Adsorptive desulfurization properties of refractory sulfur compounds onto Al2O3-Ga2O3 nanomaterials

The impact of the synthesis method on the structural, textural, and surface properties of the Al2O3-Ga2O3 sample was investigated, and the adsorbents were evaluated for their adsorptive desulfurization properties. The incorporation of Ga atoms into the Al2O3 framework (via SGM) resulted in an increa...

Full description

Autores:
Puello-Polo, Esneyder
Checca Huaman, Noemi Raquel
López, Elvis O.
Toloza Toloza, Carlos
Méndez, Franklin J.
Tipo de recurso:
Article of investigation
Fecha de publicación:
2023
Institución:
Corporación Universidad de la Costa
Repositorio:
REDICUC - Repositorio CUC
Idioma:
eng
OAI Identifier:
oai:repositorio.cuc.edu.co:11323/13317
Acceso en línea:
https://hdl.handle.net/11323/13317
https://repositorio.cuc.edu.co/
Palabra clave:
Adsorptive desulfurization
Alumina
Benzothiophene
Dibenzothiophene
Gallium
Impregnation
Sol-gel
Rights
embargoedAccess
License
Atribución-NoComercial-SinDerivadas 4.0 Internacional (CC BY-NC-ND 4.0)
Description
Summary:The impact of the synthesis method on the structural, textural, and surface properties of the Al2O3-Ga2O3 sample was investigated, and the adsorbents were evaluated for their adsorptive desulfurization properties. The incorporation of Ga atoms into the Al2O3 framework (via SGM) resulted in an increase in specific surface area and pore volume, but a decrease in average pore size. XRF analysis confirmed Ga loading, while SEM-EDS and STEM-EDS techniques revealed well-distributed elements with irregular spherical morphologies. XRD diffractograms confirmed the formation of γ-Al2O3, with a slight shift of diffraction peaks due to the presence of Ga (via SGM), suggesting that Ga atoms are part of the structure. The obtained solids exhibit values in the Freundlich equation that indicate a degree of nonlinearity in adsorption for Al2O3, while Al2O3-Ga2O3(SGM) and Al2O3-Ga2O3(IM) suggest a possible chemical process and favorable adsorption. The small KF values demonstrate weak adsorption on the adsorbents, which can be explained by sulfur-to-metal interaction, π-complexation, and non-specific interactions such as Van der Waals forces. The adsorbent showed the greatest affinity for BT and the least for DBT. The selectivity order from strongest to weakest adsorption was BT: Al2O3-Ga2O3(SGM) > Al2O3-Ga2O3(IM) > Al2O3, and DBT: Al2O3-Ga2O3(IM) > Al2O3-Ga2O3(SGM) > Al2O3.