Análisis de estabilidad de un talud en centrifuga geotécnica
This is a document that studies the stability of slopes, it describes the physical modeling in the geotechnical centrifuge, through which, we want to study the response of a clayey soil to two alternatives for stabilization, the nails and micropiles, the process used for each prototype is described...
- Autores:
-
Becerra González, Pablo
- Tipo de recurso:
- Work document
- Fecha de publicación:
- 2019
- Institución:
- Escuela Colombiana de Ingeniería Julio Garavito
- Repositorio:
- Repositorio Institucional ECI
- Idioma:
- spa
- OAI Identifier:
- oai:repositorio.escuelaing.edu.co:001/1039
- Acceso en línea:
- https://catalogo.escuelaing.edu.co/cgi-bin/koha/opac-detail.pl?biblionumber=22230
https://repositorio.escuelaing.edu.co/handle/001/1039
- Palabra clave:
- taludes
Centrífuga
Modelación fisica
Elementos finitos
slopes
Centrifuge
Physical modeling
Finite elements
- Rights
- openAccess
- License
- Derechos Reservados - Escuela Colombiana de Ingeniería Julio Garavito
| Summary: | This is a document that studies the stability of slopes, it describes the physical modeling in the geotechnical centrifuge, through which, we want to study the response of a clayey soil to two alternatives for stabilization, the nails and micropiles, the process used for each prototype is described in a general way and the methodology used is based on the basic concepts of an undrained condition of the slope. To analyze the modeled prototypes were used an analytical method and finite element software. Subsequently, the safety factors for each modeled prototype were compared. |
|---|