Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites ldpe-al reinforced with fique fibers

Este estudio muestra el efecto de la incorporación de fibras naturales de fique en una matriz formada por polietileno de baja densidad y aluminio (LDPE-Al) obtenido en el proceso de reciclaje de envases Tetra Pak de larga duración. El contenido de refuerzo fue de 10, 20 y 30% de fibras, fabricadas m...

Full description

Autores:: Hidalgo Salazar, Miguel Ángel
Mina Hernández, José Herminsul
Munoz Aguilar, Mario F.

Tipo de recurso:: Article of journal

Fecha de publicación:: 2015

Institución:: Universidad Autónoma de Occidente

Repositorio:: RED: Repositorio Educativo Digital UAO

Idioma:: eng

id	REPOUAO2_6fc57aae1c5a99c4e087dc65999d0abe
oai_identifier_str	oai:red.uao.edu.co:10614/11884
network_acronym_str	REPOUAO2
network_name_str	RED: Repositorio Educativo Digital UAO
repository_id_str
dc.title.eng.fl_str_mv	Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites ldpe-al reinforced with fique fibers
title	Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites ldpe-al reinforced with fique fibers
spellingShingle	Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites ldpe-al reinforced with fique fibers Polietileno Materiales Fibras Materiales compuestos Polyethylene Fibers Composite materials
title_short	Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites ldpe-al reinforced with fique fibers
title_full	Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites ldpe-al reinforced with fique fibers
title_fullStr	Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites ldpe-al reinforced with fique fibers
title_full_unstemmed	Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites ldpe-al reinforced with fique fibers
title_sort	Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites ldpe-al reinforced with fique fibers
dc.creator.fl_str_mv	Hidalgo Salazar, Miguel Ángel Mina Hernández, José Herminsul Munoz Aguilar, Mario F.
dc.contributor.author.none.fl_str_mv	Hidalgo Salazar, Miguel Ángel Mina Hernández, José Herminsul Munoz Aguilar, Mario F.
dc.subject.armarc.spa.fl_str_mv	Polietileno Materiales Fibras Materiales compuestos
topic	Polietileno Materiales Fibras Materiales compuestos Polyethylene Fibers Composite materials
dc.subject.armarc.eng.fl_str_mv	Polyethylene Fibers Composite materials
description	Este estudio muestra el efecto de la incorporación de fibras naturales de fique en una matriz formada por polietileno de baja densidad y aluminio (LDPE-Al) obtenido en el proceso de reciclaje de envases Tetra Pak de larga duración. El contenido de refuerzo fue de 10, 20 y 30% de fibras, fabricadas mediante moldeo por compresión en caliente de tableros compuestos (LDPE-Al / fique). A partir del análisis termogravimétrico (TGA) se determinó que las proporciones del LDPE-Al fueron 75:25 p / p. Asimismo, se encontró que las partículas de aluminio aumentaron la rigidez del LDPE-Al, reduciendo la resistencia al impacto en comparación con LDPE reciclado de Tetra Pak sin aluminio; además de esto, la cristalinidad en el LDPE-Al aumentó con la presencia de aluminio, lo cual fue observado por calorimetría diferencial de barrido (DSC). La resistencia máxima y el módulo de Young a las propiedades de tracción y flexión aumentaron con la incorporación de las fibras, siendo este aumento una función directa de la cantidad de refuerzo contenido en el material. Finalmente, se identificó una reducción en la densidad del compuesto por la generación de huecos en la interfaz entre el LDPE-Al y las fibras de fique, y también hubo una mayor absorción de agua debido a la débil interfase fibra-matriz y las fibras hidrofílicas contenidas en el material.
