Experimental study of the cutting processes effect on the surface hardness of ASTM A36 steel

This article analyses the hardness of ASTM-A36 steel both in its delivery state and after various cutting processes. The material was cut with different methods conventionally used in the metal-mechanic and construction industry, in addition to other non-conventional processes used to a lesser extent in the industry. In addition, similar cuts were made to maintain test homogeneity and to analyze the faces of the cut on each specimen in a similar manner. Among the conventional cuts made to the specimens are the milling machine, oxy-cutting and cutting machine, while the non-conventional ones were applied by EDM and plasma, maintaining as far as possible similar cutting and working parameters. Subsequently, the hardness of the cut surface of each of the specimens was studied using an AFFRI 250 DMRC durometer, which allowed quantifying the changes in the material depending on the cutting method used and defining according to each method that may affect the final application of the material. The graphical results allowed a comparative analysis of all the methods used, as well as the differences found between them and to obtain important conclusions that can be used in the new techniques of the manufacturing processes.

• Autores: Peralta Hernandez, Edwin; Sorzano Jimenez, Francisco; Coba Salcedo, Milton Fabian; Acevedo Peñaloza, Carlos Humberto; Valencia Ochoa, Guillermo
• Tipo de recurso: Article of journal
• Fecha de publicación: 2018
• Institución: Universidad Francisco de Paula Santander
• Repositorio: Repositorio Digital UFPS
• Idioma: eng
• OAI Identifier: oai:repositorio.ufps.edu.co:ufps/6385
• Acceso en línea: http://repositorio.ufps.edu.co/handle/ufps/6385; https://doi.org/10.12988/ces.2018.84196
• Palabra clave: Hardness; Tests; Indenter; Cutting Processes
• Rights: openAccess
• License: Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)