palabra clave: Gas metal arc welding (GMAW); welding procedure specification (WPS); MIL A 46100 armor steel
• Rights: openAccess
• License: Atribución-NoComercial 4.0 Internacional