Automatización del Mecanismo se Funcionamiento de la Válvula Grabber para Manejo de Tubería
The development of this project had as its objective automation of the mechanism of Grabber valve operation for pipe handling in conventional Top Drive at the Masa Stork company. This project was developed in El Paso, Cesar specifically in the township of La Loma, the Tesco drilling equipment 250 HM...
- Autores:
-
Avendaño Quiroga, Johan Alexander
- Tipo de recurso:
- Trabajo de grado de pregrado
- Fecha de publicación:
- 2022
- Institución:
- Universidad Antonio Nariño
- Repositorio:
- Repositorio UAN
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.uan.edu.co:123456789/7333
- Acceso en línea:
- http://repositorio.uan.edu.co/handle/123456789/7333
- Palabra clave:
- Automatización,
Válvula Grabber,
Tubería,
Top Drive,
Funcionamiento,
Mecanismo
- Rights
- openAccess
- License
- Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
| Summary: | The development of this project had as its objective automation of the mechanism of Grabber valve operation for pipe handling in conventional Top Drive at the Masa Stork company. This project was developed in El Paso, Cesar specifically in the township of La Loma, the Tesco drilling equipment 250 HMI-475, used in the company's operations Masa Stork, a system that has been taken as a design reference and later the installation of an automation system of the Grabber valve operating mechanism for pipe management in conventional Top Drives. This work It was carried out as a case study, with a qualitative approach, through applied descriptive research |
|---|