Elastic constants influence on the L4-L5-S1 annuli fibrosus behavior, a probabilistic finite element analysis

A probabilistic finite element (FE) analysis of the L4-L5 and L5-S1 human annulus fibrosus (AF) was conducted to obtain a better understanding of the biomechanics of the AF and to quantify its influence on the range of motion (ROM) of the L4-L5 and L5-S1 segments. Methods: The FE models were compose...

Full description

Autores:
Jaramillo Suárez, Héctor Enrique
García Álvarez, José Jaime
Tipo de recurso:
Article of journal
Fecha de publicación:
2017
Institución:
Universidad Autónoma de Occidente
Repositorio:
RED: Repositorio Educativo Digital UAO
Idioma:
eng
OAI Identifier:
oai:red.uao.edu.co:10614/11216
Acceso en línea:
http://hdl.handle.net/10614/11216
Palabra clave:
Biomecánica
Método de elementos finitos
Biomechanics
Finite element analysis
Hyperelastic
Range of motion
Intervertebral discs
Probabilistic analysis
Sensitivity factor
Rights
openAccess
License
Derechos Reservados - Universidad Autónoma de Occidente
Description
Summary:A probabilistic finite element (FE) analysis of the L4-L5 and L5-S1 human annulus fibrosus (AF) was conducted to obtain a better understanding of the biomechanics of the AF and to quantify its influence on the range of motion (ROM) of the L4-L5 and L5-S1 segments. Methods: The FE models were composed of the AF and the upper and lower endplates. The AF was represented as a continuous material composed of a hyperelastic isotropic Yeoh matrix reinforced with two families of fibers described with an exponential energy function. The caudal endplate was fully restricted and 8 Nm pure moment was applied to the cranial endplate in flexion, extension, lateral flexion and axial rotation. The mechanical constants were determined randomly based on a normal distribution and average values reported. Results: Results of the 576 models show that the ROM was more sensitive to the initial stiffness of the fibers rather than to the stiffening coefficient represented in the exponential function. The ROM was more sensitive to the input variables in extension, flexion, axial rotation and lateral bending. The analysis showed an increased probability for the L5-S1 ROM to be higher in flexion, extension and axial rotation, and smaller in lateral flexion, with respect to the L4-L5 ROM. Conclusions: An equation was proposed to obtain the ROM as a function of the elastic constants of the fibers and it may be used to facilitate the calibration process of the human spine segments and to understand the influence of each elastic constant on the ROM