Estudio experimental sobre propiedades de resistencia de la poliamida en suelos arcillosos
The presence of clay soil causes problems at the base of the structure: it swells when wet and shrinks when dry, which provides a reduction in the resistance to cutting of the soil. Plastic waste in the form of polyamide powder (PA-12) from the 3D printing industry can be used to improve the mechani...
- Autores:
-
Sivapriya, S.V.
Gokul Krishnan, J.
Reddy, Bijivemula Sruthi
Roshan, R.
Mohammed, Syed
- Tipo de recurso:
- Fecha de publicación:
- 2021
- Institución:
- Universidad Santo Tomás
- Repositorio:
- Repositorio Institucional USTA
- Idioma:
- eng
- OAI Identifier:
- oai:repository.usta.edu.co:11634/36227
- Acceso en línea:
- http://revistas.ustabuca.edu.co/index.php/ITECKNE/article/view/2538
- Palabra clave:
- Rights
- License
- Copyright (c) 2021 ITECKNE
| Summary: | The presence of clay soil causes problems at the base of the structure: it swells when wet and shrinks when dry, which provides a reduction in the resistance to cutting of the soil. Plastic waste in the form of polyamide powder (PA-12) from the 3D printing industry can be used to improve the mechanical properties of the soil. This experimental study is an attempt to combine these two objectives of stabilizing the soil by using waste PA-12. The mechanical and shear resistant properties gave us confidence in choosing PA-12 as a stabilizer in clay soils, making them composite soils. |
|---|