Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear
This paper studies the influence of variables such as holding temperatures and times during austempering of High Chromium White Cast Iron (HCWCI), with the following chemical composition: Cr 25 %, C 3 %, Si 0.47 %, Mn 0.74 % and Mo 1.02 %. The aim of the austempering was to modify the percentage of...
- Autores:
- Tipo de recurso:
- Article of investigation
- Fecha de publicación:
- 2017
- Institución:
- Universidad Pedagógica y Tecnológica de Colombia
- Repositorio:
- RiUPTC: Repositorio Institucional UPTC
- Idioma:
- eng
- OAI Identifier:
- oai:repositorio.uptc.edu.co:001/14194
- Acceso en línea:
- https://revistas.uptc.edu.co/index.php/ingenieria/article/view/7319
https://repositorio.uptc.edu.co/handle/001/14194
- Palabra clave:
- Austempered
Retained austenite
High chromium white cast iron
Chromium carbides
Austemperado
Austenita retenida
Desgaste abrasivo
Fundiciones al alto cromo
Carburos de cromo
- Rights
- openAccess
- License
- http://purl.org/coar/access_right/c_abf2
| id |
REPOUPTC2_d3559167ea3e9115c55feaaf249c7705 |
|---|---|
| oai_identifier_str |
oai:repositorio.uptc.edu.co:001/14194 |
| network_acronym_str |
REPOUPTC2 |
| network_name_str |
RiUPTC: Repositorio Institucional UPTC |
| repository_id_str |
|
| spelling |
2017-09-052024-07-05T19:11:34Z2024-07-05T19:11:34Zhttps://revistas.uptc.edu.co/index.php/ingenieria/article/view/731910.19053/01211129.v26.n46.2017.7319https://repositorio.uptc.edu.co/handle/001/14194This paper studies the influence of variables such as holding temperatures and times during austempering of High Chromium White Cast Iron (HCWCI), with the following chemical composition: Cr 25 %, C 3 %, Si 0.47 %, Mn 0.74 % and Mo 1.02 %. The aim of the austempering was to modify the percentage of retained austenite and its correlation to abrasive wear resistance under different conditions.Microhardness tests, SEM-EDS and XRD were performed to determine mechanical properties, chemical composition, and type of carbides and microstructures present, respectively. The tests complied with the ASTM G-65 standard. Results showed that the best performance against abrasion was achieved for austempering at 450 ºC with holding time of 6 hours.Este trabajo estudia la influencia de variables tales como tiempo y temperatura de sostenimiento durante el austemperado de una fundición blanca al alto cromo con la siguiente composición: Cr, 25 %; C, 3 %; Si, 0.47 %; Mn, 0.74 %, y Mo, 1.02 %. El objetivo del austemperado fue modificar el porcentaje de austenita retenida, y correlacionarlo con la resistencia al desgaste abrasivo bajo diferentes condiciones; los ensayos fueron realizados según los lineamientos de la norma ASTM G65. Las técnicas de microdureza MEB-EDS y DRX fueron realizadas para determinar las propiedades mecánicas, composición química, tipo de carburos y microestructuras presentes, respectivamente. Los resultados mostraron que la mejor resistencia a la abrasión fue alcanzada a una temperatura de austemperado de 450 ºC y a 6 horas de permanencia.application/pdfapplication/xmlengengUniversidad Pedagógica y Tecnológica de Colombiahttps://revistas.uptc.edu.co/index.php/ingenieria/article/view/7319/5709https://revistas.uptc.edu.co/index.php/ingenieria/article/view/7319/6423Revista Facultad de Ingeniería; Vol. 26 No. 46 (2017); 71-79Revista Facultad de Ingeniería; Vol. 26 Núm. 46 (2017); 71-792357-53280121-1129AustemperedRetained austeniteHigh chromium white cast ironChromium carbidesAustemperadoAustenita retenidaDesgaste abrasivoFundiciones al alto cromoCarburos de cromoMicrostructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wearEvolución microestrutural durante austemperado de una fundición blanca al alto cromo ASTM A-532, Clase III, Tipo A, sometida a desgaste abrasivoArtículo de revistahttp://purl.org/coar/resource_type/c_2df8fbb1info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionTexthttps://purl.org/redcol/resource_type/ARThttp://purl.org/coar/version/c_970fb48d4fbd8a85info:eu-repo/semantics/openAccesshttp://purl.org/coar/access_right/c_abf2Higuera-Cobos, Oscar FabiánBucurú-Vasco, JeisonLoaiza-Patiño, Andrés FelipeMonsalve-Arias, Mónica JohannaMesa-Grajales, Dairo HernánPublicationORIGINAL6423.htmltext/html31972https://repositorio.uptc.edu.co/bitstreams/e6d0f692-746a-4617-89e6-5216b3ad50bb/download9e2fc87a1ba7527330714f3137bb0c3fMD51trueAnonymousREAD5709.htmltext/html32499https://repositorio.uptc.edu.co/bitstreams/d276c9fc-6c35-4eca-ad0a-de7319de0f5d/download706776fbb19e78b3753b662c49b5e752MD52falseAnonymousREADTEXT6423.html.txt6423.html.txtExtracted texttext/plain5230https://repositorio.uptc.edu.co/bitstreams/dcf90923-daa8-46ca-80da-2ad34934ff63/download87466c6571c46f91642dd4d772054685MD53falseAnonymousREAD5709.html.txt5709.html.txtExtracted texttext/plain5549https://repositorio.uptc.edu.co/bitstreams/33f2c412-b0fe-45d3-8381-9f648836cf0e/download67e7701a13592f2631b34d593c650554MD54falseAnonymousREAD001/14194oai:repositorio.uptc.edu.co:001/141942026-05-12 08:32:59.577open.accesshttps://repositorio.uptc.edu.coRepositorio Institucional UPTCbdigital@metabiblioteca.com |
