Numerical simulation of the combustion stability of natural gas and syngas in a surface-stabilized combustion burner
Surface-stabilized combustion burners is a promising combustion technique that has been studied for more than a decade. However, in the design stage of these burners is hard to determine if under certain operating conditions the burner would operate adequately. In this paper, we performed a numerica...
- Autores:
- Tipo de recurso:
- Fecha de publicación:
- 2019
- Institución:
- Universidad de Medellín
- Repositorio:
- Repositorio UDEM
- Idioma:
- eng
- OAI Identifier:
- oai:repository.udem.edu.co:11407/5667
- Acceso en línea:
- http://hdl.handle.net/11407/5667
- Palabra clave:
- Blending
Gases
Hydrogen
Natural gas
Numerical models
Porous materials
Thermodynamic stability
Combustion stability
Combustion technique
Mass and energy balance
Numerical approaches
Operating condition
Simultaneous solution
Temperature profiles
Thermo-physical property
Combustion
- Rights
- License
- http://purl.org/coar/access_right/c_16ec
Summary: | Surface-stabilized combustion burners is a promising combustion technique that has been studied for more than a decade. However, in the design stage of these burners is hard to determine if under certain operating conditions the burner would operate adequately. In this paper, we performed a numerical approach to predict the flame stability in a surface-stabilized combustion burner. Here we considered a numerical approach that includes simultaneous solution of mass and energy balance for both, the gas and solid phase, as well as a proper estimation of thermo-chemical and thermo-physical properties. The numerical model was validated against experimental data reported in previous studies. These data involve results with natural gas and the blending of natural gas with three high hydrogen content synthetic gases in equimolar proportions. We evaluated three synthetic gases with high hydrogen contents ranging from 60% H2 to 75% H2. The data also involve thermal power from 300 to 500 kW/m2. The results indicate that the numerical approach described in this work predicts very well the flame stability and temperature profile within the porous media. Therefore, it can be used to study surface-stabilized combustion burners. © Published under licence by IOP Publishing Ltd. |
---|