Prototipo de sistema de medición de bajo costo para la medición de chatter en procesos de fresado CNC
In this document, it was proposed to develop a prototype of a low-cost measurement system for the detection of vibrations associated with chatter in CNC milling processes. An Arduino microcontroller is used as the acquisition system and an MPU6050 accelerometer for the instrumentation of the work, o...
- Autores:
-
Rodríguez Castillo, Melany Lorena
Ariza Hernández, Edwin Alberto
- Tipo de recurso:
- Trabajo de grado de pregrado
- Fecha de publicación:
- 2022
- Institución:
- Universidad Antonio Nariño
- Repositorio:
- Repositorio UAN
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.uan.edu.co:123456789/7249
- Acceso en línea:
- http://repositorio.uan.edu.co/handle/123456789/7249
- Palabra clave:
- CNC,
Chatter,
Modelo dinámico,
sistema de medición,
Fresadora
CNC,
Chatter,
Dynamic model,
measuring system,
Milling machine.
- Rights
- openAccess
- License
- Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
| Summary: | In this document, it was proposed to develop a prototype of a low-cost measurement system for the detection of vibrations associated with chatter in CNC milling processes. An Arduino microcontroller is used as the acquisition system and an MPU6050 accelerometer for the instrumentation of the work, obtaining experimentally the dynamic behavior of the system, from this the model is validated by means of analyzes carried out of the fast Fourier transform and the lobe diagrams to determine stable and unstable points in which the chatter can exist during the milling process |
|---|