Diseño e implementación de un prototipo para el ensamble de arandelas en clavos para la Instalación de láminas onduladas de zinc
The following project develops an automatic prototype for the assembly of rubber washers on nails used for the installation of zinc sheets for the construction of roofs, which is aimed at hardware stores and small companies in the construction sector. The design of the automatic prototype is simple,...
- Autores:
-
Pérez Jiménez, Edgardo José
Quintana Ramos, Marlon Andrés
- Tipo de recurso:
- Trabajo de grado de pregrado
- Fecha de publicación:
- 2021
- Institución:
- Universidad Antonio Nariño
- Repositorio:
- Repositorio UAN
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.uan.edu.co:123456789/6129
- Acceso en línea:
- http://repositorio.uan.edu.co/handle/123456789/6129
- Palabra clave:
- Sector de la construcción
Eficiencia
Prototipo automático
Clavos
Arandelas
Lamina de zinc
Instrumentación electrónica
Servo motor
Motor paso a paso
Actuador lineal
Construction sector
Efficiency
Automatic prototype
Nails
Washers
Zinc foil
Electronic instrumentation
Servomotor
Alinear actuator
- Rights
- openAccess
- License
- Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
Summary: | The following project develops an automatic prototype for the assembly of rubber washers on nails used for the installation of zinc sheets for the construction of roofs, which is aimed at hardware stores and small companies in the construction sector. The design of the automatic prototype is simple, low-cost and efficient that allows assemblies in less time with respect to the manual assembly process that is currently carried out and therefore, it aims to reduce the production costs of the companies. |
---|