Método para la localización de fallas de red a partir de la instalación de medidores inteligentes en los sistemas eléctricos de distribución
Debido a la constante demanda de energía eléctrica en el territorio colombiano, es de vital importancia mantener la supervisión del flujo de energía eléctrica y es por esta razón que es necesario el estudio de los diferentes tipos de fallas de red y sus impactos en los sistemas de distribución. Los...
- Autores:
-
Garrido Garcia, Jorge Eliecer
Ardila Sanchez, Nelson Enrique
- Tipo de recurso:
- http://purl.org/coar/version/c_b1a7d7d4d402bcce
- Fecha de publicación:
- 2016
- Institución:
- Universidad Industrial de Santander
- Repositorio:
- Repositorio UIS
- Idioma:
- spa
- OAI Identifier:
- oai:noesis.uis.edu.co:20.500.14071/35342
- Palabra clave:
- Localización De Fallas
Sistemas De Distribución
Medidores Inteligentes.
Due to constant in Colombia energy demand it is of vital importance to maintain the flow of electrical energy monitoring
is for this reason that the study of different types of failure in systems of distribution and its estimated location is necessary. Power flows in distribution systems should be handled adequate capacity to prevent overloading of the elements. By monitoring an electrical system can analyze flows and accommodate them anticipating possible failures. Addition the detection and network fault location it is important to ensure the reliability of electricity supply
a task in which the novel monitoring systems have begun to take a major boom This research project aims to implement a method for locating faults in distribution systems by including smart meters in the grid. An important aspect to highlight is that in the development of the proposed method are used only monitors voltage. For developing the project
a first stage of literature review is carried out in the technical literature
identifying methods for fault locating incorporating the structure of an intelligent
distributed
subsequent measurement to it we proceed to testing to verify operation proposed and to generate the respective conclusions method according to its effectiveness when fault identification The method proposed in this paper can induce more precise results; by consistent
identification of the bar where the failure occurs through the relative estimation of fault currents is achieved.
- Rights
- License
- Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
id |
UISANTADR2_ccb76de771feb08e36cf79f80a736a39 |
---|---|
oai_identifier_str |
oai:noesis.uis.edu.co:20.500.14071/35342 |
network_acronym_str |
UISANTADR2 |
network_name_str |
Repositorio UIS |
repository_id_str |
|
dc.title.none.fl_str_mv |
Método para la localización de fallas de red a partir de la instalación de medidores inteligentes en los sistemas eléctricos de distribución |
dc.title.english.none.fl_str_mv |
Fault Location, Power Distribution, Smart Feeder Meter, Voltage Measurement |
title |
Método para la localización de fallas de red a partir de la instalación de medidores inteligentes en los sistemas eléctricos de distribución |
spellingShingle |
Método para la localización de fallas de red a partir de la instalación de medidores inteligentes en los sistemas eléctricos de distribución Localización De Fallas Sistemas De Distribución Medidores Inteligentes. Due to constant in Colombia energy demand it is of vital importance to maintain the flow of electrical energy monitoring is for this reason that the study of different types of failure in systems of distribution and its estimated location is necessary. Power flows in distribution systems should be handled adequate capacity to prevent overloading of the elements. By monitoring an electrical system can analyze flows and accommodate them anticipating possible failures. Addition the detection and network fault location it is important to ensure the reliability of electricity supply a task in which the novel monitoring systems have begun to take a major boom This research project aims to implement a method for locating faults in distribution systems by including smart meters in the grid. An important aspect to highlight is that in the development of the proposed method are used only monitors voltage. For developing the project a first stage of literature review is carried out in the technical literature identifying methods for fault locating incorporating the structure of an intelligent distributed subsequent measurement to it we proceed to testing to verify operation proposed and to generate the respective conclusions method according to its effectiveness when fault identification The method proposed in this paper can induce more precise results; by consistent identification of the bar where the failure occurs through the relative estimation of fault currents is achieved. |
