Methodology for manufacturing cranial implants from DICOM images and CAD/CAM/CNC technologies

This article proposes a methodology for the design and manufacture of cranial implants from DICOM images and CAD / CAM / CNC technologies. This methodology is based on the Computerized Axial Tomography (CT) of the patient's head, with which the three-dimensional reconstruction of the skull is c...

Full description

Autores:
Rodríguez López, Carlos
López, Iván
Sierra, Alejandro
Maya, Jairo
Tipo de recurso:
Fecha de publicación:
2005
Institución:
Universidad EAFIT
Repositorio:
Repositorio EAFIT
Idioma:
spa
OAI Identifier:
oai:repository.eafit.edu.co:10784/14571
Acceso en línea:
http://hdl.handle.net/10784/14571
Palabra clave:
Skull Implant
Cad / Cam / Cnc Systems
Dicom
Implante De Cráneo
Sistemas Cad/Cam/Cnc
Dicom
Rights
License
Copyright (c) 2005 Carlos Rodríguez López, Iván López, Alejandro Sierra, Jairo Maya
id REPOEAFIT2_a25bf10a651beee8d86dd84ff5e43bf6
oai_identifier_str oai:repository.eafit.edu.co:10784/14571
network_acronym_str REPOEAFIT2
network_name_str Repositorio EAFIT
repository_id_str
spelling Medellín de: Lat: 06 15 00 N degrees minutes Lat: 6.2500 decimal degrees Long: 075 36 00 W degrees minutes Long: -75.6000 decimal degrees2005-12-012019-11-22T19:22:14Z2005-12-012019-11-22T19:22:14Z2256-43141794-9165http://hdl.handle.net/10784/14571This article proposes a methodology for the design and manufacture of cranial implants from DICOM images and CAD / CAM / CNC technologies. This methodology is based on the Computerized Axial Tomography (CT) of the patient's head, with which the three-dimensional reconstruction of the skull is carried out. Then, in the CAD system the implant is reconstructed by varying the technique used depending on the region of the skull with defect or trauma. Once the model is obtained, the assembly is designed and the implant is manufactured with support in CAM / CNC technology.El presente artículo propone una metodología para el diseño y la fabricación de implantes craneales a partir de imágenes DICOM y tecnologías CAD/CAM/CNC. Esta metodología parte de las Tomografías Axiales Computarizadas (TAC) de la cabeza del paciente, con las cuales se lleva a cabo la reconstrucción tridimensional del cráneo. Luego, en el sistema CAD se reconstruye el implante variando la técnica empleada dependiendo de la región del cráneo con defecto o trauma. Una vez obtenido el modelo, se diseña el montaje y se fabrica el implante con soporte en tecnología CAM/CNC.application/pdfspaUniversidad EAFIThttp://publicaciones.eafit.edu.co/index.php/ingciencia/article/view/495http://publicaciones.eafit.edu.co/index.php/ingciencia/article/view/495Copyright (c) 2005 Carlos Rodríguez López, Iván López, Alejandro Sierra, Jairo MayaAcceso abiertohttp://purl.org/coar/access_right/c_abf2instname:Universidad EAFITreponame:Repositorio Institucional Universidad EAFITIngeniería y Ciencia; Vol 1, No 2 (2005)Methodology for manufacturing cranial implants from DICOM images and CAD/CAM/CNC technologiesMetodología para la manufactura de implantes craneales a partir de imágenes DICOM y tecnologías CAD/CAM/CNCarticleinfo:eu-repo/semantics/articlepublishedVersioninfo:eu-repo/semantics/publishedVersionArtículohttp://purl.org/coar/version/c_970fb48d4fbd8a85http://purl.org/coar/resource_type/c_6501http://purl.org/coar/resource_type/c_2df8fbb1Skull ImplantCad / Cam / Cnc SystemsDicomImplante De CráneoSistemas Cad/Cam/CncDicomRodríguez López, Carlosedea04d4-3c10-462a-9364-c38905bfd8f9-1López, Iván6b1acc34-c0ee-46d4-9c6e-f935ae7f2954-1Sierra, Alejandroc4fde713-7ca8-4860-ac5a-a0222b8fd2cf-1Maya, Jairo413dd85e-cc74-4063-9e8b-82ede970dd87-1Universidad EAFITUniversidad EAFITRepresentaciones C.G.S.A.Universidad EAFITIngeniería y Ciencia125366ing.cienc.THUMBNAILminaitura-ig_Mesa de trabajo 1.jpgminaitura-ig_Mesa de trabajo 1.jpgimage/jpeg265796https://repository.eafit.edu.co/bitstreams/e08fa56d-3ca0-4103-a997-6121a273f674/downloadda9b21a5c7e00c7f1127cef8e97035e0MD51ORIGINALdocument (2).pdfdocument (2).pdfTexto completo PDFapplication/pdf293010https://repository.eafit.edu.co/bitstreams/8d627b32-0975-46e9-b71e-f361e54c653d/download269f901469a1865a3f7cc1e342dd6d32MD52articulo.htmlarticulo.htmlTexto completo HTMLtext/html373https://repository.eafit.edu.co/bitstreams/e2e4c196-3e8e-4154-b6fa-0661738bafa8/downloadfe6367d4ff001d828e156ba509dc07b4MD5310784/14571oai:repository.eafit.edu.co:10784/145712024-12-04 11:49:53.19open.accesshttps://repository.eafit.edu.coRepositorio Institucional Universidad EAFITrepositorio@eafit.edu.co
dc.title.eng.fl_str_mv Methodology for manufacturing cranial implants from DICOM images and CAD/CAM/CNC technologies
