Removal of dyes from aqueous solutions by adsorbent prepared from coffee residues
This study reports the production of an adsorbent material derived from extracted coffee residues using phosphoric acid and zinc chloride as activating agents. The structural features of the materials were characterized using different analytical techniques. The BET surface areas were found between...
- Autores:
- Tipo de recurso:
- Fecha de publicación:
- 2019
- Institución:
- Universidad de Medellín
- Repositorio:
- Repositorio UDEM
- Idioma:
- eng
- OAI Identifier:
- oai:repository.udem.edu.co:11407/5684
- Acceso en línea:
- http://hdl.handle.net/11407/5684
- Palabra clave:
- Aromatic compounds
Chlorine compounds
Dyes
Isotherms
Kinetics
Monolayers
Stripping (dyes)
Zinc chloride
Adsorbent materials
Batch adsorption tests
Diffusion controlled
Equilibrium adsorption
Initial dye concentration
Langmuir isotherm models
Monolayer adsorption
Pseudo-second order model
Adsorption
- Rights
- License
- http://purl.org/coar/access_right/c_16ec
Summary: | This study reports the production of an adsorbent material derived from extracted coffee residues using phosphoric acid and zinc chloride as activating agents. The structural features of the materials were characterized using different analytical techniques. The BET surface areas were found between 3.81 m2.g-1 y 176.27 m2.g-1, while the FTIR analysis showed the formation of oxygenated functional groups, which are active in the adsorption process. These materials were evaluated as adsorbents for the removal of methylene blue from aqueous solution. Batch adsorption tests were performed at room temperature and the effects of contact time and, initial dye concentration was investigated. The equilibrium adsorption results were complied with Langmuir isotherm model and its maximum monolayer adsorption capacity was 15.92 mg.g-1. Adsorption kinetics studies indicated that the pseudo second order model yielded the best fit for the kinetic data. This typical dependence of methylene blue uptake on kinetic studies indicated the adsorption process to be both chemisorption and diffusion controlled. The experimental data obtained in the present study indicate that coffee residues are suitable candidates for use as adsorbents in the removal of cationic dyes. © 2019 Published under licence by IOP Publishing Ltd. |
---|