Práctica empresarial como auxiliar de diseño hidrosanitario aplicando el software Cypecad 2015
En las últimas décadas el diseño hidrosanitario se ha consolidado como un área de gran importancia e incipiente crecimiento con alta demanda dentro la ingeniería civil. Así, se ha requerido una amplia destreza en optimización de los procedimientos y diseños con el fin proporcionar mayor eficiencia e...
- Autores:
-
Torres Prada, Christian Julian
- Tipo de recurso:
- http://purl.org/coar/version/c_b1a7d7d4d402bcce
- Fecha de publicación:
- 2016
- Institución:
- Universidad Industrial de Santander
- Repositorio:
- Repositorio UIS
- Idioma:
- spa
- OAI Identifier:
- oai:noesis.uis.edu.co:20.500.14071/33944
- Palabra clave:
- Diseño Hidrosanitario
Cypecad 2015
Software
Modelamiento Hidrosanitario.
In the last decades the design hydro-sanitary has been consolidated as an area of great importance and incipient growth by discharge demands inside the civil engineering. This way
a wide skill has been needed in optimization of the procedures and designs by the purpose to provide major efficiency in the results and final designs
this has been facilitated thanks to the joint of computational key tools in the organization
modeling and calculation of structures and networks; in this case hydro-sanitary
such it is the case of software as CYPECAD 2015 used in the construction of buildings and the design of hydro-sanitary networks. The hydro-sanitary design has gone from being an area of little importance to one of the disciplines in engineering which has begun to have more detail and has been paid more attention. In particular the area of plumbing engineering is governed Colombia from the "NTC 1500" (Colombian Technical Standard - Colombian Plumbing Code)
supplementary books as "Design of plumbing and gas innovation in optimizing plumbing designs and procedures
as is the case with software CYPECAD CYPECAD MEP (Electrical- Mechanical- Plumbing) extension whereby the calculation
dimensioning and testing of building installation is carried out in areas as fire
plumbing (hot water and cold water)
sanitation (rainwater and wastewater). On the other hand the application and managing of the above mentioned instruments must be under control of integral professionals who have a solid theoretical knowledge and an agile performance in field
there it is where the managerial practices acquire importance
giving to the student good aptitudes to complement the knowledge and the field experiences forging a more complete profile and that provides better quality in the professional performance
- Rights
- License
- Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
id |
UISANTADR2_5483c9ca1d112f089581372c28035958 |
---|---|
oai_identifier_str |
oai:noesis.uis.edu.co:20.500.14071/33944 |
network_acronym_str |
UISANTADR2 |
network_name_str |
Repositorio UIS |
repository_id_str |
|
dc.title.none.fl_str_mv |
Práctica empresarial como auxiliar de diseño hidrosanitario aplicando el software Cypecad 2015 |
dc.title.english.none.fl_str_mv |
Hydro- Sanitary Design, Cypecad 2015, Software, Hydro-Sanitary Modeling. |
title |
Práctica empresarial como auxiliar de diseño hidrosanitario aplicando el software Cypecad 2015 |
spellingShingle |
Práctica empresarial como auxiliar de diseño hidrosanitario aplicando el software Cypecad 2015 Diseño Hidrosanitario Cypecad 2015 Software Modelamiento Hidrosanitario. In the last decades the design hydro-sanitary has been consolidated as an area of great importance and incipient growth by discharge demands inside the civil engineering. This way a wide skill has been needed in optimization of the procedures and designs by the purpose to provide major efficiency in the results and final designs this has been facilitated thanks to the joint of computational key tools in the organization modeling and calculation of structures and networks; in this case hydro-sanitary such it is the case of software as CYPECAD 2015 used in the construction of buildings and the design of hydro-sanitary networks. The hydro-sanitary design has gone from being an area of little importance to one of the disciplines in engineering which has begun to have more detail and has been paid more attention. In particular the area of plumbing engineering is governed Colombia from the "NTC 1500" (Colombian Technical Standard - Colombian Plumbing Code) supplementary books as "Design of plumbing and gas innovation in optimizing plumbing designs and procedures as is the case with software CYPECAD CYPECAD MEP (Electrical- Mechanical- Plumbing) extension whereby the calculation dimensioning and testing of building installation is carried out in areas as fire plumbing (hot water and cold water) sanitation (rainwater and wastewater). On the other hand the application and managing of the above mentioned instruments must be under control of integral professionals who have a solid theoretical knowledge and an agile performance in field there it is where the managerial practices acquire importance giving to the student good aptitudes to complement the knowledge and the field experiences forging a more complete profile and that provides better quality in the professional performance |
