Optimización básica del rodete de una bomba centrífuga de 500 Watios mediante dinámica de fluidos computacional (CFD).
The general objective of this project is to evaluate the geometry of the impeller of the 500- watt centrífugal pump of the Antonio Nariño University, Tunja headquarters (UAN) by using the CAD tool (Autodesk Inventur) with the simulation and development of a computational analysis. of fluids (CFD) in...
- Autores:
-
Castillo Amézquita, Jorge Armando
- Tipo de recurso:
- Trabajo de grado de pregrado
- Fecha de publicación:
- 2021
- Institución:
- Universidad Antonio Nariño
- Repositorio:
- Repositorio UAN
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.uan.edu.co:123456789/4654
- Acceso en línea:
- http://repositorio.uan.edu.co/handle/123456789/4654
- Palabra clave:
- Bomba centrífuga
Rodete
Álabes
Presión
Caudal
Fluidos
CFD
Centrifugal pump
Impeller
Vanes
Pressure
Flow
Fluids
CFD
- Rights
- openAccess
- License
- Attribution-NoDerivatives 4.0 International (CC BY-ND 4.0)
| Summary: | The general objective of this project is to evaluate the geometry of the impeller of the 500- watt centrífugal pump of the Antonio Nariño University, Tunja headquarters (UAN) by using the CAD tool (Autodesk Inventur) with the simulation and development of a computational analysis. of fluids (CFD) in order to optimize its performance, since a drop in the pressure head and a decrease in the flow provided by the pump can be observed. |
|---|