Diseño de un sistema de ventilación Jet Fan para extracción de monóxido de carbono en estacionamientos subterráneos
The main objective of this project was to design a Jet Fan ventilation system for the extraction of carbon monoxide in underground parking lots, from the concern for the little or no natural ventilation that these spaces have, even more so when other levels rest on them. of parking lots capable of p...
- Autores:
-
Durán Carrasquilla, Jesús David
Payares Urieta, Edgar Javier
- Tipo de recurso:
- Trabajo de grado de pregrado
- Fecha de publicación:
- 2021
- Institución:
- Universidad Antonio Nariño
- Repositorio:
- Repositorio UAN
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.uan.edu.co:123456789/5733
- Acceso en línea:
- http://repositorio.uan.edu.co/handle/123456789/5733
- Palabra clave:
- sistema
ventilación
Jet Fan
Monoxido de carbono
estacionamientos
system,
ventilation
Jet Fan
Carbon monoxide
parking lots
- Rights
- openAccess
- License
- Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
| Summary: | The main objective of this project was to design a Jet Fan ventilation system for the extraction of carbon monoxide in underground parking lots, from the concern for the little or no natural ventilation that these spaces have, even more so when other levels rest on them. of parking lots capable of producing a higher concentration of carbon monoxide. To carry out this project, an underground parking lot in the city of Bogotá was visited, which has a projection to raise four more levels of construction on its bases. Therefore, in this parking lot with little natural ventilation, a planimetry of five parking levels was carried out, taking as a basis the already existing underground parking lot, the determination of the air required to reduce carbon monoxide, was calculated taking the geographical characteristics of the location and by means of the international formulas required for these calculations it was possible to obtain even the number of equipment required to install the Jet Fan. While the establishment of the fan location points was calculated by exporting the plans to a free version of SolidWorks and entering the sizing data and number of equipment allowed to simulate the location points for the fans. A selection process was also carried out for the equipment required for the installation if it is to be carried out in the determined area |
|---|