Implementation of a cost-effective fuzzy MPPT controller on the Arduino board
This paper presents the implementation of a fuzzy controller on the Arduino Mega board, for tracking the maximum power point of a photovoltaic (PV) module; using low cost materials. A dc-dc converter that incorporates a driver circuit to control the turning on and offof the Mosfet transistor was des...
- Autores:
-
Robles Algarin, Carlos Arturo
Liñán Fuentes, Roberto
Ospino Castro, Adalberto Jose
- Tipo de recurso:
- Article of journal
- Fecha de publicación:
- 2018
- Institución:
- Corporación Universidad de la Costa
- Repositorio:
- REDICUC - Repositorio CUC
- Idioma:
- eng
- OAI Identifier:
- oai:repositorio.cuc.edu.co:11323/4683
- Acceso en línea:
- http://hdl.handle.net/11323/4683
https://repositorio.cuc.edu.co/
- Palabra clave:
- Arduino mega
Dc-dc converter
Fuzzy logic
MPPT controller
Photovoltaic module
Mega arduino
Convertidor dc-dc
Lógica difusa
Controlador MPPT
Módulo fotovoltaico
- Rights
- openAccess
- License
- Attribution-NonCommercial-ShareAlike 4.0 International
| Summary: | This paper presents the implementation of a fuzzy controller on the Arduino Mega board, for tracking the maximum power point of a photovoltaic (PV) module; using low cost materials. A dc-dc converter that incorporates a driver circuit to control the turning on and offof the Mosfet transistor was designed. The controller was evaluated in a PV system consisting of a 65 W PV module and a 12 V/55Ah battery. The results demonstrate the superiority of the fuzzy controller compared to the traditional P & O algorithm, in terms of efficiency and oscillations around the operating point. |
|---|