Método de cálculo para la determinación de las tensiones en volantes de rayos rectos
This research deepens on the methods to the solution of the hyper static systems applicable for the assessment resistance of flywheels which are applied to a flywheel of a hammer mill. The results of the analytical methods were validated through a Finite Element Analysis, the results show difference...
- Autores:
-
Mendoza Fernández, Abdel
Goytisolo Espinosa, Rafael
Cabello Eras, Juan Jose
Jiménez Borges, Reinier
- Tipo de recurso:
- Article of journal
- Fecha de publicación:
- 2018
- Institución:
- Corporación Universidad de la Costa
- Repositorio:
- REDICUC - Repositorio CUC
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.cuc.edu.co:11323/4676
- Acceso en línea:
- https://hdl.handle.net/11323/4676
https://repositorio.cuc.edu.co/
- Palabra clave:
- Equivalent stress
Flywheel
Hyper static systems
Rays
Rim
Sistemas hiperestáticos
Tensiones equivalentes
Volantes
Llanta
Rayos
- Rights
- openAccess
- License
- Attribution-NonCommercial-ShareAlike 4.0 International
Summary: | This research deepens on the methods to the solution of the hyper static systems applicable for the assessment resistance of flywheels which are applied to a flywheel of a hammer mill. The results of the analytical methods were validated through a Finite Element Analysis, the results show differences minors than 10%. The equivalent strength in the rim is almost zero in the middle plane of the beam and increases as it moves away from it, and remains constant throughout the rays. It was also observed that in all the studied cases the equivalent tension decreases when the number of rays increases because of the flywheels stiffness increases. Also, graphics tools are obtained to a fast determination of the equivalent tension in the rim according to the number of rays and the speed of operation. |
---|