dc.title.spa.fl_str_mv Metodología para la manufactura de implantes craneales a partir de imágenes DICOM y tecnologías CAD/CAM/CNC
title Methodology for manufacturing cranial implants from DICOM images and CAD/CAM/CNC technologies
spellingShingle Methodology for manufacturing cranial implants from DICOM images and CAD/CAM/CNC technologies
Skull Implant
Cad / Cam / Cnc Systems
Dicom
Implante De Cráneo
Sistemas Cad/Cam/Cnc
Dicom
title_short Methodology for manufacturing cranial implants from DICOM images and CAD/CAM/CNC technologies
title_full Methodology for manufacturing cranial implants from DICOM images and CAD/CAM/CNC technologies
title_fullStr Methodology for manufacturing cranial implants from DICOM images and CAD/CAM/CNC technologies
title_full_unstemmed Methodology for manufacturing cranial implants from DICOM images and CAD/CAM/CNC technologies
title_sort Methodology for manufacturing cranial implants from DICOM images and CAD/CAM/CNC technologies
dc.creator.fl_str_mv Rodríguez López, Carlos
López, Iván
Sierra, Alejandro
Maya, Jairo
dc.contributor.author.spa.fl_str_mv Rodríguez López, Carlos
López, Iván
Sierra, Alejandro
Maya, Jairo
dc.contributor.affiliation.spa.fl_str_mv Universidad EAFIT
Universidad EAFIT
Representaciones C.G.S.A.
Universidad EAFIT
dc.subject.keyword.eng.fl_str_mv Skull Implant
Cad / Cam / Cnc Systems
Dicom
topic Skull Implant
Cad / Cam / Cnc Systems
Dicom
Implante De Cráneo
Sistemas Cad/Cam/Cnc
Dicom
dc.subject.keyword.spa.fl_str_mv Implante De Cráneo
Sistemas Cad/Cam/Cnc
Dicom
description This article proposes a methodology for the design and manufacture of cranial implants from DICOM images and CAD / CAM / CNC technologies. This methodology is based on the Computerized Axial Tomography (CT) of the patient's head, with which the three-dimensional reconstruction of the skull is carried out. Then, in the CAD system the implant is reconstructed by varying the technique used depending on the region of the skull with defect or trauma. Once the model is obtained, the assembly is designed and the implant is manufactured with support in CAM / CNC technology.
publishDate 2005
dc.date.issued.none.fl_str_mv 2005-12-01
dc.date.available.none.fl_str_mv 2019-11-22T19:22:14Z
dc.date.accessioned.none.fl_str_mv 2019-11-22T19:22:14Z
dc.date.none.fl_str_mv 2005-12-01
dc.type.eng.fl_str_mv article
info:eu-repo/semantics/article
publishedVersion
info:eu-repo/semantics/publishedVersion
dc.type.coarversion.fl_str_mv http://purl.org/coar/version/c_970fb48d4fbd8a85
dc.type.coar.fl_str_mv http://purl.org/coar/resource_type/c_6501
http://purl.org/coar/resource_type/c_2df8fbb1
dc.type.local.spa.fl_str_mv Artículo
status_str publishedVersion
dc.identifier.issn.none.fl_str_mv 2256-4314
1794-9165
dc.identifier.uri.none.fl_str_mv http://hdl.handle.net/10784/14571
identifier_str_mv 2256-4314
1794-9165
url http://hdl.handle.net/10784/14571
dc.language.iso.spa.fl_str_mv spa
language spa
dc.relation.isversionof.none.fl_str_mv http://publicaciones.eafit.edu.co/index.php/ingciencia/article/view/495
dc.relation.uri.none.fl_str_mv http://publicaciones.eafit.edu.co/index.php/ingciencia/article/view/495
dc.rights.eng.fl_str_mv Copyright (c) 2005 Carlos Rodríguez López, Iván López, Alejandro Sierra, Jairo Maya
dc.rights.coar.fl_str_mv http://purl.org/coar/access_right/c_abf2
dc.rights.local.spa.fl_str_mv Acceso abierto
rights_invalid_str_mv Copyright (c) 2005 Carlos Rodríguez López, Iván López, Alejandro Sierra, Jairo Maya
Acceso abierto
http://purl.org/coar/access_right/c_abf2
dc.format.none.fl_str_mv application/pdf
dc.coverage.spatial.eng.fl_str_mv Medellín de: Lat: 06 15 00 N degrees minutes Lat: 6.2500 decimal degrees Long: 075 36 00 W degrees minutes Long: -75.6000 decimal degrees
dc.publisher.spa.fl_str_mv Universidad EAFIT
dc.source.none.fl_str_mv instname:Universidad EAFIT
reponame:Repositorio Institucional Universidad EAFIT
dc.source.spa.fl_str_mv Ingeniería y Ciencia; Vol 1, No 2 (2005)
instname_str Universidad EAFIT
institution Universidad EAFIT
reponame_str Repositorio Institucional Universidad EAFIT
collection Repositorio Institucional Universidad EAFIT
bitstream.url.fl_str_mv https://repository.eafit.edu.co/bitstreams/e08fa56d-3ca0-4103-a997-6121a273f674/download
https://repository.eafit.edu.co/bitstreams/8d627b32-0975-46e9-b71e-f361e54c653d/download
https://repository.eafit.edu.co/bitstreams/e2e4c196-3e8e-4154-b6fa-0661738bafa8/download
bitstream.checksum.fl_str_mv da9b21a5c7e00c7f1127cef8e97035e0
269f901469a1865a3f7cc1e342dd6d32
fe6367d4ff001d828e156ba509dc07b4
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
MD5
repository.name.fl_str_mv Repositorio Institucional Universidad EAFIT
repository.mail.fl_str_mv repositorio@eafit.edu.co
_version_ 1818102429467541504

Publicaciones similares