Mechanical properties comparison of friction stir welding butt joints of aa1100 made in a conventional milling machine and a fsw machine

In this work, the mechanical properties of butt joints of AA1100 Aluminum alloy obtained through FSW in a conventionalmilling machine and a friction stir welding machine were compared. The joints were obtained using the same tool geometry and weldingparameters. The milling machine was adapted to ensure position control during the welding process and the friction stir welding machinewas operated under force and position control modes.Mechanical properties of the beads were evaluated through tensile tests and microhardness measurements. Defects generated inthe joints were analyzed using optical and scanning electron microscopy. Results showed that mechanical properties were stronglyaffected by the welding parameters, whereas the kind of machine infl uenced the presence of defects in the joints. It was found thatthe tensile properties were more appropriate to compare the results between sets of parameters and level of defects than the hardnesstest. Higher mechanical properties and a lower level of defects were obtained in the FSW machine by position control mode, withtensile strength around 130MPa, whereas the highest tensile strength obtained in the conventional milling machine was 109 MPa.

• Autores: Zapata Sánchez, Julio César; Valderrama, Julian; Hoyos Pulgarín, Elizabeth; López Ochoa, Diana María
• Tipo de recurso: Article of journal
• Fecha de publicación: 2013
• Institución: Universidad Nacional de Colombia
• Repositorio: Universidad Nacional de Colombia
• Idioma: spa
• OAI Identifier: oai:repositorio.unal.edu.co:unal/40691
• Acceso en línea: https://repositorio.unal.edu.co/handle/unal/40691; http://bdigital.unal.edu.co/30788/
• Palabra clave: FSW; mechanical properties; AA1100; adapted FSW machine
• Rights: openAccess
• License: Atribución-NoComercial 4.0 Internacional