Propuesta de una metodología para el control y seguimiento al proceso de soldadura en la empresa cpc ingeniería y mantenimiento S.A.S
The company CPC Ingeniería y Mantenimiento SAS, presents problems in its production process, most of its products require that the union of its parts is through the application of welding, a process that does not have established parameters for this activity, so it was decided to present to the comp...
- Autores:
-
Camargo Bonilla, Oscar Fernando
- Tipo de recurso:
- Trabajo de grado de pregrado
- Fecha de publicación:
- 2021
- Institución:
- Universidad Antonio Nariño
- Repositorio:
- Repositorio UAN
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.uan.edu.co:123456789/5070
- Acceso en línea:
- http://repositorio.uan.edu.co/handle/123456789/5070
- Palabra clave:
- Soldadura
Arco eléctrico
SMAW
Calidad
Procedimiento
Welding
Electric arc
SMAW
Quality
Procedure
- Rights
- openAccess
- License
- Attribution 4.0 International (CC BY 4.0)
| Summary: | The company CPC Ingeniería y Mantenimiento SAS, presents problems in its production process, most of its products require that the union of its parts is through the application of welding, a process that does not have established parameters for this activity, so it was decided to present to the company a proposal for improvement in this area, in order to provide its customers with better quality products. A diagnosis of the company was made regarding the control of the production process, where it was found that the company does not control the raw material acquired, nor does it follow up during the assembly of the different products, nor does it have a clear procedure for the correct application of welding to its products. The proposal submitted to the company establishes clear and precise procedures on the control of purchased raw material, dimensional control of the manufactured product, the correct application of welding for the union of parts that make up the product and their inspection. The application of controls in the reception of raw material, manufacturing process and finished product will allow the company to keep a traceability of its projects in order to mitigate reprocesses. It is recommended that the company train its personnel in order to reinforce their knowledge of blueprint interpretation, welding application, and correct use of equipment, tools, and personal protective equipment |
|---|