Synthesis and Mössbauer characterization of Cu and Cr doped magnetites
ABSTRACT: A detailed Móssbauer investigation of magnetites prepared under different hydrothermal conditions and doped with Cu and Cr is presented. The samples were characterized by means of room temperature Móssbauer spectrometry, infrared spectroscopy, and X-ray diffraction. Móssbauer results show...
- Autores:
-
Barrero Meneses, Cesar Augusto
Morales Aramburo, Alvaro Luis
Mazo Zuluaga, Johan
Jaramillo Isaza, Franklyn
Pérez, Gabriel
Escobar Sierra, Diana Marcela
Arroyave Posada, Carlos Enrique
Tobón Gómez, Jorge Enrique
Montoya Izquierdo, Paula Marcela
Osorio Orozco, Luis Felipe
Vandenberghe, R E
Greneche, J M
- Tipo de recurso:
- Article of investigation
- Fecha de publicación:
- 2003
- Institución:
- Universidad de Antioquia
- Repositorio:
- Repositorio UdeA
- Idioma:
- eng
- OAI Identifier:
- oai:bibliotecadigital.udea.edu.co:10495/27076
- Acceso en línea:
- http://hdl.handle.net/10495/27076
- Palabra clave:
- Cobre
Copper
Cromo
Chromium
Espectroscopía de Mossbauer
Mossbauer spectroscopy
Espectroscopia de infrarrojos
Infrared spectroscopy
Síntesis química
Chemical synthesis
Magnetita dopada
Productos de corrosión
- Rights
- openAccess
- License
- http://creativecommons.org/licenses/by/2.5/co/
Summary: | ABSTRACT: A detailed Móssbauer investigation of magnetites prepared under different hydrothermal conditions and doped with Cu and Cr is presented. The samples were characterized by means of room temperature Móssbauer spectrometry, infrared spectroscopy, and X-ray diffraction. Móssbauer results show that the hydrothermal method produces highy stoichiometric and relativelly well-crystallized magnetites. The results suggest that the best samples are obtained when the alkaline solution is added quickly to the ferrous solution. It was also found that mixing the solutions under constant ultrasonic stirring produce magnetites with slightly better crystallinity and stoichiometry than the samples produced under magnetic or nitrogen bubbling stirring. The effect of the Cu and Cr on the hyperfine parameters is also presented and discussed. |
---|