Evaluación de la resistencia y rigidez del Alto Despeje del tractor YUMZ - 6M fabricado en el Taller T - 15 del MINAZ

The Degree Project was developed in the MINAZ Workshop T-15, where the High Front and Rear Clearances of the YUMZ-6M Tractors are manufactured and repaired and precisely includes the Evaluation of the resistance and rigidity of these elements. The work is divided into three chapters. In the first chapter the Company is characterized in General and in particular the Workshop T-15 where the work was carried out. In the second chapter the YUMZ-6M Tractor and the High Front and Rear Clearances are characterized and some indications were elaborated for the maintenance of the High Clearances that did not exist. In the third chapter the calculations of the dynamic load coefficients are performed and the stiffness and strength of both High Clearances are evaluated and the use of a stiffener bar is proposed that connects them taking advantage of the resistance and rigidity of the High Rear Clearance to raise the Forward.

• Autores: Villa Ramos, Leodelcys
• Tipo de recurso: Trabajo de grado de pregrado
• Fecha de publicación: 2005
• Institución: Corporación Universidad de la Costa
• Repositorio: REDICUC - Repositorio CUC
• Idioma: spa
• OAI Identifier: oai:repositorio.cuc.edu.co:11323/1234
• Acceso en línea: https://hdl.handle.net/11323/1234; https://repositorio.cuc.edu.co/
• Palabra clave: Reparación de tractores; Tractor YUMZ-6M; Altos Despejes Delantero y Trasero; High Clearances Front and Rear; Repair of tractors
• Rights: openAccess
• License: Atribución – No comercial – Compartir igual