title_short |
Método para la localización de fallas de red a partir de la instalación de medidores inteligentes en los sistemas eléctricos de distribución |
title_full |
Método para la localización de fallas de red a partir de la instalación de medidores inteligentes en los sistemas eléctricos de distribución |
title_fullStr |
Método para la localización de fallas de red a partir de la instalación de medidores inteligentes en los sistemas eléctricos de distribución |
title_full_unstemmed |
Método para la localización de fallas de red a partir de la instalación de medidores inteligentes en los sistemas eléctricos de distribución |
title_sort |
Método para la localización de fallas de red a partir de la instalación de medidores inteligentes en los sistemas eléctricos de distribución |
dc.creator.fl_str_mv |
Garrido Garcia, Jorge Eliecer Ardila Sanchez, Nelson Enrique |
dc.contributor.advisor.none.fl_str_mv |
Blanco Solano, Jairo Ordóñez Plata, Gabriel |
dc.contributor.author.none.fl_str_mv |
Garrido Garcia, Jorge Eliecer Ardila Sanchez, Nelson Enrique |
dc.subject.none.fl_str_mv |
Localización De Fallas Sistemas De Distribución Medidores Inteligentes. |
topic |
Localización De Fallas Sistemas De Distribución Medidores Inteligentes. Due to constant in Colombia energy demand it is of vital importance to maintain the flow of electrical energy monitoring is for this reason that the study of different types of failure in systems of distribution and its estimated location is necessary. Power flows in distribution systems should be handled adequate capacity to prevent overloading of the elements. By monitoring an electrical system can analyze flows and accommodate them anticipating possible failures. Addition the detection and network fault location it is important to ensure the reliability of electricity supply a task in which the novel monitoring systems have begun to take a major boom This research project aims to implement a method for locating faults in distribution systems by including smart meters in the grid. An important aspect to highlight is that in the development of the proposed method are used only monitors voltage. For developing the project a first stage of literature review is carried out in the technical literature identifying methods for fault locating incorporating the structure of an intelligent distributed subsequent measurement to it we proceed to testing to verify operation proposed and to generate the respective conclusions method according to its effectiveness when fault identification The method proposed in this paper can induce more precise results; by consistent identification of the bar where the failure occurs through the relative estimation of fault currents is achieved. |
dc.subject.keyword.none.fl_str_mv |
Due to constant in Colombia energy demand it is of vital importance to maintain the flow of electrical energy monitoring is for this reason that the study of different types of failure in systems of distribution and its estimated location is necessary. Power flows in distribution systems should be handled adequate capacity to prevent overloading of the elements. By monitoring an electrical system can analyze flows and accommodate them anticipating possible failures. Addition the detection and network fault location it is important to ensure the reliability of electricity supply a task in which the novel monitoring systems have begun to take a major boom This research project aims to implement a method for locating faults in distribution systems by including smart meters in the grid. An important aspect to highlight is that in the development of the proposed method are used only monitors voltage. For developing the project a first stage of literature review is carried out in the technical literature identifying methods for fault locating incorporating the structure of an intelligent distributed subsequent measurement to it we proceed to testing to verify operation proposed and to generate the respective conclusions method according to its effectiveness when fault identification The method proposed in this paper can induce more precise results; by consistent identification of the bar where the failure occurs through the relative estimation of fault currents is achieved. |
description |