publishDate	2015
dc.date.issued.none.fl_str_mv	2015
dc.date.accessioned.none.fl_str_mv	2020-02-13T17:11:32Z
dc.date.available.none.fl_str_mv	2020-02-13T17:11:32Z
dc.type.spa.fl_str_mv	Artículo de revista
dc.type.coar.fl_str_mv	http://purl.org/coar/resource_type/c_2df8fbb1
dc.type.coarversion.fl_str_mv	http://purl.org/coar/version/c_970fb48d4fbd8a85
dc.type.coar.eng.fl_str_mv	http://purl.org/coar/resource_type/c_6501
dc.type.content.eng.fl_str_mv	Text
dc.type.driver.eng.fl_str_mv	info:eu-repo/semantics/article
dc.type.redcol.eng.fl_str_mv	http://purl.org/redcol/resource_type/ARTREF
dc.type.version.eng.fl_str_mv	info:eu-repo/semantics/publishedVersion
format	http://purl.org/coar/resource_type/c_6501
status_str	publishedVersion
dc.identifier.uri.none.fl_str_mv	http://red.uao.edu.co//handle/10614/11884
url	http://red.uao.edu.co//handle/10614/11884
dc.language.iso.eng.fl_str_mv	eng
language	eng
dc.relation.eng.fl_str_mv	International Journal of Polymer Science. Volumen 2015
dc.relation.citationissue.none.fl_str_mv	ID 386325
dc.relation.citationvolume.none.fl_str_mv	2015
dc.relation.cites.spa.fl_str_mv	Hidalgo Salazar, M., Mina Hernández, J. H., Muñoz, M. F. (2015). Influence of Incorporation of Natural Fibers on the Physical, Mechanical, and Thermal Properties of Composites LDPE-Al Reinforced with Fique Fibers. International Journal of Polymer Science. 2015, (Article ID 386325),1- 8 .http://red.uao.edu.co//handle/10614/11884
dc.relation.ispartofjournal.eng.fl_str_mv	International Journal of Polymer Science
dc.relation.references.none.fl_str_mv	A. K. Bledzki and J. Gassan, “Composites reinforced with cellulose based fibres,” Progress in Polymer Science, vol. 24, no. 2, pp. 221–274, 1999. P. Wambua, J. Ivens, and I. Verpoest, “Natural fibres: can they replace glass in fibre-reinforced plastics?” Composites Science and Technology, vol. 63, no. 9, pp. 1259–1264, 2003. S. J. Eichhorn and R. J. Young, “Composite micromechanics of hemp fibres and epoxy resin microdroplets,” Composites Science and Technology, vol. 64, no. 5, pp. 767–772, 2004. S. V. Joshi, L. T. Drzal, A. K. Mohanty, and S. Arora, “Are natural fiber composites environmentally superior to glass fiber reinforced composites?” Composites Part A: Applied Science and Manufacturing, vol. 35, no. 3, pp. 371–376, 2004. M. Brahmakumar, C. Pavithran, and R. M. Pillai, “Coconut fibre reinforced polyethylene composites: effect of natural waxy surface layer of the fibre on fibre/matrix interfacial bonding and strength of composites,” Composites Science and Technology, vol. 65, no. 3-4, pp. 563–569, 2005. P. J. Herrera-Franco and A. Valadez-González, “A study of the mechanical properties of short natural-fiber reinforced composites,” Composites Part B: Engineering, vol. 36, no. 8, pp. 597–608, 2005. P. Gañán and I. Mondragon, “Fique fiber-reinforced polyester composites: effects of fiber surface treatments on mechanical behavior,” Journal of Materials Science, vol. 39, no. 9, pp. 3121–3128, 2004. M. A. Hidalgo, M. F. Muñoz, and K. J. Quintana, “Mechanical behavior of polyethylene aluminum composite reinforced with continuous agro fique fibers,” Revista Latinoamericana de Metalurgia y Materiales, vol. 31, no. 2, pp. 187–194, 2011. M. Hidalgo, M. Muñoz, and K. Quintana, “Mechanical analysis of polyethylene aluminum composite reinforced with short fique fibers available a in two-dimensional arrangement,” Revista Latinoamericana de Metalurgia y Materiales, vol. 32, no. 1, pp. 89–95, 2012. J. H. Mina, “Physico-mechanical characterization of thermoplastic cassava starch (TPS) and interfacial analysis with fique fibers,” Biotecnología en el Sector Agropecuario y Agroindustrial, vol. 10, pp. 99–109, 2012. M. F. Muñoz-Velez, M. A. Hidalgo-Salazar, and J. H. Mina-Hernandez, “Fique fiber an alternative for reinforced plastics. Influence of surface modification,” Biotecnología en el Sector Agropecuario y Agroindustrial, vol. 12, no. 2, pp. 60–70, 2014. F. L. Neves, “Reciclagem de embalagens cartonadas Tetra Pak,” O Papel, vol. 53, no. 2, pp. 38–45, 1999. A. L. Mourad, E. E. C. Garcia, G. B. Vilela, and F. von Zuben, “Influence of recycling rate