Diseño y construcción de un posicionador electrónico para control de la compuerta de flujo de carbón en el pulverizador n°1 unidad I de termopaipa
This project corresponds to the automation of the gate of mill No. 1 of Unit 1 of Termopaipa. Specifically, the manual carbon valve opening control which represented operational and occupational risk was replaced. Before automation, the gate was manipulated manually. For this purpose, the control ro...
- Autores:
-
Becerra Reyes, Jonathan Rolando
- Tipo de recurso:
- Trabajo de grado de pregrado
- Fecha de publicación:
- 2020
- Institución:
- Universidad Antonio Nariño
- Repositorio:
- Repositorio UAN
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.uan.edu.co:123456789/2531
- Acceso en línea:
- http://repositorio.uan.edu.co/handle/123456789/2531
- Palabra clave:
- Caldera
Turbina
Condensador
Control industrial
Boiler
Turbine
Condenser
Industrial control
- Rights
- openAccess
- License
- Attribution 4.0 International (CC BY 4.0)
Summary: | This project corresponds to the automation of the gate of mill No. 1 of Unit 1 of Termopaipa. Specifically, the manual carbon valve opening control which represented operational and occupational risk was replaced. Before automation, the gate was manipulated manually. For this purpose, the control room operator gave the order to the mill area operator to open or close the gate in different positions. In order to replace this maneuver, an actuator positioner that complies with regulations for the operation site was selected and the operation site was conditioned. The system installation was scheduled with ABB to avoid communication conflicts and is currently in service. |
---|