Diseño y construcción de un banco de pruebas de ventilador axial para los laboratorios de la facultad de ingeniería mecánica de la universidad Santo Tomás seccional Tunja
This article addresses the present need during the production of an axial fan in the testing stage, where, through a test bench, the performance of the fan is obtained to know its operating capacity and provide a reference for its selection in the required applications. Therefore, the present resear...
- Autores:
-
Hernández Rojas, José Federico
Quintero Gamboa, Yina
Cely Guezguan, Leonardo
- Tipo de recurso:
- Fecha de publicación:
- 2021
- Institución:
- Universidad Santo Tomás
- Repositorio:
- Repositorio Institucional USTA
- Idioma:
- spa
- OAI Identifier:
- oai:repository.usta.edu.co:11634/41668
- Acceso en línea:
- http://revistas.ustatunja.edu.co/index.php/ingeniomagno/article/view/2184
http://hdl.handle.net/11634/41668
- Palabra clave:
- Aerodynamic performance
AMCA 210
axial fan
characteristic curve
Pitot tube
test bench
AMCA 210
banco de pruebas
curva característica
rendimiento aerodinámico
tubo de Pitot
ventilador axial
AMCA 210
bancada de teste
curva característica
desempenho aerodinámico
tubo de Pitot
ventilador axial
- Rights
- License
- Derechos de autor 2020 Ingenio Magno
| Summary: | This article addresses the present need during the production of an axial fan in the testing stage, where, through a test bench, the performance of the fan is obtained to know its operating capacity and provide a reference for its selection in the required applications. Therefore, the present research aimed to design and build an axial fan test bench that allows obtaining the characteristic curve of the fan under test. To achieve this, it was designed under the AMCA 210 standard “Laboratory Methods of Testing Fans forCertified Aerodynamic Performance Rating” of the Air Movement and Control Association International, it was modeled using Autodesk Inventor to obtain the drawings that guided the construction, together with the corresponding selection of instrumentation according to the specifications of the standard and low cost materials available in the local industry. Finally, the standardized low-cost axial fan test bench was obtained, the first in the region, at the service of students and professors of the Faculty of Mechanical Engineering of the Santo Tomás University Tunja sectional. |
|---|