increase of aseptic carton for long-life milk on GWP reduction,” Resources, Conservation and Recycling, vol. 52, no. 4, pp. 678–689, 2008. M. A. Hidalgo, J. H. Mina, and P. J. Herrera, “The effect of interfacial adhesion on the creep behaviour of LDPE-Al-Fique composite materials,” Composites Part B: Engineering, vol. 55, pp. 345–351, 2013. C. Guerrero, T. Lozano, V. Gonzales, and E. Arroyo, “Morfologia y propiedades de politereftalato de etilen-glicol y polietileno de alta densidad,” Ciencia UANL, vol. 6, no. 2, pp. 203–211, 2003. Y. Habibi, W. K. El-Zawawy, M. M. Ibrahim, and A. Dufresne, “Processing and characterization of reinforced polyethylene composites made with lignocellulosic fibers from Egyptian agro-industrial residues,” Composites Science and Technology, vol. 68, no. 7-8, pp. 1877–1885, 2008. C. Desiderá, Blendas de poliamida reciclada e polietileno proveniente da recuperação de embalagens multicamadas [PhD dissertation], Universidade Estadual de Campinas, 2007. K. Ghosh and S. N. Maiti, “Mechanical properties of silver-powder-filled polypropylene composites,” Journal of Applied Polymer Science, vol. 60, no. 3, pp. 323–331, 1996. A. Gungor, “The physical and mechanical properties of polymer composites filled with Fe powder,” Journal of Applied Polymer Science, vol. 99, no. 5, pp. 2438–2442, 2006. B. Bax and J. Müssig, “Impact and tensile properties of PLA/Cordenka and PLA/flax composites,” Composites Science and Technology, vol. 68, no. 7-8, pp. 1601–1607, 2008. M. E. Vallejos, Aprovechamiento integral del cannabis sativa como material de refuerzo /carga del polipropileno [Ph.D. thesis], Universitat de Girona, Girona, Spain, 2006. W. Wang, M. Sain, and P. A. Cooper, “Study of moisture absorption in natural fiber plastic composites,” Composites Science and Technology, vol. 66, no. 3-4, pp. 379–386, 2006. S. M. L. Rosa, E. F. Santos, C. A. Ferreira, and S. M. B. Nachtigalt, “Studies on the properties of rice-husk-filled-PP composites—effect of maleated PP,” Materials Research, vol. 12, no. 3, pp. 333–338, 2009. S. N. Monteiro, V. Calado, R. J. S. Rodriguez, and F. M. Margem, “Thermogravimetric behavior of natural fibers reinforced polymer composites—an overview,” Materials Science and Engineering A, vol. 557, no. 15, pp. 17–28, 2012. B. Tajeddin, R. A. Rahman, L. C. Abdulah, N. A. Ibrahim, and Y. A. Yusof, “Thermal properties of low density polyethylene—filled kenaf cellulose composites,” European Journal of Scientific Research, vol. 32, no. 2, pp. 223–230, 2009. C. M. A. Lopes and M. I. Felisberti, “Composite of low-density polyethylene and aluminum obtained from the recycling of postconsumer aseptic packaging,” Journal of Applied Polymer Science, vol. 101, no. 5, pp. 3183–3191, 2006. A. Stamboulis, C. Baillie, and E. Schulz, “Interfacial characterisation o flax fibre—thermoplastic polymer composites by the pull-out test,” in Proceedings of the 2nd International Wood and Natural Fibre Composites Symposium, Kassel, Germany, June 1999. P. Gañán and I. Mondragon, “Thermal and degradation behavior of fique fiber reinforced thermoplastic matrix composites,” Journal of Thermal Analysis and Calorimetry, vol. 73, no. 3, pp. 783–795, 2003. D. Aht-Ong and K. Charoenkongthum, “Thermal properties and moisture absorption of LDPE/banana starch biocomposite films,” Journal of Metals, Materials and Minerals, vol. 12, no. 1, pp. 1–10, 2002. A. Morales, D. Victoria, M. Ponce, and T. Lozano, “Materiales reforzados de poliolefinas recicladas y nanofibras de celulosa de henequén,” Revista Iberoamericana de Polímeros, vol. 12, no. 5, pp. 255–267, 2011. A. Amash and P. Zugenmaier, “Morphology and properties of isotropic and oriented samples of cellulose fibre-polypropylene composites,” Polymer, vol. 41, no. 4, pp. 1589–1596, 2000. T. N. Mtshali, I. Krupa, and A. S. Luyt, “The effect of cross-linking on the thermal properties of LDPE/wax blends,” Thermochimica Acta, vol. 380, no. 1, pp. 47–54, 2001. Q. Fu, Y. Men, and G. Strobl, “Understanding of the tensile deformation in HDPE/LDPE blends based on their crystal structure and phase morphology,” Polymer, vol. 44, no. 6, pp. 1927–1933, 2003.
