Erosion Corrosion Evaluation of CrN/AlN Multilayer Coatings, by Varying the Velocity and Impact Angle of the Particle

In order to provide solutions to erosion corrosion in industrial devices, thin films of CrN/AlN were deposited on AISI D3 steel substrates using a magnetron sputtering system multitarget with rf (13.56 MHz), from Al and Cr targets of high purity (99.99%) in an atmosphere composed by Ar/N2. The erosion tests and corrosion erosion were made by equipment which lets the change of the impact angle and the jet velocity of the silica particle; moreover the equipment is engaged with a potentiostat. The polarization curves were done in the resting potential. Subsequently of the realization of the polarization curves experiments, the samples were analyzed by scanning electron microscopy. The coating performance is compared with the AISI D3 steel without coating. The degradation mechanisms for PVD coating and uncoated steels have been presented with the help of diagrams wear mechanism.

• Autores: Aperador Chaparro, William Arnulfo; Caballero-Gómez, J.; Delgado Tobón, Emilio
• Tipo de recurso: Article of journal
• Fecha de publicación: 2013
• Institución: Escuela Colombiana de Ingeniería Julio Garavito
• Repositorio: Repositorio Institucional ECI
• Idioma: eng
• OAI Identifier: oai:repositorio.escuelaing.edu.co:001/1925
• Acceso en línea: https://repositorio.escuelaing.edu.co/handle/001/1925
• Palabra clave: Erosión; Corrosión; Recubrimientos multicapa; Double layer coatings; multilayered coatings; erosion corrosion; wear; nitrides
• Rights: openAccess
• License: © 2013 by ESG