Aplicabilidad del método de los elementos finitos en el análisis y dimensionamiento de losas JCPC para carreteras de dos carriles

Two-lane road JCPC (Jointed-Plain-Concrete-Pavement) slabs were analyzed and dimensioned using the EverFE 2.25 finite element modeler in order to reproduce the efforts of the pavement slab in a more realistic way. The “Westergaard”-1948 analytical method was used for the validation. With the results of efforts and the number of allowed repetitions of load we can conclude that the designs of JCPC slabs for two lanes do not require the analysis and dimensioning with own weight of the structure, because the percentage of variation is little significant. Therefore, we recommend omitting the density parameter in the analysis to generate a lower computational cost. This study shows us a route to continue analyzing other factors that influence the sizing of rigid pavements. We hope in future investigations to integrate loads of different vehicles and the behaviors produced by the presence of segments and tie bars in transverse and longitudinal joints.

• Autores: Pallares-Muñoz, Myriam Rocío; Pulecio-Díaz, Julián Andrés
• Fecha de publicación: 2017
• Institución: Universidad Santo Tomás
• Repositorio: Universidad Santo Tomás
• Idioma: spa
• OAI Identifier: oai:repository.usta.edu.co:11634/36177
• Acceso en línea: http://revistas.ustabuca.edu.co/index.php/ITECKNE/article/view/1769; http://hdl.handle.net/11634/36177
• License: Copyright (c) 2018 ITECKNE