Elaboración De Planos Técnicos Del Sistema Helice- Viga Del Laboratorio De Detectores Sede
-The following document is based on the visual inspection of the propeller-beam project to establish the metrology of the mechanical parts of this project, for subsequent digitization of the information, having the correct digitization in the mechanical design will be an input for the changes future...
- Autores:
-
Morales Cortes, Néstor Ferney
- Tipo de recurso:
- Trabajo de grado de pregrado
- Fecha de publicación:
- 2024
- Institución:
- Universidad Antonio Nariño
- Repositorio:
- Repositorio UAN
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.uan.edu.co:123456789/9389
- Acceso en línea:
- http://repositorio.uan.edu.co/handle/123456789/9389
- Palabra clave:
- Digitalización
Diseño mecánico
Metrología
T151.24
Digitalization
Mechanical design
Metrology
- Rights
- openAccess
- License
- Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
| Summary: | -The following document is based on the visual inspection of the propeller-beam project to establish the metrology of the mechanical parts of this project, for subsequent digitization of the information, having the correct digitization in the mechanical design will be an input for the changes futures that allow expanding the configuration of the propeller-beam system. The project presented here is based on the need to find better rigidity and damping components and mitigate the impact of the beam on its structure. Keywords: digitalization, mechanical design, metrology. |
|---|