Design of a ball burnishing tool with interchangeable tip
The following work was carried out with the goal of studying the functionality of a previously realized design of an interchangeable indenter tool for the ball burnishing process in a numerical control milling machine with several AISI 1045 specimens, to identify and corroborate changes in the final...
- Autores:
-
Coba Salcedo, Milton Fabian
Acevedo Peñaloza, Carlos Humberto
Guerrero Gomez, Gustavo
- Tipo de recurso:
- Article of journal
- Fecha de publicación:
- 2018
- Institución:
- Universidad Francisco de Paula Santander
- Repositorio:
- Repositorio Digital UFPS
- Idioma:
- eng
- OAI Identifier:
- oai:repositorio.ufps.edu.co:ufps/1743
- Acceso en línea:
- http://repositorio.ufps.edu.co/handle/ufps/1743
https://doi.org/10.12988/ces.2018.88402
- Palabra clave:
- Roughness
burnishing
Milling machine
- Rights
- openAccess
- License
- Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
| Summary: | The following work was carried out with the goal of studying the functionality of a previously realized design of an interchangeable indenter tool for the ball burnishing process in a numerical control milling machine with several AISI 1045 specimens, to identify and corroborate changes in the final roughness obtained and the averages of the same material with the application of the process, in addition to finding improvements in the process times, to reduce the dead times that translate into lower costs, and an improvement in the surface finish. |
|---|