Pellets Obtained from Iron Row Material in the Direct Reduction Processes

Initially, representative samples of mineral fines, binders and coals, the reason for the study, were taken to characterize them. At the same time, the pelletizing disk of the laboratories of the UPTC School of Metallurgy was developed. Then we proceeded to make mixtures of mineral fines, coal and binder, in order to find the ideal proportions to obtain high-performance pellets, taking into account the kinetic and thermodynamic conditions of the process. The experimental design determined that the number of tests to be performed is 48, that is, 3 repetitions for each sample. Then, tests were carried out to study the reducibility of the pellets, evaluating the behavior of these with each of the binders once the reduction temperature had been reached. The pre-reduced obtained was analyzed by chemical and microscopic methods.

• Fecha de publicación: 2010
• Institución: Universidad Pedagógica y Tecnológica de Colombia
• Repositorio: RiUPTC: Repositorio Institucional UPTC
• Idioma: spa
• OAI Identifier: oai:repositorio.uptc.edu.co:001/13971
• Acceso en línea: https://revistas.uptc.edu.co/index.php/ingenieria/article/view/1329; https://repositorio.uptc.edu.co/handle/001/13971
• Palabra clave: reduction; pellets; binder; reducing agent; reducción; pelets; aglomerante; agente reductor
• License: Copyright (c) 2006 Diana Carolina Africano Higuera Álvaro Forero Pinilla