title_short |
Práctica empresarial como auxiliar de diseño hidrosanitario aplicando el software Cypecad 2015 |
title_full |
Práctica empresarial como auxiliar de diseño hidrosanitario aplicando el software Cypecad 2015 |
title_fullStr |
Práctica empresarial como auxiliar de diseño hidrosanitario aplicando el software Cypecad 2015 |
title_full_unstemmed |
Práctica empresarial como auxiliar de diseño hidrosanitario aplicando el software Cypecad 2015 |
title_sort |
Práctica empresarial como auxiliar de diseño hidrosanitario aplicando el software Cypecad 2015 |
dc.creator.fl_str_mv |
Torres Prada, Christian Julian |
dc.contributor.advisor.none.fl_str_mv |
Almeyda Ortiz, Andres |
dc.contributor.author.none.fl_str_mv |
Torres Prada, Christian Julian |
dc.subject.none.fl_str_mv |
Diseño Hidrosanitario Cypecad 2015 Software Modelamiento Hidrosanitario. |
topic |
Diseño Hidrosanitario Cypecad 2015 Software Modelamiento Hidrosanitario. In the last decades the design hydro-sanitary has been consolidated as an area of great importance and incipient growth by discharge demands inside the civil engineering. This way a wide skill has been needed in optimization of the procedures and designs by the purpose to provide major efficiency in the results and final designs this has been facilitated thanks to the joint of computational key tools in the organization modeling and calculation of structures and networks; in this case hydro-sanitary such it is the case of software as CYPECAD 2015 used in the construction of buildings and the design of hydro-sanitary networks. The hydro-sanitary design has gone from being an area of little importance to one of the disciplines in engineering which has begun to have more detail and has been paid more attention. In particular the area of plumbing engineering is governed Colombia from the "NTC 1500" (Colombian Technical Standard - Colombian Plumbing Code) supplementary books as "Design of plumbing and gas innovation in optimizing plumbing designs and procedures as is the case with software CYPECAD CYPECAD MEP (Electrical- Mechanical- Plumbing) extension whereby the calculation dimensioning and testing of building installation is carried out in areas as fire plumbing (hot water and cold water) sanitation (rainwater and wastewater). On the other hand the application and managing of the above mentioned instruments must be under control of integral professionals who have a solid theoretical knowledge and an agile performance in field there it is where the managerial practices acquire importance giving to the student good aptitudes to complement the knowledge and the field experiences forging a more complete profile and that provides better quality in the professional performance |
dc.subject.keyword.none.fl_str_mv |
In the last decades the design hydro-sanitary has been consolidated as an area of great importance and incipient growth by discharge demands inside the civil engineering. This way a wide skill has been needed in optimization of the procedures and designs by the purpose to provide major efficiency in the results and final designs this has been facilitated thanks to the joint of computational key tools in the organization modeling and calculation of structures and networks; in this case hydro-sanitary such it is the case of software as CYPECAD 2015 used in the construction of buildings and the design of hydro-sanitary networks. The hydro-sanitary design has gone from being an area of little importance to one of the disciplines in engineering which has begun to have more detail and has been paid more attention. In particular the area of plumbing engineering is governed Colombia from the "NTC 1500" (Colombian Technical Standard - Colombian Plumbing Code) supplementary books as "Design of plumbing and gas innovation in optimizing plumbing designs and procedures as is the case with software CYPECAD CYPECAD MEP (Electrical- Mechanical- Plumbing) extension whereby the calculation dimensioning and testing of building installation is carried out in areas as fire plumbing (hot water and cold water) sanitation (rainwater and wastewater). On the other hand the application and managing of the above mentioned instruments must be under control of integral professionals who have a solid theoretical knowledge and an agile performance in field there it is where the managerial practices acquire importance giving to the student good aptitudes to complement the knowledge and the field experiences forging a more complete profile and that provides better quality in the professional performance |
description |