dc.rights.spa.fl_str_mv	Derechos Reservados - Universidad Autónoma de Occidente
dc.rights.coar.fl_str_mv	http://purl.org/coar/access_right/c_abf2
dc.rights.uri.eng.fl_str_mv	https://creativecommons.org/licenses/by-nc-nd/4.0/
dc.rights.accessrights.eng.fl_str_mv	info:eu-repo/semantics/openAccess
dc.rights.creativecommons.spa.fl_str_mv	Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
rights_invalid_str_mv	Derechos Reservados - Universidad Autónoma de Occidente https://creativecommons.org/licenses/by-nc-nd/4.0/ Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0) http://purl.org/coar/access_right/c_abf2
eu_rights_str_mv	openAccess
dc.format.eng.fl_str_mv	application/pdf
dc.format.extent.spa.fl_str_mv	8 páginas
dc.coverage.spatial.none.fl_str_mv	Universidad Autónoma de Occidente. Calle 25 115-85. Km 2 vía Cali-Jamundí
dc.publisher.eng.fl_str_mv	Hindawi
institution	Universidad Autónoma de Occidente
bitstream.url.fl_str_mv	https://red.uao.edu.co/bitstreams/a849406e-4da0-4786-8de9-8d15407c430f/download https://red.uao.edu.co/bitstreams/74206215-caac-4921-9f4e-c84b959443ec/download https://red.uao.edu.co/bitstreams/17da1340-8fd7-43be-a108-70a68e4361f6/download https://red.uao.edu.co/bitstreams/ebfe956b-1eef-436b-bc5c-2f76deef90e0/download https://red.uao.edu.co/bitstreams/45fdcbb4-109b-42fc-9ef3-f80c90b1de68/download
bitstream.checksum.fl_str_mv	0b98ebdaf5813eb0cb573f6ecf3cdaf8 9085d60b24555ebfb26717d61877fa23 4460e5956bc1d1639be9ae6146a50347 20b5ba22b1117f71589c7318baa2c560 81239822cf752735b7c859060fd3c54c
bitstream.checksumAlgorithm.fl_str_mv	MD5 MD5 MD5 MD5 MD5
repository.name.fl_str_mv	Repositorio Digital Universidad Autonoma de Occidente
repository.mail.fl_str_mv	repositorio@uao.edu.co
_version_	1814260143356903424
spelling	Hidalgo Salazar, Miguel Ángelvirtual::2122-1Mina Hernández, José Herminsul0979fc3b30b6ce602bc72d24d90d7258Munoz Aguilar, Mario F.e9d08257af46e6f765a83440881765a5Universidad Autónoma de Occidente. Calle 25 115-85. Km 2 vía Cali-Jamundí2020-02-13T17:11:32Z2020-02-13T17:11:32Z2015http://red.uao.edu.co//handle/10614/11884Este estudio muestra el efecto de la incorporación de fibras naturales de fique en una matriz formada por polietileno de baja densidad y aluminio (LDPE-Al) obtenido en el proceso de reciclaje de envases Tetra Pak de larga duración. El contenido de refuerzo fue de 10, 20 y 30% de fibras, fabricadas mediante moldeo por compresión en caliente de tableros compuestos (LDPE-Al / fique). A partir del análisis termogravimétrico (TGA) se determinó que las proporciones del LDPE-Al fueron 75:25 p / p. Asimismo, se encontró que las partículas de aluminio aumentaron la rigidez del LDPE-Al, reduciendo la resistencia al impacto en comparación con LDPE reciclado de Tetra Pak sin aluminio; además de esto, la cristalinidad en el LDPE-Al aumentó con la presencia de aluminio, lo cual fue observado por calorimetría diferencial de barrido (DSC). La resistencia máxima y el módulo de Young a las propiedades de tracción y flexión aumentaron con la incorporación de las fibras, siendo este aumento una función directa de la cantidad de refuerzo contenido en el material. Finalmente, se identificó una reducción en la densidad del compuesto por la generación de huecos en la interfaz entre el LDPE-Al y las fibras de fique, y también hubo una mayor absorción de agua debido a la débil interfase fibra-matriz y las fibras hidrofílicas contenidas en el material.This study shows the effect of the incorporation of natural fique fibers in a matrix formed by low-density polyethylene and aluminum (LDPE-Al) obtained in the recycling process of long-life Tetra Pak packaging. The reinforcement content was 10, 20, and 30% fibers, manufactured by hot-press compression