Diseño y construcción de un prototipo de un medidor de resistividad del suelo para el laboratorio de corrosión de la escuela de ingeniería metalúrgica
This paper describes the design process of a soil resistivity meter (MRS), capable of performing useful field measurements in the corrosion laboratory of the School of Metallurgical Engineering and Materials Science. During this process, three prototypes were developed that led to the proposed final...
- Autores:
- Tipo de recurso:
- Fecha de publicación:
- 2003
- Institución:
- Universidad Industrial de Santander
- Repositorio:
- Repositorio UIS
- Idioma:
- spa
- OAI Identifier:
- oai:noesis.uis.edu.co:20.500.14071/8185
- Acceso en línea:
- https://revistas.uis.edu.co/index.php/revistauisingenierias/article/view/2315
https://noesis.uis.edu.co/handle/20.500.14071/8185
- Palabra clave:
- Tellurial Currents
corrosion
microconverter
profiling
resistivity
telurometer
Corrientes Telúricas
corrosión
microconvertidor
perfilaje
resistividad
telurómetro
- Rights
- openAccess
- License
- Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
Summary: | This paper describes the design process of a soil resistivity meter (MRS), capable of performing useful field measurements in the corrosion laboratory of the School of Metallurgical Engineering and Materials Science. During this process, three prototypes were developed that led to the proposed final design. For this purpose a chopper-lift configuration was implemented in order to provide adequate power levels to perform a resistance measurement, which has its respective protection system And an acquisition and control system implemented with Analog Devices ADuC832 Microconverter. These prototypes allowed to analyze the scope of the project and characterize the final design. Based on preliminary tests conducted on different types of terrain and different locations in the metropolitan area, with a university-owned tellurometer. The MRS has the capacity to store 20 tests, a user interface, which allows for the test configuration and application software in LabVIEW that allows interconnection with a PC for the serial download of the data, the subsequent representation Of the same, graphing the respective Resistivity Profiling, and approximate the tendency of the curve to variations of humidity and temperature by means of the empirical relation of Albrecht |
---|