Debido a la constante demanda de energía eléctrica en el territorio colombiano, es de vital importancia mantener la supervisión del flujo de energía eléctrica y es por esta razón que es necesario el estudio de los diferentes tipos de fallas de red y sus impactos en los sistemas de distribución. Los flujos de potencia en los sistemas de distribución se deben manejar a una capacidad adecuada para evitar la sobrecarga de los elementos. Mediante el monitoreo de un sistema eléctrico es posible analizar sus flujos y ajustar los mismos previendo las posibles fallas. Además, la detección y localización de fallas de red resulta importante para garantizar la confiabilidad del suministro de energía eléctrica, tarea en la cual los novedosos sistemas de monitorización han empezado a tomar un auge importante. El presente proyecto de investigación tiene como objetivo la implementación de un método para la localización de fallas en los sistemas de distribución mediante la inclusión de medidores inteligentes en la red eléctrica. Un aspecto importante por resaltar es que, en el desarrollo del método propuesto, solo son utilizados monitores de tensión. Para el desarrollo del proyecto se realiza una primera etapa de revisión bibliográfica en la literatura técnica, identificando métodos para la localización de fallas que incorporen la estructura de una medición inteligente y distribuida, posterior a ello se procede a la realización de pruebas para verificar el funcionamiento del método propuesto y generar las respectivas conclusiones, de acuerdo a su efectividad a la hora de la localización relativa de las fallas de red. El método propuesto en este documento permite inducir resultados más exactos, por consecuente, se logra la identificación del segmento de línea ubicado entre dos nodos, donde se presenta la falla, mediante la estimación relativa de corrientes de falla. |
publishDate |
2016 |
dc.date.available.none.fl_str_mv |
2016 2024-03-03T22:47:22Z |
dc.date.created.none.fl_str_mv |
2016 |
dc.date.issued.none.fl_str_mv |
2016 |
dc.date.accessioned.none.fl_str_mv |
2024-03-03T22:47:22Z |
dc.type.local.none.fl_str_mv |
Tesis/Trabajo de grado - Monografía - Pregrado |
dc.type.hasversion.none.fl_str_mv |
http://purl.org/coar/resource_type/c_7a1f |
dc.type.coar.none.fl_str_mv |
http://purl.org/coar/version/c_b1a7d7d4d402bcce |
format |
http://purl.org/coar/version/c_b1a7d7d4d402bcce |
dc.identifier.uri.none.fl_str_mv |
https://noesis.uis.edu.co/handle/20.500.14071/35342 |
dc.identifier.instname.none.fl_str_mv |
Universidad Industrial de Santander |
dc.identifier.reponame.none.fl_str_mv |
Universidad Industrial de Santander |
dc.identifier.repourl.none.fl_str_mv |
https://noesis.uis.edu.co |
url |
https://noesis.uis.edu.co/handle/20.500.14071/35342 https://noesis.uis.edu.co |
identifier_str_mv |
Universidad Industrial de Santander |
dc.language.iso.none.fl_str_mv |
spa |
language |
spa |
dc.rights.none.fl_str_mv |
http://creativecommons.org/licenses/by/4.0/ |
dc.rights.coar.fl_str_mv |
http://purl.org/coar/access_right/c_abf2 |
dc.rights.license.none.fl_str_mv |
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) |
dc.rights.uri.none.fl_str_mv |
http://creativecommons.org/licenses/by-nc/4.0 |
dc.rights.creativecommons.none.fl_str_mv |
Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) |
rights_invalid_str_mv |
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) http://creativecommons.org/licenses/by/4.0/ http://creativecommons.org/licenses/by-nc/4.0 Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) http://purl.org/coar/access_right/c_abf2 |
dc.format.mimetype.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidad Industrial de Santander |
dc.publisher.faculty.none.fl_str_mv |
Facultad de Ingenierías Fisicomecánicas |
dc.publisher.program.none.fl_str_mv |
Ingeniería Eléctrica |
dc.publisher.school.none.fl_str_mv |
Escuela de Ingenierías Eléctrica, Electrónica y Telecomunicaciones |
publisher.none.fl_str_mv |
Universidad Industrial de Santander |
institution |
Universidad Industrial de Santander |
bitstream.url.fl_str_mv |
https://noesis.uis.edu.co/bitstreams/545e7ae9-d49c-44dd-921d-96ad7fb23369/download https://noesis.uis.edu.co/bitstreams/2f404dce-c609-4c1b-97c6-20a2c5ec2929/download https://noesis.uis.edu.co/bitstreams/0e543dee-03b7-462e-92b6-99b9e9c6e5cd/download |
bitstream.checksum.fl_str_mv |
08ba2ec330b9e7556c8038d6160e0def 4f0a6b148bf5db41a467a2b0ff24c371 5a44f52932b2de959703c3dfc9a5a14b |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
DSpace at UIS |
repository.mail.fl_str_mv |
noesis@uis.edu.co |
_version_ |
1812187052596264960 |
spelling |