molding of composite boards (LDPE-Al/fique). From the thermogravimetric analysis (TGA) it was determined that the proportions of the LDPE-Al were 75 : 25 w/w. Likewise, it was found that the aluminum particles increased the rigidity of the LDPE-Al, reducing the impact strength compared to LDPE recycled from Tetra Pak without aluminum; besides this, the crystallinity in the LDPE-Al increased with the presence of aluminum, which was observed by differential scanning calorimetry (DSC). The maximum strength and Young’s modulus to tensile and flexural properties increased with the incorporation of the fibers, this increase being a direct function of the amount of reinforcement contained in the material. Finally, a reduction in the density of the compound by the generation of voids at the interface between the LDPE-Al and fique fibers was identified, and there was also a greater water absorption due to weak interphase fiber-matrix and the hydrophilic fibers contained in the material.application/pdf8 páginasengHindawiInternational Journal of Polymer Science. Volumen 2015ID 3863252015Hidalgo Salazar, M., Mina Hernández, J. H., Muñoz, M. F. (2015). Influence of Incorporation of Natural Fibers on the Physical, Mechanical, and Thermal Properties of Composites LDPE-Al Reinforced with Fique Fibers. International Journal of Polymer Science. 2015, (Article ID 386325),1- 8 .http://red.uao.edu.co//handle/10614/11884International Journal of Polymer ScienceA. K. Bledzki and J. Gassan, “Composites reinforced with cellulose based fibres,” Progress in Polymer Science, vol. 24, no. 2, pp. 221–274, 1999.P. Wambua, J. Ivens, and I. Verpoest, “Natural fibres: can they replace glass in fibre-reinforced plastics?” Composites Science and Technology, vol. 63, no. 9, pp. 1259–1264, 2003.S. J. Eichhorn and R. J. Young, “Composite micromechanics of hemp fibres and epoxy resin microdroplets,” Composites Science and Technology, vol. 64, no. 5, pp. 767–772, 2004.S. V. Joshi, L. T. Drzal, A. K. Mohanty, and S. Arora, “Are natural fiber composites environmentally superior to glass fiber reinforced composites?” Composites Part A: Applied Science and Manufacturing, vol. 35, no. 3, pp. 371–376, 2004.M. Brahmakumar, C. Pavithran, and R. M. Pillai, “Coconut fibre reinforced polyethylene composites: effect of natural waxy surface layer of the fibre on fibre/matrix interfacial bonding and strength of composites,” Composites Science and Technology, vol. 65, no. 3-4, pp. 563–569, 2005.P. J. Herrera-Franco and A. Valadez-González, “A study of the mechanical properties of short natural-fiber reinforced composites,” Composites Part B: Engineering, vol. 36, no. 8, pp. 597–608, 2005.P. Gañán and I. Mondragon, “Fique fiber-reinforced polyester composites: effects of fiber surface treatments on mechanical behavior,” Journal of Materials Science, vol. 39, no. 9, pp. 3121–3128, 2004.M. A. Hidalgo, M. F. Muñoz, and K. J. Quintana, “Mechanical behavior of polyethylene aluminum composite reinforced with continuous agro fique fibers,” Revista Latinoamericana de Metalurgia y Materiales, vol. 31, no. 2, pp. 187–194, 2011.M. Hidalgo, M. Muñoz, and K. Quintana, “Mechanical analysis of polyethylene aluminum composite reinforced with short fique fibers available a in two-dimensional arrangement,” Revista Latinoamericana de Metalurgia y Materiales, vol. 32, no. 1, pp. 89–95, 2012.J. H. Mina, “Physico-mechanical characterization of thermoplastic cassava starch (TPS) and interfacial analysis with fique fibers,” Biotecnología en el Sector Agropecuario y Agroindustrial, vol. 10, pp. 99–109, 2012.M. F. Muñoz-Velez, M. A. Hidalgo-Salazar, and J. H. Mina-Hernandez, “Fique fiber an alternative for reinforced plastics. Influence of