Diseño de un banco de pruebas de aceptación en fábrica (FAT) para la empresa APSI S.A.S. con evaluación de aplicabilidad en la Universidad de la Costa

This project presents the design of a FAT test bench, coherent with the needs and requirements of a pilot company, APSI S.A.S in this company i worked as a project engineer during my university internship, during this period i was able to detect repetitive inconveniences that arose at the time of performing FAT tests, which would be solved with the implementation of an adequate space with the elements required for its realization. The study is based on a sample of projects carried out by the company and that have been tested. This analysis allows to identify the objectives and requirements of the tests, equipment under test, equipment that intervened and other tools and elements used for each test; the above with the final purpose to determine the requirements that must be taken into account in the design. to determine the requirements that must be taken into account in the design. In addition, the applicability of the implementation of the FAT test bench designed at the University of the Coast is evaluated. The FAT test bench facilitates the creation of work environments during laboratory practices carried out by the student, bringing them closer to a realistic environment in front of their profession.

• Autores: Guerrero Cogollo, Virginia Del Carmen
• Tipo de recurso: Trabajo de grado de pregrado
• Fecha de publicación: 2020
• Institución: Corporación Universidad de la Costa
• Repositorio: REDICUC - Repositorio CUC
• Idioma: spa
• OAI Identifier: oai:repositorio.cuc.edu.co:11323/6334
• Acceso en línea: https://hdl.handle.net/11323/6334; https://repositorio.cuc.edu.co/
• Palabra clave: FAT; Detection; Test; Requirements; FAT; Detección; Prueba; Requisitos
• Rights: openAccess
• License: http://creativecommons.org/licenses/by-nc-sa/4.0/