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)http://creativecommons.org/licenses/by/4.0/http://creativecommons.org/licenses/by-nc/4.0Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)http://purl.org/coar/access_right/c_abf2Blanco Solano, JairoOrdóñez Plata, GabrielGarrido Garcia, Jorge EliecerArdila Sanchez, Nelson Enrique2024-03-03T22:47:22Z20162024-03-03T22:47:22Z20162016https://noesis.uis.edu.co/handle/20.500.14071/35342Universidad Industrial de SantanderUniversidad Industrial de Santanderhttps://noesis.uis.edu.coDebido a la constante demanda de energía eléctrica en el territorio colombiano, es de vital importancia mantener la supervisión del flujo de energía eléctrica y es por esta razón que es necesario el estudio de los diferentes tipos de fallas de red y sus impactos en los sistemas de distribución. Los flujos de potencia en los sistemas de distribución se deben manejar a una capacidad adecuada para evitar la sobrecarga de los elementos. Mediante el monitoreo de un sistema eléctrico es posible analizar sus flujos y ajustar los mismos previendo las posibles fallas. Además, la detección y localización de fallas de red resulta importante para garantizar la confiabilidad del suministro de energía eléctrica, tarea en la cual los novedosos sistemas de monitorización han empezado a tomar un auge importante. El presente proyecto de investigación tiene como objetivo la implementación de un método para la localización de fallas en los sistemas de distribución mediante la inclusión de medidores inteligentes en la red eléctrica. Un aspecto importante por resaltar es que, en el desarrollo del método propuesto, solo son utilizados monitores de tensión. Para el desarrollo del proyecto se realiza una primera etapa de revisión bibliográfica en la literatura técnica, identificando métodos para la localización de fallas que incorporen la estructura de una medición inteligente y distribuida, posterior a ello se procede a la realización de pruebas para verificar el funcionamiento del método propuesto y generar las respectivas conclusiones, de acuerdo a su efectividad a la hora de la localización relativa de las fallas de red. El método propuesto en este documento permite inducir resultados más exactos, por consecuente, se logra la identificación del segmento de línea ubicado entre dos nodos, donde se presenta la falla, mediante la estimación relativa de corrientes de falla.PregradoIngeniero ElectricistaNetwork fault location method based on smart feeder meter installation in electric distribution systems.application/pdfspaUniversidad Industrial de SantanderFacultad de Ingenierías FisicomecánicasIngeniería EléctricaEscuela de Ingenierías Eléctrica, Electrónica y TelecomunicacionesLocalización De FallasSistemas De DistribuciónMedidores Inteligentes.Due to constant in Colombia energy demand it is of vital importance to maintain the flow of electrical energy monitoringis for this reason that the study of different types of failure in systems of distribution and its estimated location is necessary. Power flows in distribution systems should be handled adequate capacity to prevent overloading of the elements. By monitoring an electrical system can analyze flows and accommodate them anticipating possible failures. Addition the detection and network fault location it is important to ensure the reliability of electricity supplya task in which the novel monitoring systems have begun to take a major boom This research project aims to implement a method for locating faults in distribution systems by including smart meters in the grid. An important aspect to highlight is that in the development of the proposed method are used only monitors voltage. For developing the projecta first stage of literature review is carried out in the technical literatureidentifying methods for fault locating incorporating the structure of an intelligentdistributedsubsequent measurement to it we proceed to testing to verify operation proposed and to generate the respective conclusions method according to its effectiveness when fault identification The method proposed in this paper can induce more precise results; by consistentidentification of the bar where the failure occurs through the relative estimation of fault currents is achieved.Método para la localización de fallas de red a partir de la instalación de medidores inteligentes en los sistemas eléctricos de distribuciónFault Location, Power Distribution, Smart Feeder Meter, Voltage MeasurementTesis/Trabajo de grado - Monografía - Pregradohttp://purl.org/coar/resource_type/c_7a1fhttp://purl.org/coar/version/c_b1a7d7d4d402bcceORIGINALCarta de autorización.pdfapplication/pdf863788https://noesis.uis.edu.co/bitstreams/545e7ae9-d49c-44dd-921d-96ad7fb23369/download08ba2ec330b9e7556c8038d6160e0defMD51Documento.pdfapplication/pdf27524659https://noesis.uis.edu.co/bitstreams/2f404dce-c609-4c1b-97c6-20a2c5ec2929/download4f0a6b148bf5db41a467a2b0ff24c371MD52Nota de proyecto.pdfapplication/pdf216951https://noesis.uis.edu.co/bitstreams/0e543dee-03b7-462e-92b6-99b9e9c6e5cd/download5a44f52932b2de959703c3dfc9a5a14bMD5320.500.14071/35342oai:noesis.uis.edu.co:20.500.14071/353422024-03-03 17:47:22.669http://creativecommons.org/licenses/by-nc/4.0http://creativecommons.org/licenses/by/4.0/open.accesshttps://noesis.uis.edu.coDSpace at UISnoesis@uis.edu.co |