Control and implementation of a single wheel holonomic vehicle
This paper proposes a robot balanced on a ball. In contrast to an inverted pendulum with two wheels, such as the Segway. The robot proposed in this paper is equipped with three omnidirectional wheels with DC motors that drive the ball and two sets of rate gyroscopes and accelerometers as measurement...
- Autores:
- Tipo de recurso:
- masterThesis
- Fecha de publicación:
- 2013
- Institución:
- Pontificia Universidad Javeriana
- Repositorio:
- Repositorio Universidad Javeriana
- Idioma:
- spa
- OAI Identifier:
- oai:repository.javeriana.edu.co:10554/12706
- Palabra clave:
- Vehículo omnidireccional
Holonómico
Omniwheel
Rueda esférica
Omnidirectional Vehicle
holonomic
omniwheel
Spherical Wheel
Robótica
Vehículos - Innovaciones tecnológicas
Maestría en ingeniería electrónica - Tesis y disertaciones académicas
- Rights
- openAccess
- License
- Atribución-NoComercial-SinDerivadas 4.0 Internacional
| Summary: | This paper proposes a robot balanced on a ball. In contrast to an inverted pendulum with two wheels, such as the Segway. The robot proposed in this paper is equipped with three omnidirectional wheels with DC motors that drive the ball and two sets of rate gyroscopes and accelerometers as measurement sensors. The robot has a simple design. Inverted pendulum control is applied in two axes for stabilization, and commanded motions are converted into velocity commands for the three wheels. The mechanism, control method, and experimental results described in this paper. |
|---|