Transformation of residual açai fruit (Euterpe oleracea) seeds into porous adsorbent for efficient removal of 2,4-dichlorophenoxyacetic acid herbicide from waters

Brazil’s production and consumption of açai pulp (Euterpe oleracea) occur on a large scale. Most of the fruit is formed by the pit, which generates countless tons of residual biomass. A new purpose for this biomass, making its consumption highly sustainable, was presented in this study, where activa...

Full description

Autores:: Ramírez, Rolando
Schnorr, Carlos Eduardo
georgin, jordana
Schadeck Netto, Matias
Dison S.P., Franco
Carissimi, Elvis
Wolff, Delmira
Silva Oliveira, Luis Felipe
Dotto, Guilherme Luiz

Tipo de recurso:: Article of investigation

Fecha de publicación:: 2022

Institución:: Corporación Universidad de la Costa

Repositorio:: REDICUC - Repositorio CUC

Idioma:: eng

Description
Summary:	Brazil’s production and consumption of açai pulp (Euterpe oleracea) occur on a large scale. Most of the fruit is formed by the pit, which generates countless tons of residual biomass. A new purpose for this biomass, making its consumption highly sustainable, was presented in this study, where activated carbon (AC) was produced with zinc chloride for later use as an adsorbent. AC carbon formed by carbon and with a yield of 28 % was satisfactorily used as an adsorbent in removing the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). Removal efficiency was due to the highly porous surface (Vp = 0.467 cm3 g−1; Dp = 1.126 nm) and good surface área (SBET = 920.56 m2 g−1). The equilibrium data fit the Sips heterogeneous and homogeneous surface model better. It was observed that the increase in temperature favored adsorption, reaching a maximum experimental capacity of 218 mg g−1 at 328 K. The thermodynamic behavior indicated a spontaneous, favorable, and endothermic behavior. The magnitude of the enthalpy of adsorption was in agreement with the physical adsorption. Regardless of the herbicide concentration, the adsorbent displayed fast kinetics, reaching equilibrium within 120 min. The linear driving force (LDF) model provided a strong statistical match to the kinetic curves. AC with zinc chloride (ZnCl2), created from leftover açai biomass, is a potential alternative as an adsorbent for treating effluents containing 2,4-D.

Transformation of residual açai fruit (Euterpe oleracea) seeds into porous adsorbent for efficient removal of 2,4-dichlorophenoxyacetic acid herbicide from waters

Publicaciones similares