surface modification,” Biotecnología en el Sector Agropecuario y Agroindustrial, vol. 12, no. 2, pp. 60–70, 2014.F. L. Neves, “Reciclagem de embalagens cartonadas Tetra Pak,” O Papel, vol. 53, no. 2, pp. 38–45, 1999.A. L. Mourad, E. E. C. Garcia, G. B. Vilela, and F. von Zuben, “Influence of recycling rate increase of aseptic carton for long-life milk on GWP reduction,” Resources, Conservation and Recycling, vol. 52, no. 4, pp. 678–689, 2008.M. A. Hidalgo, J. H. Mina, and P. J. Herrera, “The effect of interfacial adhesion on the creep behaviour of LDPE-Al-Fique composite materials,” Composites Part B: Engineering, vol. 55, pp. 345–351, 2013.C. Guerrero, T. Lozano, V. Gonzales, and E. Arroyo, “Morfologia y propiedades de politereftalato de etilen-glicol y polietileno de alta densidad,” Ciencia UANL, vol. 6, no. 2, pp. 203–211, 2003.Y. Habibi, W. K. El-Zawawy, M. M. Ibrahim, and A. Dufresne, “Processing and characterization of reinforced polyethylene composites made with lignocellulosic fibers from Egyptian agro-industrial residues,” Composites Science and Technology, vol. 68, no. 7-8, pp. 1877–1885, 2008.C. Desiderá, Blendas de poliamida reciclada e polietileno proveniente da recuperação de embalagens multicamadas [PhD dissertation], Universidade Estadual de Campinas, 2007.K. Ghosh and S. N. Maiti, “Mechanical properties of silver-powder-filled polypropylene composites,” Journal of Applied Polymer Science, vol. 60, no. 3, pp. 323–331, 1996.A. Gungor, “The physical and mechanical properties of polymer composites filled with Fe powder,” Journal of Applied Polymer Science, vol. 99, no. 5, pp. 2438–2442, 2006.B. Bax and J. Müssig, “Impact and tensile properties of PLA/Cordenka and PLA/flax composites,” Composites Science and Technology, vol. 68, no. 7-8, pp. 1601–1607, 2008.M. E. Vallejos, Aprovechamiento integral del cannabis sativa como material de refuerzo /carga del polipropileno [Ph.D. thesis], Universitat de Girona, Girona, Spain, 2006.W. Wang, M. Sain, and P. A. Cooper, “Study of moisture absorption in natural fiber plastic composites,” Composites Science and Technology, vol. 66, no. 3-4, pp. 379–386, 2006.S. M. L. Rosa, E. F. Santos, C. A. Ferreira, and S. M. B. Nachtigalt, “Studies on the properties of rice-husk-filled-PP composites—effect of maleated PP,” Materials Research, vol. 12, no. 3, pp. 333–338, 2009.S. N. Monteiro, V. Calado, R. J. S. Rodriguez, and F. M. Margem, “Thermogravimetric behavior of natural fibers reinforced polymer composites—an overview,” Materials Science and Engineering A, vol. 557, no. 15, pp. 17–28, 2012.B. Tajeddin, R. A. Rahman, L. C. Abdulah, N. A. Ibrahim, and Y. A. Yusof, “Thermal properties of low density polyethylene—filled kenaf cellulose composites,” European Journal of Scientific Research, vol. 32, no. 2, pp. 223–230, 2009.C. M. A. Lopes and M. I. Felisberti, “Composite of low-density polyethylene and aluminum obtained from the recycling of postconsumer aseptic packaging,” Journal of Applied Polymer Science, vol. 101, no. 5, pp. 3183–3191, 2006.A. Stamboulis, C. Baillie, and E. Schulz, “Interfacial characterisation o flax fibre—thermoplastic polymer composites by the pull-out test,” in Proceedings of the 2nd International Wood and Natural Fibre Composites Symposium, Kassel, Germany, June 1999.P. Gañán and I. Mondragon, “Thermal and degradation behavior of fique fiber reinforced thermoplastic matrix composites,” Journal of Thermal Analysis and Calorimetry, vol. 73, no. 3, pp. 783–795, 2003.D. Aht-Ong and K. Charoenkongthum, “Thermal properties and moisture absorption of LDPE/banana starch biocomposite films,” Journal of Metals, Materials and Minerals, vol. 12, no. 1, pp. 1–10, 2002.A. Morales, D. Victoria, M. Ponce, and