| dc.title.en-US.fl_str_mv |
Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear |
| dc.title.es-ES.fl_str_mv |
Evolución microestrutural durante austemperado de una fundición blanca al alto cromo ASTM A-532, Clase III, Tipo A, sometida a desgaste abrasivo |
| title |
Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear |
| spellingShingle |
Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear Austempered Retained austenite High chromium white cast iron Chromium carbides Austemperado Austenita retenida Desgaste abrasivo Fundiciones al alto cromo Carburos de cromo |
| title_short |
Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear |
| title_full |
Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear |
| title_fullStr |
Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear |
| title_full_unstemmed |
Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear |
| title_sort |
Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear |
| dc.subject.en-US.fl_str_mv |
Austempered Retained austenite High chromium white cast iron Chromium carbides |
| topic |
Austempered Retained austenite High chromium white cast iron Chromium carbides Austemperado Austenita retenida Desgaste abrasivo Fundiciones al alto cromo Carburos de cromo |
| dc.subject.es-ES.fl_str_mv |
Austemperado Austenita retenida Desgaste abrasivo Fundiciones al alto cromo Carburos de cromo |
| description |
This paper studies the influence of variables such as holding temperatures and times during austempering of High Chromium White Cast Iron (HCWCI), with the following chemical composition: Cr 25 %, C 3 %, Si 0.47 %, Mn 0.74 % and Mo 1.02 %. The aim of the austempering was to modify the percentage of retained austenite and its correlation to abrasive wear resistance under different conditions.Microhardness tests, SEM-EDS and XRD were performed to determine mechanical properties, chemical composition, and type of carbides and microstructures present, respectively. The tests complied with the ASTM G-65 standard. Results showed that the best performance against abrasion was achieved for austempering at 450 ºC with holding time of 6 hours. |
| publishDate |
2017 |
| dc.date.accessioned.none.fl_str_mv |
2024-07-05T19:11:34Z |
| dc.date.available.none.fl_str_mv |
2024-07-05T19:11:34Z |
| dc.date.none.fl_str_mv |
2017-09-05 |
| dc.type.none.fl_str_mv |
Artículo de revista |
| dc.type.coar.none.fl_str_mv |
http://purl.org/coar/resource_type/c_2df8fbb1 |
| dc.type.driver.none.fl_str_mv |
info:eu-repo/semantics/article |
| dc.type.version.spa.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
| dc.type.content.none.fl_str_mv |
Text |
| dc.type.redcol.none.fl_str_mv |
https://purl.org/redcol/resource_type/ART |
| dc.type.coarversion.none.fl_str_mv |
http://purl.org/coar/version/c_970fb48d4fbd8a85 |
| format |
http://purl.org/coar/resource_type/c_2df8fbb1 |
| status_str |
publishedVersion |
| dc.identifier.none.fl_str_mv |
https://revistas.uptc.edu.co/index.php/ingenieria/article/view/7319 10.19053/01211129.v26.n46.2017.7319 |
| dc.identifier.uri.none.fl_str_mv |
https://repositorio.uptc.edu.co/handle/001/14194 |
| url |
https://revistas.uptc.edu.co/index.php/ingenieria/article/view/7319 https://repositorio.uptc.edu.co/handle/001/14194 |
| identifier_str_mv |
10.19053/01211129.v26.n46.2017.7319 |
| dc.language.none.fl_str_mv |
eng |
| dc.language.iso.spa.fl_str_mv |
eng |
| language |
eng |
| dc.relation.none.fl_str_mv |
https://revistas.uptc.edu.co/index.php/ingenieria/article/view/7319/5709 https://revistas.uptc.edu.co/index.php/ingenieria/article/view/7319/6423 |
| dc.rights.accessrights.none.fl_str_mv |
info:eu-repo/semantics/openAccess |
| dc.rights.coar.none.fl_str_mv |
http://purl.org/coar/access_right/c_abf2 |
| eu_rights_str_mv |
openAccess |
| rights_invalid_str_mv |
http://purl.org/coar/access_right/c_abf2 |
| dc.format.none.fl_str_mv |
application/pdf application/xml |
| dc.publisher.en-US.fl_str_mv |
Universidad Pedagógica y Tecnológica de Colombia |
| dc.source.en-US.fl_str_mv |
Revista Facultad de Ingeniería; Vol. 26 No. 46 (2017); 71-79 |
| dc.source.es-ES.fl_str_mv |
Revista Facultad de Ingeniería; Vol. 26 Núm. 46 (2017); 71-79 |
| dc.source.none.fl_str_mv |
2357-5328 0121-1129 |
| institution |
Universidad Pedagógica y Tecnológica de Colombia |
| bitstream.url.fl_str_mv |
https://repositorio.uptc.edu.co/bitstreams/e6d0f692-746a-4617-89e6-5216b3ad50bb/download https://repositorio.uptc.edu.co/bitstreams/d276c9fc-6c35-4eca-ad0a-de7319de0f5d/download https://repositorio.uptc.edu.co/bitstreams/dcf90923-daa8-46ca-80da-2ad34934ff63/download https://repositorio.uptc.edu.co/bitstreams/33f2c412-b0fe-45d3-8381-9f648836cf0e/download |
| bitstream.checksum.fl_str_mv |
9e2fc87a1ba7527330714f3137bb0c3f 706776fbb19e78b3753b662c49b5e752 87466c6571c46f91642dd4d772054685 67e7701a13592f2631b34d593c650554 |
| bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 MD5 |
| repository.name.fl_str_mv |
Repositorio Institucional UPTC |
| repository.mail.fl_str_mv |
bdigital@metabiblioteca.com |
| _version_ |
1881673932330762240 |