En las últimas décadas el diseño hidrosanitario se ha consolidado como un área de gran importancia e incipiente crecimiento con alta demanda dentro la ingeniería civil. Así, se ha requerido una amplia destreza en optimización de los procedimientos y diseños con el fin proporcionar mayor eficiencia en los resultados y diseños finales, esto se ha facilitado gracias a la articulación de herramientas computacionales clave en la organización, modelamiento y cálculo de estructuras y redes; en este caso hidrosanitarias, tal es el caso de software como CYPECAD 2015, utilizado en la construcción de edificaciones y el diseño de redes hidrosanitarias. El diseño hidrosanitario ha pasado de ser un área de poca importancia a una de las disciplinas en ingeniería en la cual se ha comenzado a tener mayor detalle y se le ha prestado mayor atención. En particular el área de ingeniería hidrosanitaria en Colombia se rige a partir de la TECNICA COLOMBIANA Código colombiano de fontanería), libros complementarios como ón de los diseños y procedimientos hidrosanitarios, tal es el caso del software CYPECAD con la extensión CYPECAD MEP (Mechanical- Electrical- Plumbing) mediante el cual se realiza el cálculo, dimensionamiento y comprobación de instalaciones de edificios en aspectos como: incendio, fontanería (agua caliente y agua fría), saneamiento (aguas pluviales y aguas negras). Por otro lado la aplicación y manejo de dichos instrumentos debe estar bajo control de profesionales integrales que tengan un sólido conocimiento teórico y un ágil desempeño en campo, ahí es donde las prácticas empresariales adquieren importancia, confiriendo al estudiante buenas capacidades para complementar los conocimientos y las experiencias de campo forjando un perfil más completo y que provea mejor calidad en el desempeño profesional. |
publishDate |
2016 |
dc.date.available.none.fl_str_mv |
2016 2024-03-03T22:32:26Z |
dc.date.created.none.fl_str_mv |
2016 |
dc.date.issued.none.fl_str_mv |
2016 |
dc.date.accessioned.none.fl_str_mv |
2024-03-03T22:32:26Z |
dc.type.local.none.fl_str_mv |
Tesis/Trabajo de grado - Monografía - Pregrado |
dc.type.hasversion.none.fl_str_mv |
http://purl.org/coar/resource_type/c_7a1f |
dc.type.coar.none.fl_str_mv |
http://purl.org/coar/version/c_b1a7d7d4d402bcce |
format |
http://purl.org/coar/version/c_b1a7d7d4d402bcce |
dc.identifier.uri.none.fl_str_mv |
https://noesis.uis.edu.co/handle/20.500.14071/33944 |
dc.identifier.instname.none.fl_str_mv |
Universidad Industrial de Santander |
dc.identifier.reponame.none.fl_str_mv |
Universidad Industrial de Santander |
dc.identifier.repourl.none.fl_str_mv |
https://noesis.uis.edu.co |
url |
https://noesis.uis.edu.co/handle/20.500.14071/33944 https://noesis.uis.edu.co |
identifier_str_mv |
Universidad Industrial de Santander |
dc.language.iso.none.fl_str_mv |
spa |
language |
spa |
dc.rights.none.fl_str_mv |
http://creativecommons.org/licenses/by/4.0/ |
dc.rights.coar.fl_str_mv |
http://purl.org/coar/access_right/c_abf2 |
dc.rights.license.none.fl_str_mv |
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) |
dc.rights.uri.none.fl_str_mv |
http://creativecommons.org/licenses/by-nc/4.0 |
dc.rights.creativecommons.none.fl_str_mv |
Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) |
rights_invalid_str_mv |
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) http://creativecommons.org/licenses/by/4.0/ http://creativecommons.org/licenses/by-nc/4.0 Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) http://purl.org/coar/access_right/c_abf2 |
dc.format.mimetype.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidad Industrial de Santander |
dc.publisher.faculty.none.fl_str_mv |
Facultad de Ingenierías Fisicomecánicas |
dc.publisher.program.none.fl_str_mv |
Ingeniería Civil |
dc.publisher.school.none.fl_str_mv |
Escuela de Ingeniería Civil |
publisher.none.fl_str_mv |
Universidad Industrial de Santander |
institution |
Universidad Industrial de Santander |
bitstream.url.fl_str_mv |
https://noesis.uis.edu.co/bitstreams/63f0669d-1bbb-48e7-9cd7-f456b1e92ee7/download https://noesis.uis.edu.co/bitstreams/17c9338d-9a5d-40e3-aea3-b0a9bb8306b3/download https://noesis.uis.edu.co/bitstreams/882e0598-e56e-4b2d-abf4-f2bf9cd2e647/download |
bitstream.checksum.fl_str_mv |
d88cafcae9ede83f99c0c7e6c9ff20c3 56cbd33bb60bc3b26413a8d3c5dee103 162706a8e7f2c98c342fe4918196a142 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
DSpace at UIS |
repository.mail.fl_str_mv |
noesis@uis.edu.co |
_version_ |
1812187056452927488 |
spelling |
Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)http://creativecommons.org/licenses/by/4.0/http://creativecommons.org/licenses/by-nc/4.0Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)http://purl.org/coar/access_right/c_abf2Almeyda Ortiz, AndresTorres Prada, Christian Julian2024-03-03T22:32:26Z20162024-03-03T22:32:26Z20162016https://noesis.uis.edu.co/handle/20.500.14071/33944Universidad Industrial de SantanderUniversidad Industrial de Santanderhttps://noesis.uis.edu.coEn las últimas décadas el diseño hidrosanitario se ha consolidado como un área de gran importancia e incipiente crecimiento con alta demanda dentro la ingeniería civil. Así, se ha requerido una amplia destreza en optimización de los procedimientos y diseños con el fin proporcionar mayor eficiencia en los resultados y diseños finales, esto se ha facilitado gracias a la articulación de herramientas computacionales clave en la organización, modelamiento y cálculo de estructuras y redes; en este caso hidrosanitarias, tal es el caso de software como CYPECAD 2015, utilizado en la construcción de edificaciones y el diseño de redes hidrosanitarias. El diseño hidrosanitario ha pasado de ser un área de poca importancia a una de las disciplinas en ingeniería en la cual se ha comenzado a tener mayor detalle y se le ha prestado mayor atención. En particular el área de ingeniería hidrosanitaria en Colombia se rige a partir de la TECNICA COLOMBIANA Código colombiano de fontanería), libros complementarios como ón de los diseños y procedimientos hidrosanitarios, tal es el caso del software CYPECAD con la extensión CYPECAD MEP (Mechanical- Electrical- Plumbing) mediante el cual se realiza el cálculo, dimensionamiento y comprobación de instalaciones de edificios en aspectos como: incendio, fontanería (agua caliente y agua fría), saneamiento (aguas pluviales y aguas negras). Por otro lado la aplicación y manejo de dichos instrumentos debe estar bajo control de profesionales integrales que tengan un sólido conocimiento teórico y un ágil desempeño en campo, ahí es donde las prácticas empresariales adquieren importancia, confiriendo al estudiante buenas capacidades para complementar los conocimientos y las experiencias de campo forjando un perfil más completo y que provea mejor calidad en el desempeño profesional.PregradoIngeniero CivilInternship as auxiliary of hydrosanitary design using the software cypecad 2015application/pdfspaUniversidad Industrial de SantanderFacultad de Ingenierías FisicomecánicasIngeniería CivilEscuela de Ingeniería CivilDiseño HidrosanitarioCypecad 2015SoftwareModelamiento Hidrosanitario.In the last decades the design hydro-sanitary has been consolidated as an area of great importance and incipient growth by discharge demands inside the civil engineering. This waya wide skill has been needed in optimization of the procedures and designs by the purpose to provide major efficiency in the results and final designsthis has been facilitated thanks to the joint of computational key tools in the organizationmodeling and calculation of structures and networks; in this case hydro-sanitarysuch it is the case of software as CYPECAD 2015 used in the construction of buildings and the design of hydro-sanitary networks. The hydro-sanitary design has gone from being an area of little importance to one of the disciplines in engineering which has begun to have more detail and has been paid more attention. In particular the area of plumbing engineering is governed Colombia from the "NTC 1500" (Colombian Technical Standard - Colombian Plumbing Code)supplementary books as "Design of plumbing and gas innovation in optimizing plumbing designs and proceduresas is the case with software CYPECAD CYPECAD MEP (Electrical- Mechanical- Plumbing) extension whereby the calculationdimensioning and testing of building installation is carried out in areas as fireplumbing (hot water and cold water)sanitation (rainwater and wastewater). On the other hand the application and managing of the above mentioned instruments must be under control of integral professionals who have a solid theoretical knowledge and an agile performance in fieldthere it is where the managerial practices acquire importancegiving to the student good aptitudes to complement the knowledge and the field experiences forging a more complete profile and that provides better quality in the professional performancePráctica empresarial como auxiliar de diseño hidrosanitario aplicando el software Cypecad 2015Hydro- Sanitary Design, Cypecad 2015, Software, Hydro-Sanitary Modeling.Tesis/Trabajo de grado - Monografía - Pregradohttp://purl.org/coar/resource_type/c_7a1fhttp://purl.org/coar/version/c_b1a7d7d4d402bcceORIGINALCarta de autorización.pdfapplication/pdf465814https://noesis.uis.edu.co/bitstreams/63f0669d-1bbb-48e7-9cd7-f456b1e92ee7/downloadd88cafcae9ede83f99c0c7e6c9ff20c3MD51Documento.pdfapplication/pdf1266707https://noesis.uis.edu.co/bitstreams/17c9338d-9a5d-40e3-aea3-b0a9bb8306b3/download56cbd33bb60bc3b26413a8d3c5dee103MD52Nota de proyecto.pdfapplication/pdf147199https://noesis.uis.edu.co/bitstreams/882e0598-e56e-4b2d-abf4-f2bf9cd2e647/download162706a8e7f2c98c342fe4918196a142MD5320.500.14071/33944oai:noesis.uis.edu.co:20.500.14071/339442024-03-03 17:32:26.391http://creativecommons.org/licenses/by-nc/4.0http://creativecommons.org/licenses/by/4.0/open.accesshttps://noesis.uis.edu.coDSpace at UISnoesis@uis.edu.co |