T. Lozano, “Materiales reforzados de poliolefinas recicladas y nanofibras de celulosa de henequén,” Revista Iberoamericana de Polímeros, vol. 12, no. 5, pp. 255–267, 2011.A. Amash and P. Zugenmaier, “Morphology and properties of isotropic and oriented samples of cellulose fibre-polypropylene composites,” Polymer, vol. 41, no. 4, pp. 1589–1596, 2000.T. N. Mtshali, I. Krupa, and A. S. Luyt, “The effect of cross-linking on the thermal properties of LDPE/wax blends,” Thermochimica Acta, vol. 380, no. 1, pp. 47–54, 2001.Q. Fu, Y. Men, and G. Strobl, “Understanding of the tensile deformation in HDPE/LDPE blends based on their crystal structure and phase morphology,” Polymer, vol. 44, no. 6, pp. 1927–1933, 2003.Derechos Reservados - Universidad Autónoma de Occidentehttps://creativecommons.org/licenses/by-nc-nd/4.0/info:eu-repo/semantics/openAccessAtribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)http://purl.org/coar/access_right/c_abf2Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites ldpe-al reinforced with fique fibersArtículo de revistahttp://purl.org/coar/resource_type/c_6501http://purl.org/coar/resource_type/c_2df8fbb1Textinfo:eu-repo/semantics/articlehttp://purl.org/redcol/resource_type/ARTREFinfo:eu-repo/semantics/publishedVersionhttp://purl.org/coar/version/c_970fb48d4fbd8a85PolietilenoMaterialesFibrasMateriales compuestosPolyethyleneFibersComposite materialsPublication00f13bbf-fd1b-4026-8c93-f94105cbaa85virtual::2122-100f13bbf-fd1b-4026-8c93-f94105cbaa85virtual::2122-1https://scholar.google.es/citations?user=OTNvAeoAAAAJ&hl=esvirtual::2122-10000-0002-6907-2091virtual::2122-1https://scienti.minciencias.gov.co/cvlac/visualizador/generarCurriculoCv.do?cod_rh=0000143936virtual::2122-1TEXTA0253_Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites LDPE-Al reinforced with fique fibers.pdf.txtA0253_Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites LDPE-Al reinforced with fique fibers.pdf.txtExtracted texttext/plain36842https://red.uao.edu.co/bitstreams/a849406e-4da0-4786-8de9-8d15407c430f/download0b98ebdaf5813eb0cb573f6ecf3cdaf8MD57THUMBNAILA0253_Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites LDPE-Al reinforced with fique fibers.pdf.jpgA0253_Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites LDPE-Al reinforced with fique fibers.pdf.jpgGenerated Thumbnailimage/jpeg14516https://red.uao.edu.co/bitstreams/74206215-caac-4921-9f4e-c84b959443ec/download9085d60b24555ebfb26717d61877fa23MD58CC-LICENSElicense_rdflicense_rdfapplication/rdf+xml; charset=utf-8805https://red.uao.edu.co/bitstreams/17da1340-8fd7-43be-a108-70a68e4361f6/download4460e5956bc1d1639be9ae6146a50347MD52LICENSElicense.txtlicense.txttext/plain; charset=utf-81665https://red.uao.edu.co/bitstreams/ebfe956b-1eef-436b-bc5c-2f76deef90e0/download20b5ba22b1117f71589c7318baa2c560MD53ORIGINALA0253_Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites LDPE-Al reinforced with fique fibers.pdfA0253_Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites LDPE-Al reinforced with fique fibers.pdfTexto archivo completo del artículo de revista, PDFapplication/pdf2877643https://red.uao.edu.co/bitstreams/45fdcbb4-109b-42fc-9ef3-f80c90b1de68/download81239822cf752735b7c859060fd3c54cMD5410614/11884oai:red.uao.edu.co:10614/118842024-03-06 09:37:57.785https://creativecommons.org/licenses/by-nc-nd/4.0/Derechos Reservados - Universidad Autónoma de Occidenteopen.accesshttps://red.uao.edu.coRepositorio Digital Universidad Autonoma de Occidenterepositorio@uao.edu.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

Influence of incorporation of natural fibers on the physical, mechanical, and thermal properties of composites ldpe-al reinforced with fique fibers

Publicaciones similares