Effect of grain size distribution on california bearing ratio (CBR) and modified proctor parameters for granular materials

The California bearing ratio (CBR) and modified proctor parameters (maximum dry unit weight γd(max)γd(max) and optimum moisture content woptwopt) are valuable indicators of the compaction quality of subgrades, embankments and granular fills. In the engineering practice, correlations of these variabl...

Full description

Autores:
Duque, Jose
Fuentes, William
Rey, Silvia
Molina, Enois
Tipo de recurso:
Article of journal
Fecha de publicación:
2020
Institución:
Corporación Universidad de la Costa
Repositorio:
REDICUC - Repositorio CUC
Idioma:
eng
OAI Identifier:
oai:repositorio.cuc.edu.co:11323/7820
Acceso en línea:
https://hdl.handle.net/11323/7820
https://doi.org/10.1007/s13369-020-04673-6
https://repositorio.cuc.edu.co/
Palabra clave:
California bearing ratio (CBR)
Grain size distribution
Modified proctor
Granular soils
Rights
openAccess
License
Attribution-NonCommercial-NoDerivatives 4.0 International
Description
Summary:The California bearing ratio (CBR) and modified proctor parameters (maximum dry unit weight γd(max)γd(max) and optimum moisture content woptwopt) are valuable indicators of the compaction quality of subgrades, embankments and granular fills. In the engineering practice, correlations of these variables with granulometric properties of the soil are required, especially since testing for these variables can be time-consuming when a large number of samples are analyzed. In this work, 20 different granular materials with varying grain size distributions were prepared and tested. Their grain size distribution properties and their parameters CBR, γd(max)γd(max) and woptwopt were determined. These results were analyzed along with a compilation of 77 additional experimental results on granular materials reported in the literature. The influence of some granulometric properties on the parameters CBR, γd(max)γd(max) and woptwopt was statistically examined, and some correlations were proposed for these variables. Subsequently, it was demonstrated that the proposed correlations show better accuracy tother reported correlations in the literature. Finally, this work ends with some concluding remarks.